Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
This was sent to me and it worked:In alfaobd, go to CustSetMenu 1: Navigation Turn-by-Turn CSM Present- YES. Reboot the radio twice by holding power down about 10 seconds and the option should show up in settings. Mine is working now with native gps and apple maps as well. Thanks to @Jimmy07
Thank you! I solved this issue with @Jimmy07 as well back then.
What settings you changed in alpha?
What did you upgrade to? UC5 12.1? If so make sure this setting is as follow
Yes 8.4 uc5 with nav to 12.1" I enabled all settings posted in this write up. I think the issue is I bought a superseded radio (still meant for 2022 and 2023 models) and it may actually be a hardware issue.
ICS integrated center stack = not enabled.
Radio: Head unit size = R1_12’-1920 x 1200 is not a setting I changed. Never heard about before actually.
It was set to 8.4. I set it back to original setting and same issue. I bought a used bezel and screen combo on eBay for $500.00. only had a small chip near the mute button and about an inch wide hole drilled through the plastic where the top mounting screws are in the applique. It was p/n for 2023 so I jumped on it. After I completed install with the posted discreps I pull the screen from the bezel and it is p/n 68526524ab which is for 2022/2023 ram 1500 but has been superceded. I ordered 68526597AC as most have in this write up. We shall see.
Okay! let us know if you get it working and good luck.
