Upgrade 2022 8.4 to 12 with Uconnect 5

[skyhawk42]

@Jimmy07 is it possible to turn on turn by turn directions on my evic? I used to have it on my 2021 UC4 12” Big Horn. I upgraded my 2022 UC5 non nav to UC5 12”. Thanks in advance

This was sent to me and it worked:In alfaobd, go to CustSetMenu 1: Navigation Turn-by-Turn CSM Present- YES. Reboot the radio twice by holding power down about 10 seconds and the option should show up in settings. Mine is working now with native gps and apple maps as well. Thanks to @Jimmy07

 

[akostaac]

This was sent to me and it worked:In alfaobd, go to CustSetMenu 1: Navigation Turn-by-Turn CSM Present- YES. Reboot the radio twice by holding power down about 10 seconds and the option should show up in settings. Mine is working now with native gps and apple maps as well. Thanks to @Jimmy07

Thank you! I solved this issue with @Jimmy07 as well back then.

 

[JawKnee]

2022 8.4 UC 5 with NAV. Completed install and configured with ALPHA. Screen works flawlessly but non of the physical buttons/knobs work at all. Can anyone point me in the right direction? Thanks in advanced, this group is great!

 

[akostaac]

2022 8.4 UC 5 with NAV. Completed install and configured with ALPHA. Screen works flawlessly but non of the physical buttons/knobs work at all. Can anyone point me in the right direction? Thanks in advanced, this group is great!

What settings you changed in alpha?

 

[akostaac]

2022 8.4 UC 5 with NAV. Completed install and configured with ALPHA. Screen works flawlessly but non of the physical buttons/knobs work at all. Can anyone point me in the right direction? Thanks in advanced, this group is great!

What did you upgrade to? UC5 12.1? If so make sure this setting is as follow
cabin Net: ICS Integrated Center Stack to “not enabled”.

 

[JawKnee]

What did you upgrade to? UC5 12.1? If so make sure this setting is as follow
cabin Net: ICS Integrated Center Stack to “not enabled”.

Yes 8.4 uc5 with nav to 12.1" I enabled all settings posted in this write up. I think the issue is I bought a superseded radio (still meant for 2022 and 2023 models) and it may actually be a hardware issue.

 

[JawKnee]

What settings you changed in alpha?

ICS integrated center stack = not enabled.
DCSD Display screen module = enabled
RADIO: Head unit size = R1_12'-1920 x 1200

 

[akostaac]

ICS integrated center stack = not enabled.
DCSD Display screen module = enabled
RADIO: Head unit size = R1_12'-1920 x 1200

Radio: Head unit size = R1_12’-1920 x 1200 is not a setting I changed. Never heard about before actually.

 

[JawKnee]

Radio: Head unit size = R1_12’-1920 x 1200 is not a setting I changed. Never heard about before actually.

It was set to 8.4. I set it back to original setting and same issue. I bought a used bezel and screen combo on eBay for $500.00. only had a small chip near the mute button and about an inch wide hole drilled through the plastic where the top mounting screws are in the applique. It was p/n for 2023 so I jumped on it. After I completed install with the posted discreps I pull the screen from the bezel and it is p/n 68526524ab which is for 2022/2023 ram 1500 but has been superceded. I ordered 68526597AC as most have in this write up. We shall see.

 

[akostaac]

It was set to 8.4. I set it back to original setting and same issue. I bought a used bezel and screen combo on eBay for $500.00. only had a small chip near the mute button and about an inch wide hole drilled through the plastic where the top mounting screws are in the applique. It was p/n for 2023 so I jumped on it. After I completed install with the posted discreps I pull the screen from the bezel and it is p/n 68526524ab which is for 2022/2023 ram 1500 but has been superceded. I ordered 68526597AC as most have in this write up. We shall see.

Okay! let us know if you get it working and good luck.

 

[Espinoza@]

I make the swap already . 8.4 to 12 ucconect 5 in the 2 unit . Everything works . But the volumen fob not work. The music just stay in the same level loud. Not low or high . The mute button don’t work . And front speakers . Music settings not work too. Any help @Jimmy07

 

[billfraley]

So, I already have a 2023 with 12 inch. But I have a question on the bezel. Does anyone know if the 22 up bezel is different than the previous years 12 inch bezel? I am upgrading the interior to a higher trim level and may want to swap out the bezel.

 

[akostaac]

So, I already have a 2023 with 12 inch. But I have a question on the bezel. Does anyone know if the 22 up bezel is different than the previous years 12 inch bezel? I am upgrading the interior to a higher trim level and may want to swap out the bezel.

It will fit perfectly! the difference is aesthetics/color. I updated mine with a 2023 TRX bezel since my truck is a Built To Serve edition with carbon fiber interiors details.

 

[mj4200]

Has anyone run into the 12 inch working with every feature except the touch screen not working?

 

[tristainbdts]

i recently did this upgrade on my 2020 1500 going from the base 8.4 to the 12.1 uc5 but now i am having issues with the voice command/ siri button on the steering wheel not working. i can make the voice command come on by saying "hey ram" but holding the button down on wheel does nothing. oddly i can push on the answer button and it will occasionally work. am i missing something or possible a programming issue.