How to: Add Adaptive Cruise Control, Lane assist, FCW & Auto Hi-beam to Ram 1500

[vincentw56]

Question: is this the correct rain sensor part or auto wipers or is this humidity only?
68298468AA
I see some conflicting info on the hdram forum about this - where someone with the same situation used a different part number instead of this one.

Everything I see from searching that part number say it is.

 

[Jimmy07]

Question: is this the correct rain sensor part or auto wipers or is this humidity only?
68298468AA
I see some conflicting info on the hdram forum about this - where someone with the same situation used a different part number instead of this one.

68298468AA is humidity only (dual zone ATC description means humidity):

 

[kldake.kd]

Agreed
I replaced with 69298334 and no more issues/error.

 

[kldake.kd]

System works perfectly now
Thank you to everyone that has contributed to this project. You guys rock

 

[Cmassey31099]

Need some guidance here… I have the rain sensing wipers in my truck from factory so I think that means I may already have parts there but I really want auto high beams is that possible with just changing it in alfaobd? Is there anything else I can also just change in Alfaobd that would give me any other options? TIA


Sent from my iPhone using Tapatalk

 

[vincentw56]

View attachment 150820
Need some guidance here… I have the rain sensing wipers in my truck from factory so I think that means I may already have parts there but I really want auto high beams is that possible with just changing it in alfaobd? Is there anything else I can also just change in Alfaobd that would give me any other options? TIA


Sent from my iPhone using Tapatalk

You should be able to enable auto high beams.

 

[tdb0021]

View attachment 150820
Need some guidance here… I have the rain sensing wipers in my truck from factory so I think that means I may already have parts there but I really want auto high beams is that possible with just changing it in alfaobd? Is there anything else I can also just change in Alfaobd that would give me any other options? TIA


Sent from my iPhone using Tapatalk

Yes, you can enable it in Alfa an it’ll work for you. No modifications necessary.

 

[Cmassey31099]

It worked, also put on my tailgate ajar. I also used JScan, much easier than alfaobd in my opinion

 

[Paco]

I did Auto Highbeam yesterday with jimmy help.

The only problem I had, was the Auto Highbeam did not show up in the uconnect for a couple cycles.
Jimmy suggested I cycle the radio on and off a couple times, and then it showed up.

 

[Cmassey31099]

It worked, also put on my tailgate ajar. I also used JScan, much easier than alfaobd in my opinion

Well I have it in my radio menu, when I flip the lever toward it says auto high beams enabled but they don’t come on at all. Anyone know if I missed something when making changes? I swapped out my auto dim mirror for the rearview mirror with the camera. That was plug and play but could that be an issue?


Sent from my iPhone using Tapatalk

 

[cskindt]

Well I have it in my radio menu, when I flip the lever toward it says auto high beams enabled but they don’t come on at all. Anyone know if I missed something when making changes? I swapped out my auto dim mirror for the rearview mirror with the camera. That was plug and play but could that be an issue?


Sent from my iPhone using Tapatalk

Not necessarily.
I enabled the auto high beams with my auto-dimming mirror and it worked, then later changed my rear view to the digital rear view and my auto high beams still worked without issue.

 

[vincentw56]

Well I have it in my radio menu, when I flip the lever toward it says auto high beams enabled but they don’t come on at all. Anyone know if I missed something when making changes? I swapped out my auto dim mirror for the rearview mirror with the camera. That was plug and play but could that be an issue?


Sent from my iPhone using Tapatalk

If you got that message, it worked. They can be a little sensitive to light so try a really dark road.

 

[Jimmy07]

Well I have it in my radio menu, when I flip the lever toward it says auto high beams enabled but they don’t come on at all. Anyone know if I missed something when making changes? I swapped out my auto dim mirror for the rearview mirror with the camera. That was plug and play but could that be an issue?


Sent from my iPhone using Tapatalk

What do you have 2014 cbc..auto high beam location set to?

 

[Cmassey31099]

What do you have 2014 cbc..auto high beam location set to?

IRCM


Sent from my iPhone using Tapatalk

 

[Jimmy07]

IRCM


Sent from my iPhone using Tapatalk

That setting is only if you have the DASM for FCW and adaptive cruise. You are using the mirror with camera for high beams, so try ecc_AHBM for that setting.

 

[Cmassey31099]

That setting is only if you have the DASM for FCW and adaptive cruise. You are using the mirror with camera for high beams, so try ecc_AHBM for that setting.

I’m out of town for work till Thursday so I’ll give it a try then appreciate the quick response!


Sent from my iPhone using Tapatalk

 

[wsolarczyk]

If your truck came factory equipped with FCW but not ACC, you need the following: (see attached file for additional information).

HCU: 68415320AA ACC w/Stop and Go - $265.55

ABS Module: 68436462AJ Adaptive Cruise Control w/Stop and Go], [Adaptive Cruise Control w/Stop and Go] After 06/06/2018 - $200.64

ACC Button - 68309592AD SWITCH. Speed Control. Right. = $57.05



Lane Keep for 2021 RAM

Requires:

Center Stack 68312620AG – $468.60

Hello, and thank you for a very nice instruction. This is awesome. Can you point me into the right direction of finding which center stack do I need for my 2022 Laramie with 8.5 U5 unit if I don't want to upgrade to the 12" one. I want to do the price comparison. Also, shine some light if you can. If I don't want to add AAC but only Lane Keep, give that my truck has FCW and Rain sensing wipers already.

Thanks,

 

[St-na]

Hello, and thank you for a very nice instruction. This is awesome. Can you point me into the right direction of finding which center stack do I need for my 2022 Laramie with 8.5 U5 unit if I don't want to upgrade to the 12" one. I want to do the price comparison. Also, shine some light if you can. If I don't want to add AAC but only Lane Keep, give that my truck has FCW and Rain sensing wipers already.

Thanks,

p.38 Message from Jimmy07, You can use search function, pretty easy.

 

[Jimmy07]

Hello, and thank you for a very nice instruction. This is awesome. Can you point me into the right direction of finding which center stack do I need for my 2022 Laramie with 8.5 U5 unit if I don't want to upgrade to the 12" one. I want to do the price comparison. Also, shine some light if you can. If I don't want to add AAC but only Lane Keep, give that my truck has FCW and Rain sensing wipers already.

Thanks,

Is it an 8.4” radio with navigation? If you post a pic of your current 8.4 center stack, I can tell you which one you need for LKA.

 

[deeve]

It worked, also put on my tailgate ajar. I also used JScan, much easier than alfaobd in my opinion

Where did you find the settings for those on Jscan, specifically the auto high beam...been looking and cannot find it in the app.