HOW TO: Add 360 Surround View Camera System

[Scarlet Beast]

Like said above. Just buy used mirrors and swap over the components. You just need to drill out the hole. I'm working on a guide. Just haven't had time yet.

I have commissioned someone that is currently working on recreating the bracket. It's looking promising. Once he is done I'm sure he would be willing to print more as there is clearly a demand for them.

 

[bichocr]

Hello Experts,
I have a Ram Limited 2020 with the UC4 factory 360 Sorround Camera System.
I did an upgrade to UC5, to have the new 12” screen and full-size capability with Apple CarPlay.
I bought the following parts and made some changes:

• CVPM new Par #56029964AF
• 12” Screen
• Radio/NAV module
• RAM 12" UCONNECT 5 RADIO INTEGRATION PROGRAMMER + SECURITY BYPAS CABLE
• The UC4 to UC 5 INTEGRATION WIRING HARNESS ADAPTER
• In Body computer Year 2023

So far everything works as expected, except for the 360 Surround Cameras.
I can see all the cameras active individually (Mirrors, Front, Rear), but I cannot see the 360 nor the active gridlines.
I tried AlphaOBD; Radio>CVPM>calibration: but it triggers a lot of alerts on the Cluster and does not allow me to. Tried on the dealer with the Mopar OBDII and the calibration also fails.
Any tip or recommendation on the Alpha, to try to make the Surround works?
Thanks in advance!


View attachment 185042

Hello Team members!
Wanted to let you know some findings.
Finally I was able to calibrate the cameras.
I used the following sequence in case it helps someone else.
1st camera to Calibrate was the front, then the rear, then the right and the last one the left. I did all them with the car suspension in normal, and running at 2mph, with a help of a friend.
Hope it helps if someone encounters the same situation.