What's new
By:
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Jonathan19Limited

Jonathan19Limited

Active Member From DFW, TX
Joined
Last seen
Messages
43
Reaction score
45
Points
18

Profile posts Latest activity Postings About

  • jkosharek
    I am also replacing the door speakers in my 2020 Rebel with the H/K system using Infinity Ref speakers. 3 dash speakers installed using the metra adapters. I ordered 4 REF-9633ix & a set of the 3-1/2 for the headliner.
    View previous comments…
    Jonathan19Limited
    Jonathan19Limited
    I ended up installing the Infinity 3032s in the doors as well. I had to space them out about 3/4" so they would fit vs. the stock 3.5s, and used longer screws accordingly.
    Jonathan19Limited
    Jonathan19Limited
    For polarity, I just matched the +/- of what the stock speakers were being fed from the stock wiring harness to the new speakers. I believe I had to swap the pins in the metra adapters at every single speaker. Basically I just matched the polarity of whatever the stock speaker was getting to the new speakers, whether they were reversed polarity or not. I do not have any any ANC issues by doing it this way.
    Jonathan19Limited
    Jonathan19Limited
    I did not add a sub/amp. I wanted to keep all of my underseat storage space, and did not find a suitable replacement for the stock sub that would work will with the small amount of CF provided by the stock sub box.
  • Loading…
  • Loading…
  • Loading…
Back
Top