Cell Phone Mount

[Nomad]

Have you looked into CarPlay2Air? It is a wireless adapter for CarPlay. I use and it works great.

Hey Skater, do you have a link to the model you purchased? Thanks

 

[Skater]

Hey Skater, do you have a link to the model you purchased? Thanks

Center Dash Mount for RAM 1500/2500/3500/4500/5500

This ProClip Center Dash mount is custom-made for your RAM Truck starting in 2019. (See below for full list of compatibility) The mount attaches to the dashboard to the left of the driver's side vent. Combine with a ProClip device holder to make a custom mounting solution for your phone or GPS...

www.proclipusa.com

CPLAY2air wireless adapter for factory CarPlay on CARPLAY2air.com

Connect wirelessly to your factory Carplay in your Audi, VW, Mercedes-Benz, Volvo or Porsche vehicle what was not possible before. Wired Android auto module inside. Convert wired CarPlay connection to the wireless one!

cplay2air.com

 

[Andymax]

For what it's worth, I use this mount and it works EXCEPTIONALLY well...IF you are OK with magnetic mounting. Similar location to the Proclip, but a more elegant design in my opinion.

For those with 12" UConnect:

Direct Fit Phone Mount - Dodge Ram 1500/2500/3500/4500/5500 (2019+) *S

Fits: Dodge Ram 1500/2500/3500/4500/5500 (2019+) (***Note: This product will NOT fit TRX, or Limited trim models. It will also not fit 2021+ Power Wagons or 2020+ Laramie Longhorn models.***) For these, please see this product: Direct Fit Phone Mount: Ram TRX, Ram Limited (2019-Present) CourseMS...

coursemotorsports.com

For those without 12" Uconnect:

Direct Fit Phone Mount - Dodge Ram 1500/2500/3500/4500/5500 (2019+ New

Fits: Dodge Ram 1500/2500/3500/4500/5500 (2019+) Without 12" screen Finally a phone mount designed specifically to bolt onto your Dodge truck. Unlike the universal vent mounts, stick on mounts or suction cup mounts, Course Motorsports Direct Fit phone mounts are vehicle specific and are...

coursemotorsports.com

 

[Skater]

For what it's worth, I use this mount and it works EXCEPTIONALLY well...IF you are OK with magnetic mounting. Similar location to the Proclip, but a more elegant design in my opinion.

For those with 12" UConnect:

Direct Fit Phone Mount - Dodge Ram 1500/2500/3500/4500/5500 (2019+) *S

Fits: Dodge Ram 1500/2500/3500/4500/5500 (2019+) (***Note: This product will NOT fit TRX, or Limited trim models. It will also not fit 2021+ Power Wagons or 2020+ Laramie Longhorn models.***) For these, please see this product: Direct Fit Phone Mount: Ram TRX, Ram Limited (2019-Present) CourseMS...

coursemotorsports.com

For those without 12" Uconnect:

Direct Fit Phone Mount - Dodge Ram 1500/2500/3500/4500/5500 (2019+ New

Fits: Dodge Ram 1500/2500/3500/4500/5500 (2019+) Without 12" screen Finally a phone mount designed specifically to bolt onto your Dodge truck. Unlike the universal vent mounts, stick on mounts or suction cup mounts, Course Motorsports Direct Fit phone mounts are vehicle specific and are...

coursemotorsports.com

Those are nice and tidy. If I get tired of my ProClip, I will be picking one of those up. Thanks for the links.

 

[BestNThDez]

Concerning the ProClip, I know that the manufacturer says that it's not made for use with trucks that have the "Column Shifter". I have a 3500 with the Column Shifter, and was wondering if you you know if that is a definite "no go", or is it just a bit in the way and one could make it work OK?

 

[turtle6688]

Concerning the ProClip, I know that the manufacturer says that it's not made for use with trucks that have the "Column Shifter". I have a 3500 with the Column Shifter, and was wondering if you you know if that is a definite "no go", or is it just a bit in the way and one could make it work OK?

I had one on my 2013 1500, 6spd with column shifter. If I wanted to put the truck in park and take the key out, I had to turn my phone mount every time. IMO totally worth it for the best phone mount on the market I could find. So yes, it does interfere with the shifter, but not 100%.

 

[tdager]

For what it's worth, I use this mount and it works EXCEPTIONALLY well...IF you are OK with magnetic mounting. Similar location to the Proclip, but a more elegant design in my opinion.

For those with 12" UConnect:

Direct Fit Phone Mount - Dodge Ram 1500/2500/3500/4500/5500 (2019+) *S

Fits: Dodge Ram 1500/2500/3500/4500/5500 (2019+) (***Note: This product will NOT fit TRX, or Limited trim models. It will also not fit 2021+ Power Wagons or 2020+ Laramie Longhorn models.***) For these, please see this product: Direct Fit Phone Mount: Ram TRX, Ram Limited (2019-Present) CourseMS...

coursemotorsports.com

For those without 12" Uconnect:

Direct Fit Phone Mount - Dodge Ram 1500/2500/3500/4500/5500 (2019+ New

Fits: Dodge Ram 1500/2500/3500/4500/5500 (2019+) Without 12" screen Finally a phone mount designed specifically to bolt onto your Dodge truck. Unlike the universal vent mounts, stick on mounts or suction cup mounts, Course Motorsports Direct Fit phone mounts are vehicle specific and are...

coursemotorsports.com

Website down?

 

[unforseenenemy]

Concerning the ProClip, I know that the manufacturer says that it's not made for use with trucks that have the "Column Shifter". I have a 3500 with the Column Shifter, and was wondering if you you know if that is a definite "no go", or is it just a bit in the way and one could make it work OK?

I also have the column shift and cracked my week old(at the time) Samsung s20+ when putting it into park. ... Just a word of caution: be careful

 

[Andymax]

Website down?

Links work for me. Maybe they were temporarily down when you tried?

 

[Chopperbobby]

I use my console .. it is what it was designed for .. do you not have the holder built in?

View attachment 31972

This

 

[Jeeper]

Website down?

will the magnet work underneath thin cases such as Spigen?

Sent from my SM-G781W using Tapatalk

 

[Neurobit]

For those in the MagSafe ecosystem, this seems like a good product with the bonus that it will charge your device.
It’s a vent mount, but with extra support to ensure a snug fit.

Hands on with first MagSafe-compatible car charger from ESR | AppleInsider

One of the most unique and potential-filled features of the iPhone 12 lineup is MagSafe. But months after launch, it is still hard to come by accessories that work well are truly useful. We go hands-on with one of the companies leading the charge with a wide array of compatible gear — ESR.

appleinsider.com

Cheers,

 

[Andymax]

will the magnet work underneath thin cases such as Spigen?

Sent from my SM-G781W using Tapatalk

I believe it will...it's pretty strong. I will try later and let you know.

 

[marcinbike]

Anyone tried to put one of RAM Mount's Tough-Track to the tray above the screen?

 

[NJC1684]

Anyone using the Scosche MagicMount Pro XL along with the ProClip mount? If so, would you recommend ordering the 15* wedge as well?

 

[Crownrealtytrust]

Website down?

Will not fit limited

 

[cpgeorge25]

67 Designs for me.

Sent from my iPhone using Tapatalk

I went to their website but they don't show anything for Rams. Did you buy another kit and customize it to fit? if so, which kit did you buy?

 

[nicolasbvillegas]

Proclip installed using the left a/c vent mount. Recycled the iPhone cradle with power and data cable from a previous vehicle. I popped the radio bezel away to run the wire behind it and it comes out near the media hub. The cell phone holder in the console has a little lip to tuck the extra wire up out of the way inside a crease. I’m very happy with how it turned out. When I put iPhone in the cradle it connects to truck and starts charging immediately.

I have the proclip as well. I was curious how you were able to get the wire behind the radio bezel. I've been very hesitant to pull the bezel too much, fearing that I'll snap/break it. Do you have any resources on how you pulled the bezel or can you explain a bit more on how you squeezed the wire in?

 

[securityguy]

I have the proclip as well. I was curious how you were able to get the wire behind the radio bezel. I've been very hesitant to pull the bezel too much, fearing that I'll snap/break it. Do you have any resources on how you pulled the bezel or can you explain a bit more on how you squeezed the wire in?

Take the two screws out from under the rubber insert next to the cigarette lighter plug at the top of the dash. Then just pull and clips will pop easily. Extremely simple.

 

[Gipraw]

Sometimes the obvious questions are the toughest ones to answer, lol. This thread seems to be a ProClip ad. I love the iphone craddle that is in this truck and with the wireless CarPlay dongle, I dont even wanna or have to see my phone. My take is the power of habit that is making all these posters buy a phone holder. This is one of the more entertaining threads along with the one discussing why to use the cruise control over the adaptive cruise control.

I use a pro clip as well. I use my phone to run Escort Live, so I need to see the phone screen and I like having it in my line of sight.