PorBoy
Spends too much time on here
This is the exact kit that I have installed and exactly what comes with it. 
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups
- Thread starter Jared B
- Start date
PorBoy
Spends too much time on here
Had it dealer installed, and an alignment done asap once installed. 
subaru79
Active Member
Cool, been looking at that kit for a while. I have 2wd Laramie long bed wanted to do the Mopar kit with no rear spacers with shocks all around
PorBoy
Spends too much time on here
My last Ram even though I didn’t need it, had all new higher grade shocks installed.
Did both of you get your sensor issues worked out? I only ask cause I am getting ready to order wheels and tires. I was going to go with ExtremeCustoms.com but they told me they didn't have any sensors that would work with the 19 Ram. So I am speaking with Custom Offsets and they claim they have the right sensors. I am a little paranoid due to stories like both of these. Has anyone dealt with Custom Offsets? How was your experience? Thanks
DOOWORK707
Member
- Joined
- Aug 21, 2018
- Messages
- 19
- Reaction score
- 77
- Points
- 13
- Age
- 30
My new wheels and tires came today for my 2019 Big Horn Sport.
I went with a set of 22x12 -44 offset TIS 544BM Wheels wrapped in 305/45-22 Nitto 420s Tires. This size is comparable to a 33" tall tire.
This setup doesn't rub, and still drives like factory. Rides Very smooth.
For those that didn't see my other post on here, I have a 2.5" MotoFab leveling kit installed.
I went with a set of 22x12 -44 offset TIS 544BM Wheels wrapped in 305/45-22 Nitto 420s Tires. This size is comparable to a 33" tall tire.
This setup doesn't rub, and still drives like factory. Rides Very smooth.
For those that didn't see my other post on here, I have a 2.5" MotoFab leveling kit installed.
Pnorth
Active Member
I vote picture number two!Finally got it looking like a Proper 4x4 truck.
ReadyLift 3.5 SST kit
Fuel Warriors 20x10 -18offset
35x12.50x20 BFgoodrich KO2
Really cool pictures of a cool truck!
PorBoy
Spends too much time on here
I like what you’ve done with it.
PorBoy
Spends too much time on here
Even though I only have a 2” lift on mine, I really feel they should have come factory with a minimum of 3” for that “ look “ .
New wheels/tires arrived today.
Laramie with Black Appearance pkg. Stock height. Considering a 2" level but not committed to the idea yet. Still waiting for sidesteps to ship (dealer says release date is tomorrow 9/1) and debadge (next week).
Tires: Nitto Ridge Grappler 275/60 R 20 (=33"; this is slightly larger diameter than OEM)
Wheels: Fuel Vector 20 x 9 with +20 offset
Laramie with Black Appearance pkg. Stock height. Considering a 2" level but not committed to the idea yet. Still waiting for sidesteps to ship (dealer says release date is tomorrow 9/1) and debadge (next week).
Tires: Nitto Ridge Grappler 275/60 R 20 (=33"; this is slightly larger diameter than OEM)
Wheels: Fuel Vector 20 x 9 with +20 offset
Last edited:
PorBoy
Spends too much time on here
Which side steps are you referring to ? Are you speaking about the Mopar oem ones ?
Yes. OEM black side steps. They haven't been available unless ordered/installed from the factory.
PorBoy
Spends too much time on here
Ok lol I figured you had to mean the black ones as everyone around here has the chrome look ones.
PorBoy
Spends too much time on here
So they are releasing them starting next week in black. Hmmmm, might be something I want to consider in place of my current Mopar ones. Especially since I’m going with a “ tri “ color theme.
VaderRebel
Ram Guru
You mean the ones I went with?
I really like the look. Usually not a tube or board guy, but they fit the Rebel well.
Yes.
PorBoy
Spends too much time on here
The black really seems to blend well .
RBRK
Well-Known Member
Ive seen both 20 and 1 offsets the 20 is 5.75” which is the same as stock. So a 1 is a 5” backspace. I want them pretty much flush with the fender flare so I wouldn’t want the 1 because the stock wheels are tucked inside somewhat correct? I guess the confusion is some have posted 20 offset and the tires look flush and others show 1 and they look flush, guess it depends on the tire may make a difference too. J-Rad’s looks similar to stock which it should be with the 20offset Am I thinking correctly here?.
