lift

Good afternoon, My limited with air ride folks, I will say that I was sad to hear that there aren't many options to lift your vehicle, but I did find that BDS makes a lift kit that should fit the 4x4 air ride. What I didn't know was could that lift kit for the 4x4 air ride suspension fit on...

Maybe someone can shed some light on this, as I've read over 40 pages of different threads and I think I more confused now, than when I started. My truck is a non-ORP Laramie crew cab. I am on the fence between lifting the truck with the 2" Mopar lift, or going with Bilstein 5100s to get <2" and...

I just wanted to get other peoples opinions on my situation. I went to a highly rated custom shop for a lift, wheels, and tires. Selected everything I wanted and got a call to schedule when everything arrived. Scheduled two and a half weeks from when they called me; service was scheduled for a...

What's up everyone. I figured I'd make this post since there are only 2 current kits on the market for the DT Air ride equipped Rams. After hours of searching, there was little to no information on the efficacy of either Rough Country or BDS' kit. Background: I have been tuning (27) cars for...

I removed my active air dam and plastic air dam. I love love love the look and extra ground clearance and if anyone needs one let me know, located in suffolk, VA and can travel. But one thing i couldnt help but notice is the front of the motor is pretty exposed. Anyone have any skid plate...

Good Evening all. I'm a proud NEW owner of a 2021 Ram Rebel, also new to the community. coming from a 370z&Infiniti Q50 RS this is definitely a whole different kind of experience . Already did my Borla Atak & 5% Tints all around the truck including windshield. Thing looks BAD @SS! Truck has 500...

I have a 2019 Ram 1500. I went to a custom shop today to look into a lift, tires, and wheels. I wanted the 4 inch BDS lift but they can only get the 4 inch Zone lift and said they are pretty much identical. Does anyone have a 4 inch zone lift and can comment on the ride quality?

Have any of you guys had or know of any issues running the rough country 3.5 (with replacement struts, not spacers) on the Rebels? I know of issues with using the 1” taller factory bilstein struts in combination with the RC spacers up front, but am wondering if running the kit with the upgraded...

I've read literally a thousand posts and LOTS of good info, but I can't really find where someone has used a 2" front level and 2" rear lift (puck) to make an inexpensive lift. I don't do much offroading, but may do some weekend stuff. Recommendations and pics would be great if you have used...

Does anyone know if the BDS 4" lift or the RC 5" lift are compatible with a 2021 Ram 1500 limited with the 5.7L gas engine? Thanks for your help in advance.

I just got my 2020 Rebel with air suspensionI’m looking at doing the RC 5” Air Ride Lift. I read on here seems to be a good lift. Anyone with ride quality differences? Also debating between the N3 shocks or the additional $200 monotube V2 shocks if it’s a smoother ride? Seeing what might be...

Had to wait almost 2 months for kit, wheels, and tires to deliver, but it was worth it! Super happy with how it turned out. Shoutout to NorCal Motor Company in Auburn, CA for putting the truck together. Nitto Ridge Grapplers 35x12.5 Method Mesh MR606 20x10 -24 offset

Had my 2020 Limited EcoDiesel lifted 5” with the Rough Country lift for Air suspension a few weeks ago. Paired it with the stock 22” from the black appearance package and 35x12.50x22 Milestar Patagonia MT tires. Must say I love it. Rides like stock, slightly tougher due to more aggressive tires...

Hello everyone, new to the thread over the couple of weeks. I’ve been reading a ton on here but haven’t found someone that did stock 2020 limited black 22s on 35x12.5x22 nitto ridge grapplers I plan to do a RC 5” lift and with 35s on the stock wheels. I like them but I notice that everyone...

Just curious if anyone has used these coil overs on a Rebel yet. I might buy these because I only want 3/4'' to 1'' of lift. On the Rebel they say it lifts the front 3/4''. They are pricey but Im assuming they are a quality product...

Haven’t seen much for people with 37s on the new rams so here’s mine. Started with a level and 33X12.5s.. hated the look so I went 6 inch bds lift with 35s. Got full length king coil overs for the front. But still didn’t look right. I think I read somewhere that they increased the waist line on...

I just found out from reading the forum that preload spacers are trash ( the one that go in the coil) Everyone say top hat pucks are wayy another on the ride quality (the ones that you don’t have to disarm the strut) any who, anyone here running 3.5 puck? I have new RC control arms and want a...

Can everyone that are running these kits Post an image below? *Rough country 3.5 or ReadyLift 3.5 *Tire brand *Tire size *Wheel size

Anybody Install a Body Kit lift of around 2-3 inch for the front and rear. and have pictures and install instruction. I don't want to do a suspension lift. I have been toying with pulling the trigger on PERFORMANCE ACCESSORIES PA60402 https://www.suspensionconnection.com/60402-ram-1500.html or...

I don't like the deep bounce when I am towing my travel trailer. I installed the Air Lift bags in my coil springs. I would like a system that is more substantial. What do you recommend?