5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

Saunders55

New Member
Joined
Aug 23, 2020
Messages
2
Reaction score
0
Looking to put some 1.5” wheel spacers on my 2020 ram 1500 built to serve. I don’t want to have to cut the lugs. Anyone know if I’ll be okay running a 1.5” spacer ?

If so will I need to do an alignment after installing them ?
 
Last edited:

BuilttoServeRam

Active Member
Joined
Jul 10, 2020
Messages
65
Reaction score
57
Looking to put some 1.5” wheel spacers on my 2020 ram 1500 built to serve. I don’t want to have to cut the lugs. Anyone know if I’ll be okay running a 1.5” spacer ?

If so will I need to do an alignment after installing them ?

I have the same truck and was gonna do 2” hub centric Bora Spacers . Our truck has clearance on the inside of the wheels for clearance of the wheel studs to allow for 1.25 minimum without trimming. I’ve seen our truck with 1.5 and it looks good . No need for an alignment either
 

BuilttoServeRam

Active Member
Joined
Jul 10, 2020
Messages
65
Reaction score
57
link for Bora spacers for our truck
 

frnkochoa

Member
Joined
Aug 21, 2020
Messages
19
Reaction score
3
8 week lead time for bora spacers... unbelievable. Where else can i get our hub dimension, 2) 1" and 2) 1.25" hubcentric high quality.
 

Fantastipotamus

Active Member
Joined
Dec 13, 2018
Messages
91
Reaction score
54
Location
New Hampshire
I’m curious about the thinner spacers, like the 1/2” or less. Do those fasten the same way the larger ones do? IE tighten the existing lugs over the spacer, then mount the wheel on the spacer studs? Or are they just a plate with holes that slide over the existing studs.

I‘m definitely not interested in trimming studs to accommodate the thinner spacers, and not sure I’d want a 1” or so.
 

BuilttoServeRam

Active Member
Joined
Jul 10, 2020
Messages
65
Reaction score
57
Yes correct the thinner spacers are a plate that slides over your existing lugs and the wheel goes on the existing lugs giving you less thread for your lugs
 

BuilttoServeRam

Active Member
Joined
Jul 10, 2020
Messages
65
Reaction score
57
I just ordered 2” Bora Spacers cause I wanna little more of an aggressive look. Bora do take a little Longer to get and are more money but are the best. When spending a lot of money on a truck and have a family I would rather have a piece of mind
 

lilteco71

Member
Joined
Apr 3, 2020
Messages
9
Reaction score
0
Location
Panama
I just ordered 2” Bora Spacers cause I wanna little more of an aggressive look. Bora do take a little Longer to get and are more money but are the best. When spending a lot of money on a truck and have a family I would rather have a piece of mind
Did you order steel or aluminum ? Did you have some photo of the stace ?
 

Samseed15

New Member
Joined
Jan 29, 2021
Messages
2
Reaction score
0
I have the same truck and was gonna do 2” hub centric Bora Spacers . Our truck has clearance on the inside of the wheels for clearance of the wheel studs to allow for 1.25 minimum without trimming. I’ve seen our truck with 1.5 and it looks good . No need for an alignment either
Did you put 2" spacers for rear and front?
 

akostaac

Member
Joined
Jun 30, 2021
Messages
13
Reaction score
19
Location
Florida
Looking to put some 1.5” wheel spacers on my 2020 ram 1500 built to serve. I don’t want to have to cut the lugs. Anyone know if I’ll be okay running a 1.5” spacer ?

If so will I need to do an alignment after installing them ?
I just did mine with 275/60R20 nitto ridge and 1.5inc wheel spacers all around. No need to cut studs down. Oem suspension and no orp. No rubbing at all
 

Attachments

  • A50DF339-E5C7-4845-817C-0E3B8B144A9A.jpeg
    A50DF339-E5C7-4845-817C-0E3B8B144A9A.jpeg
    164.1 KB · Views: 76
  • 991C820B-8A53-487C-9F87-BA9A13BD6263.jpeg
    991C820B-8A53-487C-9F87-BA9A13BD6263.jpeg
    124.8 KB · Views: 79
  • 4CBB6B8C-52B4-4759-A1F9-DEAE1ED43FC2.jpeg
    4CBB6B8C-52B4-4759-A1F9-DEAE1ED43FC2.jpeg
    128.8 KB · Views: 77

Users who are viewing this thread

Top