What did you do to your Ram today???

[PurpleRT]

Debadged it, and removed the sport sticker off the bed side always hated it just never got around to messing with it. Passenger fender liner was also removed and dropped off at the body shop to be resprayed had a oh sh*t moment.


Sent from my iPhone using Tapatalk Pro

 

[JoeCo]

Don’t the new limited models have metal pedals, are those available for purchase somewhere?

They advertise them as part of the 10th anniversary longhorn (2021) and 10th anniversary limited (2022) packages, but as far as I know none of the longhorns actually came with them. We will see if the limiteds do or not but I wouldn't count on it.

 

[djevox]

Debadged it, and removed the sport sticker off the bed side always hated it just never got around to messing with it. Passenger fender liner was also removed and dropped off at the body shop to be resprayed had a oh sh*t moment.


Sent from my iPhone using Tapatalk Pro

Haha, I got rid of the sport badges also- it took me 38 minutes of ownership (the length of the drive home) to want to get rid of them.

 

[rylock21]

Nice. What # tint did you use to match the rear?

They told me 20% was the closest to the rear. Was going to tint everything to get better heat rejection but I live in a pretty mild climate so didn’t care too much.


Sent from my iPhone using Tapatalk

 

[Quint]

I took someone else's idea and painted my tires. Since the "etorque" badge on the hood is blue, I went with blue tire paint.



I love the look, but this was a big pain to do. I had to pull the tires off in order to paint them on a table. Also, the words on my tire are recessed with rubber ribbing inside. That was really hard to spread tire paint over. Before I finished, I ran out of paint. With the little bit I had I decided to just paint the outlines. That was temporary until I was able to get more paint pens. I think that in the future (when the paint wears off) I will just do the outlines. Fun little project though.

 

[broman66]

Had mine done a couple most ago. Runoff is biodegradable. I used NH Oil.

I had NHOU done last fall and had NO smell or dripping. They kept my truck overnight. Maybe that's why. I will probably bring it back for a touch up (if needed) before every winter.

 

[ferraiolo1]

Got a great deal on this from a fellow member.

I expect no gains, just some intake noise and looks

Sent from my iPhone using Tapatalk

 

[SKT Customs]

Installed Mopar LED third brake light and Mopar bed step today. Bed step is so nice to have!

View attachment 106291
View attachment 106292

View attachment 106293

how much does that factory LED cost? and where can i buy it? thanks!

 

[jgreene]

I had NHOU done last fall and had NO smell or dripping. They kept my truck overnight. Maybe that's why. I will probably bring it back for a touch up (if needed) before every winter. View attachment 106592View attachment 106593View attachment 106594

The oil spray is amazing. Definitely helps minimize the rust. Especially if you give a good clean in the spring to get rid of any dirt. Then spray it.

I took my spare off and put a silicone spray on the rubber from Krown. Coated the rim with Krown oil too.

 

[HemiDude]

Working on adding some accent piping to match the limited gauges

Nice!

 

[HSKR R/T]

I took someone else's idea and painted my tires. Since the "etorque" badge on the hood is blue, I went with blue tire paint.

View attachment 106581 View attachment 106582

I love the look, but this was a big pain to do. I had to pull the tires off in order to paint them on a table. Also, the words on my tire are recessed with rubber ribbing inside. That was really hard to spread tire paint over. Before I finished, I ran out of paint. With the little bit I had I decided to just paint the outlines. That was temporary until I was able to get more paint pens. I think that in the future (when the paint wears off) I will just do the outlines. Fun little project though.

View attachment 106583

Outlines look better than whole letter

 

[Quint]

Outlines look better than whole letter

Agreed, except the first thing I did was fill in a letter. Once I realized that the outlines looked better it was too late.

It looks pretty slick from a few paces away and probably has a nice blue streak when rolling down the road.

 

[BilletLaramie57]

how much does that factory LED cost? and where can i buy it? thanks!

Too much in my opinion, but around $330 plus shipping or not and taxes. Part number is 68444540AB. High cost mainly comes because there is a camera in it.

 

[BilletLaramie57]

Put in the Moe’s throttle body today. Haven’t driven it yet as I installed it at work. Will see how it works with the Diablo Tune at lunch time

 

[SKT Customs]

Too much in my opinion, but around $330 plus shipping or not and taxes. Part number is 68444540AB. High cost mainly comes because there is a camera in it.

Oh wow I didn’t realize it had cameras and stuff. I don’t have any tuner or tazer product to add the cameras so that’s useless for me. Thanks! It looks wayyy better though

 

[HSKR R/T]

Oh wow I didn’t realize it had cameras and stuff. I don’t have any tuner or tazer product to add the cameras so that’s useless for me. Thanks! It looks wayyy better though

Takes more than a Tazer or alfaOBD to get the camera to work. There is a whole wiring harness and rearview mirror, and people who have tried in the 19-20 trucks say it still won't work.

 

[ReLLIK75]

Put in the Moe’s throttle body today. Haven’t driven it yet as I installed it at work. Will see how it works with the Diablo Tune at lunch time

View attachment 106615

Definitely interested in your feedback on this. I've also got a diablo tune and AFE shorty headers. A throttle body is potentially next on my list of upgrades.

 

[User_67930]

I removed my headlights.....


Then I put them on a table...


Then I cut them open......


To be continued........

 

[User_63152]

Bought a Bedrug tailgate cover. It's mainly for my grandson, who likes to sit up there. A little bit more padding.

Looks alright, I guess. I wish the hook and loop Velcro was of better quality. I think it would be better if the top had a hook and loop strip all the way across. I might switch it out.

 

[HSKR R/T]

Bought a Bedrug tailgate cover. It's mainly for my grandson, who likes to sit up there. A little bit more padding.

Looks alright, I guess. I wish the hook and loop Velcro was of better quality. I think it would be better if the top had a hook and loop strip all the way across. I might switch it out.

My experience with bearing is the supplied hook/loop strips are more than sufficient and good quality.