5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Revel Performance lift links for air ride suspension

Ok great, thank you

You’re gonna love it

4667b28c3dda008557cde79031adc302.jpg



Sent from my iPhone using Tapatalk
 
Hello hello and thanks to evry one
i m from belgium and i like to no if 35 12.5 20 tires are ok on stock 20 /9 (offset ??) black stock wheels from the black option apparence (bighorn)
With thé revel lift kit front and rear.
If you havé somes pictures

Sorry for my talking !!!!

Fred

R
 
Hello hello and thanks to evry one
i m from belgium and i like to no if 35 12.5 20 tires are ok on stock 20 /9 (offset ??) black stock wheels from the black option apparence (bighorn)
With thé revel lift kit front and rear.
If you havé somes pictures

Sorry for my talking !!!!

Fred

R
It will be close 295/65/20 would be better
 
Hello hello and thanks to evry one
i m from belgium and i like to no if 35 12.5 20 tires are ok on stock 20 /9 (offset ??) black stock wheels from the black option apparence (bighorn)
With thé revel lift kit front and rear.
If you havé somes pictures

Sorry for my talking !!!!

Fred

R

I played it safe and got 285x65x20 that’s equivalent to 34.6x11.2/20
 
Just installed the links and spacers w 35’s going on Sat. Will let you guys know on clearance. Have a Rebel
 
Newbie/lurker. I got the links today and put them on but I seem to have 1/4" or so dip on the drivers side. I have taken them on and off and matched them up exactly and same result 3x over. If I adjust the drivers side it seems to lift both sides. Super frustrating. After I adjust them I get in the truck and lift or lower the system and then put it back to normal. I'm not driving around the block so maybe that is the issue? I've sent an email to Revel about this but wanted to know if anyone on here ran into this.

I have a feeling this is something to do with my limited knowledge of the air suspension. Maybe it will auto level once I drive it a bit.
 
Revel rep said that the Ram has a 1/4 dip on the drivers side from factory. Wish they would have stated that in the directions.
 

Users who are viewing this thread

Back
Top