Rear wheel house liners

[jabara572]

I’m sure this has been asked and listed 1000 times in this thread, but could you give me the breakdown of the exact parts I need to order? For 100 bucks shipped I will be ordering a set tonight. Thanks!

This is all i needed, I may have only needed 2 screws but I forget.

06510175AA​

4

$ 0.79​

SCREW. Tapping Hex Head. M4.8X1.59X32.80.

68275911AB​

1

$ 41.32​

SHIELD. Wheelhouse. Left. [MOPAR Rear Wheel Well Liners], [Rear Wheelhouse Liners].

68275910AB​

1

$ 41.32​

SHIELD. Wheelhouse. Right. [MOPAR Rear Wheel Well Liners], [Rear Wheelhouse Liners].

 

[WA-G]

This is all i needed, I may have only needed 2 screws but I forget.

06510175AA​

4

$ 0.79​

SCREW. Tapping Hex Head. M4.8X1.59X32.80.

68275911AB​

1

$ 41.32​

SHIELD. Wheelhouse. Left. [MOPAR Rear Wheel Well Liners], [Rear Wheelhouse Liners].

68275910AB​

1

$ 41.32​

SHIELD. Wheelhouse. Right. [MOPAR Rear Wheel Well Liners], [Rear Wheelhouse Liners].

This is all i needed, I may have only needed 2 screws but I forget.

06510175AA​

4

$ 0.79​

SCREW. Tapping Hex Head. M4.8X1.59X32.80.

68275911AB​

1

$ 41.32​

SHIELD. Wheelhouse. Left. [MOPAR Rear Wheel Well Liners], [Rear Wheelhouse Liners].

68275910AB​

1

$ 41.32​

SHIELD. Wheelhouse. Right. [MOPAR Rear Wheel Well Liners], [Rear Wheelhouse Liners].

Might I ask where you found them this cheap? Was there any shipping?

 

[KP_98]

Might I ask where you found them this cheap? Was there any shipping?

Most mopar parts websites are around that price. If you do not have factory fender flares, you're going to need more screws. 10 would be a safe bet.

 

[jabara572]

Might I ask where you found them this cheap? Was there any shipping?

"FYI I just bought the liners and 4x screws for $99 shipped at Chrysler Jeep Dodge City of McKinney online. "

 

[KP_98]

"FYI I just bought the liners and 4x screws for $99 shipped at Chrysler Jeep Dodge City of McKinney online. "

Dodge City, Kansas??


Sent from my iPhone using Tapatalk

 

[Bearman95]

I purchased the right and left wheel liners yesterday along with five extra screws from my dealer for $131 and change which included tax. It was going to cost me in the neighborhood of $225 getting them from Bam wholesale!

 

[Tex_Ram]

I purchased the right and left wheel liners yesterday along with five extra screws from my dealer for $131 and change which included tax. It was going to cost me in the neighborhood of $225 getting them from Bam wholesale!

Well damn.. I spent $167 shipped a few weeks ago from Rock Auto.. Wish I would of looked around a bit more.

 

[The Critic]

Installed mine today. I did not separate the existing factory 2-piece rear liner. No issues at all.

Not sure why the YouTube videos are recommending this step?

 

[GraniteRam]

Because that's the way they come installed from the factory.

 

[The Critic]

Because that's the way they come installed from the factory.

That is odd. The catalog only shows one part number (68365746AA) for that 2-piece liner.

 

[Dahknes]

I added liners as part of my purchase agreement. My dealer had my truck for 2 days and determined "the tech couldn't make the liners work, and there are none available that work with your truck because of the Ramboxes." Thanks to this thread, I ordered liners for my truck and installed them myself (and saved about $100). Stopped by the dealer today to show them and let them know how F'n stupid they are, get my refund, inform them I would not let them touch my truck for anything if they can't even figure out the liners. Anyways...thanks to all that contributed to this topic. FYI, I picked up a couple extra trim screws at Lowes for next to nothing. #10 auto trim screws. A bit shorter and phillips head, but worked just fine. Also FYI, I did break one white clip, so just put in a short bolt with lock nut in place of the clip. Will simply need to loosen slightly if the need ever comes up to remove that piece of trim again.

Good to know they fit with ramboxes, going to be ordering for my rebel. Thanks to everyone else as well who posted the part numbers.

 

[Ochoa1801]

Well damn.. I spent $167 shipped a few weeks ago from Rock Auto.. Wish I would of looked around a bit more.

View attachment 60686

Do you need 10 screw ?

 

[Tex_Ram]

Do you need 10 screw ?

Since I didn't have the factory fender flares, yes.

 

[RookieDDZ]

Well, finally got around to installing mine tonight. Really like the way it looks.
I have fender flares so I needed one extra screw for each side. I also did not separate the back half-liner, and everything fit just fine.
I even had time to drop in my Weathertech mud flaps. Simple easy

 

[eFlick]

Has anyone tried the Rough Country Liners? They look like MOPAR.

 

[RookieDDZ]

Has anyone tried the Rough Country Liners? They look like MOPAR.

I don't believe they have them for the next gen Ram. My buddy used them on his Ford F-150 and they look good.

 

[2020GraniteBH]

Has anyone tried the Rough Country Liners? They look like MOPAR.

Curious about this as well

 

[delastatte]

whats the best website to order these ? couldnt find anything that doesnt charge the same amount as the part for shipping . thanks !




edit :
Ordered from McKinney 128.72 shipped to NY

 

[RookieDDZ]

whats the best website to order these ? couldnt find anything that doesnt charge the same amount as the part for shipping . thanks !




edit :
Ordered from McKinney 128.72 shipped to NY

You just have to search around. This thread is full of options. Check out dealers and see if they have a coupon. I got mine from RockAuto as it was a few bucks cheaper than the dealer. I was watching fenders for awhile and saw the price rise. I think I spent about that much in total and missed the boat on the $100 train. But I have them, and installed, and I'm happy.

 

[Guistwite04]

I just happened to see these on Rough Country’s website. Has anyone tried these??