Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I got back home from business trip and tried one more time Your procedure. This time I had no noise as before, but I was somehow able to clear C10D0 error code. Thank You one more time! You put the final point to this project, no more open questions, no dealers to be involved. @Jimmy07 @tdb0021 Thank You for making this project happen.
Center stack part number is shown in the second post of this thread, You would need also radio module. For the swap from 8" to 12" and all details we have a thread in this forum.
The 8.4” radio bezel that you need, that would have the button for lane sense, is only available on the bezel for the 8.4” with navigation screen, and doesn’t really fit around your 8.4” non nav screen. I’m sure you can modify the bezel a little bit to make it work if you’re completely against swapping to the 8.4” with nav radio. The center stack mentioned in the second post is for a 12” screen, so you don’t want that (unless you’re going to do the full 12” radio swap). Start by searching auto trader for a truck that has the 8.4 bezel with all the controls on it you’re looking for. Copy the VIN of that truck, and call any dealership parts department and ask them what part number it is. The name of the part you would be asking about is called Center Stack Controls, Lower Upper.
Lane assist and auto park have nothing to do with the radio, but center stack. Attached parts list one more time, shown in 2nd post, You need to add radio module only. I guess You have DASM already.
You would need everything I think. DASM, ABS/HCU, button, and center stack.
Do You have Forward Collision Warning Plus, 21 Rebel should have it? I believe You have DASM already. if so, check PDF attachment on this page.
Yes, I have forward collision warning. The only features I don't have is adaptive cruise, auto headlight brights, and lane keep assist. I figured I had just about every sensor needed?
Sounds like we have similar builds. All i needed for Lane Keep was the front radio bezel with the physical buttons and the AlphaOBD changes. Lane Keep worked perfectly. I added the Parking stuff, mostly just because I had that Parking button there also. I still haven't done the Adaptive Cruise stuff, but I have all the parts already, just need some time...but you already have the DASM and all the really hard stuff.
If you have a TRX, all you need is switch and programming. If you don’t have a TRX, you will also need the abs module and HCU. Call any dealership parts department and they can confirm for you what abs module part number you currently have.
No, as we already found out earlier in this thread.
I see now. The function of the FCW and ACC is different based on gradual braking. Bummer, I thought I had what I needed.
Hi Stepan,
Do You have a key or button in "RUN" position, during programming?
Thank you for the reply, I was actually just coming back to edit my post and mention that I realized I had it in ACC and think all the codes have cleared! Still have to install the button in the steering wheel and enable functionality for final test.
