8.4" to 12.1" screen replacement

[19RamLimited]

Finally got the pics I needed and this is what you need to do

 

[Ram41313]

Finally got the pics I needed and this is what you need to doView attachment 16290

Finally got the pics I needed and this is what you need to doView attachment 16290

ok by doing this does it work did you change the module?

 

[19RamLimited]

I don't do this I have the 12 " but this is the difference in the 8 pin plugs

 

[Ram41313]

I don't do this I have the 12 " but this is the difference in the 8 pin plugs

Ok thanks I have the 8inch with nav and bought the 12 inch just wondering what I have to do to make it work?

 

[Ram41313]

Ok thanks I have the 8inch with nav and bought the 12 inch just wondering what I have to do to make it work?

Or is this just to get the 4ways to work and knobs?

 

[19RamLimited]

Everything is the same the 8 pin plug has to be repinned so all the buttons work.

 

[Ram41313]

Everything is the same the 8 pin plug has to be repinned so all the buttons work.

So I shouldn’t have to change the module?

 

[19RamLimited]

Yes you absolutely have to change the module

 

[Ram41313]

Yes you absolutely have to change the module

Thanks

 

[19RamLimited]

Make sure you get the module that is correct for the screen you are upgrading to

8.4 no nav is one piece
8.4 Nav is two pieces
12.1 two pieces

TTHe module for the 8.4 nav and 12.1 is different

 

[Ram41313]

Make sure you get the module that is correct for the screen you are upgrading to

8.4 no nav is one piece
8.4 Nav is two pieces
12.1 two pieces

TTHe module for the 8.4 nav and 12.1 is different

Thanks for the info

 

[Troys 2019 bighorn]

Contact me I have the fix

https://www.factoryradioparts.com/p...e-differential-signal-jumper-cable-05064684ad

 

[Troys 2019 bighorn]

https://www.factoryradioparts.com/p...PnnKe9y2FcyYX6z-TGWC_986OjO9E-BoC7rIQAvD_BwE#. That’s for the 8.4 not the 12.1 the pic I added is the right model number you need for the 12.1

 

[Troys 2019 bighorn]

Pics are of the plug that needs rewired and the cable you will need if you don’t have nav first if you have nav your truck will have that connector. I was told the 12.1 module will be available by the end of February with unlockable code

 

[nickbp28]

I have been trying to follow the thread but its 10 pages long. So if I have the 8.4 w/nav in order to change to the 12, I need the screen and make sure the module comes with it?

 

[Neurobit]

I have been trying to follow the thread but its 10 pages long. So if I have the 8.4 w/nav in order to change to the 12, I need the screen and make sure the module comes with it?

That, and re-pin your connectors as 19RamLimited described a few posts above.

 

[nickbp28]

That, and re-pin your connectors as 19RamLimited described a few posts above.

thanks, im looking at some on Ebay, would you be able to tell if the module is there in the pictures? The reason I ask is the seller has not replied yet.

 

[ksn240]

thanks, im looking at some on Ebay, would you be able to tell if the module is there in the pictures? The reason I ask is the seller has not replied yet.

Typically sellers are selling just the screen only. The module is separate.

 

[nickbp28]

Typically sellers are selling just the screen only. The module is separate.

where can you get the module?

 

[Troys 2019 bighorn]

https://www.factoryradioparts.com/p...3zL8JbBOulSmcFfJ_YyAdQIN9e_M3lgUaAqGoEALw_wcB. They finally fixed it today as I contacted them and let them know the 8.4 will not work with the 12.1