2025 Ram 1500 Current Owners - Discussion, Feedback, and Problems

[KevInSD]

Well I picked my BigHorn up today (traded in my '19 BigHorn) and I'm really liking it so far. I had about an hour drive home and the Hurricane is smooth as silk. This one has the bigger 12" screen which will take a little time to get familiar with but overall I'm happy with the truck. Hopefully that continues to be the case! I put over 40,000 miles a year on so this will get a great test over the next few years.

Here's a quick picture I took when I got home and a picture of what it's replacing.

 

[firecadet613]

Well I picked my BigHorn up today (traded in my '19 BigHorn) and I'm really liking it so far. I had about an hour drive home and the Hurricane is smooth as silk. This one has the bigger 12" screen which will take a little time to get familiar with but overall I'm happy with the truck. Hopefully that continues to be the case! I put over 40,000 miles a year on so this will get a great test over the next few years.

Here's a quick picture I took when I got home and a picture of what it's replacing.

View attachment 187988 View attachment 187987

Really like that new front end! Can't really tell it's a big horn.

 

[CORL]

Nobody makes a front receiver for the 2025 RAM 1500 unless you want to cut off the front steel bumper.

 

[Spiltty]

Will be interesting to see also what octane of fuel is used. I have been running nothing but 93 and so far have not had an issue in 2,800 miles.

I have only used 93 and I have a misfire code in cylinder 2, 4 and 5..1800 miles
Waiting on star engineer

 

[Bsenra11]

Hey all!
Does anyone have a wiring diagram for the tail lights on the 25’s? Trying to install a tailgate light bar and need to hardwire it into the tail light

 

[larryinokc]

Yes, from what I'm finding the tow hooks should work. Looking at a couple trucks that had the tow hooks their does not appear to be a separate bezel for the 2025, the cut outs are in the plastic part of the lower grill now with the bezels already kind of built in with the covers behind them. All you should have to do is push the tabs on the back side of the covers to remove. I see mopar sites selling kits for the 2025's with the old bezels, they clearly will not fit and are not needed.

View attachment 184871

Just pop them out from the front with a screwdriver or the end of a broom handle. They're not screwed in any more. They'll push right out. Good news is, the passenger side tow hook is a cake walk. The driver side, not so much. The passenger side took me 10 minutes at best, the driver side, however, ate up most of an hour. Lots of stuff in the way. This was done laying on my back in the driveway.

 

[larryinokc]

Hey all!
Does anyone have a wiring diagram for the tail lights on the 25’s? Trying to install a tailgate light bar and need to hardwire it into the tail light

The 25 tail lights work in tandem top/bottom with each other, not independently of each other like the 24 on down incandescent versions . The wiring harness is easy, surprisingly old school(ish).