5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. K

    Least Expensive Deionization Inline Filter That Actually Worked

    There are a lot of brands and types from $30 to the moon. What has worked best for you to reduce water spots. Thanks
  2. K

    All The Holes In A 6' Bed

    Finally got around to doing this. I bought a package of 20 M6 Hex Stainless Steel Rivet Nuts and some SS eye bolts with them. $6.50 for 20 of them. I tried the DIY bolt with washers and broke the bolt off. Then the next one couldn't tighten enough. Stopped and ordered a $32 tool online...
  3. K

    All The Holes In A 6' Bed

    The reason I've been so picky, is that I've been on the phone with a couple of manufacturers and they recommended 5/16 vs m6 as a better fit and also claimed the stainless steel are much harder to crimp. Could you just take one out of your package and slip it in one of the hex holes and see if...
  4. K

    All The Holes In A 6' Bed

    TTT---Just waiting for someone to post up with link to the right ones that they installed and are pleased with.
  5. K

    All The Holes In A 6' Bed

    Thanks for the link---It doesn't show a price or the dimensions. Just put one in any of the stamped holes that your not going to use for practice. Does the hex fit snuggly just inserting by hand? What was the price? Thanks
  6. K

    Bedrail rivnuts

    Also looking for the proper fit for these. Refuse to pay $10.50 a piece at Mopar. You can get like 50 of them online if you can find the right size.
  7. K

    All The Holes In A 6' Bed

    Thanks for posting. I've never used rivet nuts before. That does seem like the best option. My holes are stamped as hex 3/8" in diameter which is 9,525mm. I can't find either of those sizes in the hex. If you or anyone reading has found the correct ones, please post up. Thanks
  8. K

    All The Holes In A 6' Bed

    Is there a diagram available that shows what all the empty holes are intended for? The larger holes in the corners I utilized by putting in Marine stainless steel eye bolts, ( work well and look nice/clean). In the side walls there are some 3/8" hexagon shaped holes, but the metal is very thin...
  9. K

    Ram Dealership

    Yes---This is my daughter who is single and by herself and without a clue and very very trustworthy of everyone---Going forward I'll do her oil changes and light maintenance.
  10. K

    Change Muffler

    You said " Mufflers " plural. isn't the 5,7---2 into 1 with just one muffler?
  11. K

    Ram Dealership

    Just recently my daughter got a " special price deal " solicitation, to change her air filter and cabin filter in a 2021 Grand Cherokee for---Are you ready---$210 plus tax. I changed both of them for her in about 5 minutes for $35. This is where the term STEALERS/DEALERS basically comes from...
  12. K

    Price negotiated from MSRP

    Out here in Ca many dealers will advertise a loss leader. And when folks go to see it, it is nowhere to be found, ( sorry just sold ). I chased one down by calling when I was relatively near, ( no chance for it to be sold ). So when I got there I was assigned a sales person who said the...
  13. K

    Warranty Question

    John---Thanks for taking the time to post up---Appreciate it.
  14. K

    Warranty Question

    Thank you for posting these contacts. Curious how you came up such wide spread references. Also do you need to be still under the factory warranty while obtaining an extended one?
  15. K

    Warranty Question

    I purchased my 21 Ram in November of 2020. In Nov of 2023 my factory warranty will expire. The truck only has 6K on it at present and probably 7K when warranty runs out. I never got to use it for the purpose it was purchased for. What would you guys recommend in a situation like this. Thanks
  16. K

    Oil Question

    My Ram has 6K on it. First oil change at about 4500. So in 1500 miles the oil level is full but the color of it is a dark burnt amber. Is this normal because the Hemi runs hot? I have a 2004 Grand Cherokee with the 6.0 and at every oil change the color is clear, never dirty or defiled...
  17. K

    Price negotiated from MSRP

    Now that is good business. Following online forums to see customer input about your business is just solid. I wish some of the online banks I deal with would do the same.
  18. K

    Tailgate Tension

    Did you install it yourself, and did it remedy the problem.
  19. K

    Tailgate Tension

    Not the temp---Gradually been losing tension up and down. It's not slamming down yet, just noticeably weaker than when newer.
  20. K

    Tailgate Tension

    Is there a way to adjust the tension of the tailgate as it opens and closes? Mine is 2021 and loved the way it worked new, but now it comes down much faster and has less assistance going up. Thanks Kenny4
Top