What did you do to your Ram today???

[rockerdan]

Great setup here.

FWIW, I did something similar by going with the Adarac Aluminum Pro Series rack. Works perfect and I can remove it completely. I then cover the stake pockets with flush Bull-ring black chrome popup rings to maintain a clean look. Love both products. Absolutely no conflicts with my Mopar (Bakflip) hard folding cover.

Here are some pics in a post I made on another thread.

Kayak transport

I didn't have an issue hauling my 12' kayak in my 2500 with 8' bed. But with the very short bed, I'm not sure if I should go with a roof rack, or headache rack and hitch rack or tower racks. My wife wants to join me this year so I'm going to get her a kayak, too. So, suggestions would be good...

5thgenrams.com

Just illustrating options.


Sent from my SM-G955U using Tapatalk

I have been eying up the adarac pro for awhile. I love how it attaches and also love that i can run a flip tonneau like BAK, which i want as I want the bakbox2 for small tools. I also load a snowmobile in occasionally(quad cab) so the bak has my interest. Its also my work truck but I dont like to have racks on always. I like that the adarac can be removed easily.

I was thinking about the other rear bar and a single bar on roof, as a cheaper way to go and fast removal, but those certain days i need longer lumber the angled setup wont work as well.

Ive been running weekender racks for many years but they need drilling, and I hate the rust that starts on bottom of bed from below on previous trucks due to the bottom holes drilled. And I need to remove tonneau to use the weekenders.

Having the tonneau and racks all work together is awesome, as you have. I just wish the pro was available in black, I would probably get them powder coated.

Thanks for the pics, looks great!

 

[Ruttin1]

Sorry to see that..I saw someone on here bought a set of 4 OEM flares for around $250. Id bet you can get one for cheap and paint match it. Going aftermarket on all 4 could run 600-1000 to get them paint matched and all. However if you are after more aftermarket look now is the time to do it!

I figured it would be pretty pricey to have it painted. Worth a try.
Don’t have to go for aftermarket look. That’s what the Jeep is for.


Sent from my iPad using Tapatalk

 

[barakutha]

I loved the Plastidip, but decided to debadge. used steam to ease up the adhesive, pried em off, then adhesive remover followed by some clay bar, compound and sealant action

Sent from my iPhone using Tapatalk

 

[shrubs2000]

Not a bad call. I don't notice them what with Ohio's bright plates. Having an all black truck with white plates and blue/red lettering is irritating. Next year we get to take the front plate off as it will be longer be required.

The saga continues....

Front license plate requirement could return to Ohio

State legislators aim to change front plate law in Ohio.

www.fox19.com

 

[rsmeanie]

I loved the Plastidip, but decided to debadge. used steam to ease up the adhesive, pried em off, then adhesive remover followed by some clay bar, compound and sealant action

Sent from my iPhone using Tapatalk

Looks good! I've been debating the debadging myself. I already removed the RAM logo on the sides but have been going back and forth on the tailgate.

 

[sjsleuth]

Will do. A fellow forum member put these on his Big Horn stock 20s with no lift or leveling, and he reports that there’s only a slight rub against the wheel liner material at full lock turns, and he thinks the liner material can be zip locked or pinned back out of the way. His truck looks great with these tires. Here’s a link to one of his his post.

285/60R20 on stock suspension + stock wheels 20x9

I was not totally sure whether these tires would truly fit and function nicely on my stock suspension 19’ Big Horn Black Appearance Package. I read lots of posts on this forum but many seem to include tires of larger size coinciding with a level kit, full suspension lift, Ram Rebel, or air ride...

5thgenrams.com

I read there is a 1 inch lift when you purchase truck with stock 20's.

 

[diamondmi]

Gave her a bath

Sent from my iPhone using Tapatalk

What kind of soap are u using to create such a solid foam. Mine kind of drips off. I’m using McGuyers.


Sent from my iPhone using Tapatalk
Waiting for my newly ordered 2020 Laramie Longhorn, Delmonico Red, chrome bumpers, 20” wheels, 5.7 V8 Hemi MDS VVT eTorque, 3.92 rear, all options except diesel, multifunction tailgate, protection group and trailer tow group. Interior Black/New Saddle. Looking forward to delivery. Truck arrived!!! Yes!

 

[MrAndrewArnold]

What kind of soap are u using to create such a solid foam. Mine kind of drips off. I’m using McGuyers.


Sent from my iPhone using Tapatalk
Waiting for my newly ordered 2020 Laramie Longhorn, Delmonico Red, chrome bumpers, 20” wheels, 5.7 V8 Hemi MDS VVT eTorque, 3.92 rear, all options except diesel, multifunction tailgate, protection group and trailer tow group. Interior Black/New Saddle. Looking forward to delivery. Truck arrived!!! Yes!

That's a foam cannon hook up to hose or pressure washer.

 

[diamondmi]

Had it detailed Friday and parked it in the garage. I need to put the 3/8" wheel spacers and chrome tow hooks on it soon.

Nice. How did you get such a gloss on the paint?


Sent from my iPhone using Tapatalk
Waiting for my newly ordered 2020 Laramie Longhorn, Delmonico Red, chrome bumpers, 20” wheels, 5.7 V8 Hemi MDS VVT eTorque, 3.92 rear, all options except diesel, multifunction tailgate, protection group and trailer tow group. Interior Black/New Saddle. Looking forward to delivery. Truck arrived!!! Yes!

 

[Genxeration]

So today I ordered the S&B CAI, black tow hooks (planning to powder coat them to match my wheels), tow hook bezels, Mopar 2" lift kit and Ihad my muffler deleted. I actually went to the muffler shop to have a Magnaflow welded on but the guy talked me out of it. He said if I wasn't happy with the delete he'd only charge me the cost of the muffler and install it for free. So, I paid $80 to have the muffler cut out and a straight pipe welded in. Sounds awesome! In my opinion it's somewhere between the MagnaFlow and FlowMaster. Next on my list will be Ridge Grapplers 35X12.5r22. After that I think I'll just enjoy the Ram even more.

 

[barakutha]

What kind of soap are u using to create such a solid foam. Mine kind of drips off. I’m using McGuyers.


Sent from my iPhone using Tapatalk
Waiting for my newly ordered 2020 Laramie Longhorn, Delmonico Red, chrome bumpers, 20” wheels, 5.7 V8 Hemi MDS VVT eTorque, 3.92 rear, all options except diesel, multifunction tailgate, protection group and trailer tow group. Interior Black/New Saddle. Looking forward to delivery. Truck arrived!!! Yes!

Foam cannon on an electric pressure washer. Chemical guys soaps


Sent from my iPhone using Tapatalk

 

[Bluelinebuild]

Mopar lift over the weekend and new wheels and tires today.

What size is the lift?, truck sits perfect!

 

[Alxmlr789]

What size is the lift?, truck sits perfect!

2” Mopar lift! Thanks

 

[njech7]

had my muffler deleted. I actually went to the muffler shop to have a Magnaflow welded on but the guy talked me out of it. He said if I wasn't happy with the delete he'd only charge me the cost of the muffler and install it for free. So, I paid $80 to have the muffler cut out and a straight pipe welded in. Sounds awesome!

Any drone?

 

[barakutha]

Looks good! I've been debating the debadging myself. I already removed the RAM logo on the sides but have been going back and forth on the tailgate.

Im keeping my side emblems for now.. next project is plastidip on the window trim

Sent from my iPhone using Tapatalk

 

[Genxeration]

Any drone?

Nope, not at all. I did leave the resonators on though

 

[Genxeration]

Mopar lift over the weekend and new wheels and tires today.

Looks nice! Are those 35s?

 

[Alxmlr789]

Looks nice! Are those 35s?

305/55/20 - 33.3

 

[nlindste]

I loved the Plastidip, but decided to debadge. used steam to ease up the adhesive, pried em off, then adhesive remover followed by some clay bar, compound and sealant action

Sent from my iPhone using Tapatalk

Make sure you check your tailgate with the light on your license plate, mine was rubbing on the tailgate just below the crease.

 

[Mustangmike66]

Got the front windows tinted to match the rear windows.

Sent from my iPhone using Tapatalk