This is my first use. Still working on the pressure setting to keep foam down. First glass was 3/4 foam. Second was only 1/2
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What did you do to your Ram today???
- Thread starter 19BlkRam
- Start date
HemiDude
Spends too much time on here
Yowsa, that's some wasted head
Yeah, especially since it was $32 to fill this thing.Yowsa, that's some wasted head
HemiDude
Spends too much time on here
Still cheaper than a good bottle of whiskey or scotch, if that's any consolation
I had to look it up, thought they were brass knuckles ;-)
TheLegend
Ram Guru
- Joined
- Feb 11, 2023
- Messages
- 504
- Reaction score
- 434
- Points
- 63
- Age
- 32
I installed the Roll-N-Lock E-Series Tennaue Cover and I tell you what the electronic roll up is nice haven’t gotten any water in it been through downpours to car washes no a single drop. Also, have a led bar on the inside housing that lights up the bed at night and it is BRIGHT! Absolutely worth every penny and has a manual override if you ever wanted to open or close it that way.
Attachments
Bpebler
Ram Guru
- Joined
- Jan 7, 2021
- Messages
- 816
- Reaction score
- 445
- Points
- 63
- Age
- 39
so they go one the ends of the doors, just inside the door jamb... so instead of closing my doors by putting my greaseball Italian fingers on the outside of the door and getting hand prints on the paint/possibly scratching it when theres like sand/salt on it, you grab these and swing the door shut. @Waterfowler41 did a vid on them...
Edit: heres the link to his vid.
commentary: my fav part is when he says "they're not for fights"
What a cool idea! Didn’t catch that one on here. Thanks for the share!
Big/Only gripe about my bumper was that were no fog lights. It only took me about a year to make some brackets and install some cheap fog lights I had bought lol these are mainly for looks and really provide no usable output. I also hate the backsplash of light behind the bumper.
It got me thinking tho, and I started researching some. I want to install Diode Dynamic 2" fog lights in the area right below the light bar. There is a nice little step there and I could cut into the mesh above the skid plate and set them nicely into there. Just gotta work up the courage to cut into the bumper
Anyways, pictures!
It got me thinking tho, and I started researching some. I want to install Diode Dynamic 2" fog lights in the area right below the light bar. There is a nice little step there and I could cut into the mesh above the skid plate and set them nicely into there. Just gotta work up the courage to cut into the bumper
Anyways, pictures!
Brunzca
Well-Known Member
Borla-S installed today.. so far, I LOVE it. Perfect amount of growl, without being too much. Pricey, but I think exactly what I wanted
HEMIJAKE
Ram Guru
Here ya go. Better than I thought. Looks like about $115
Side note: If you do get one, you have to have your headlights on to use it as it gets its power signal from the trailer running lights. I didn't know that when I installed it, and I spent several minutes cussing because I couldn't figure out why I had no picture
Bullet2020
Member
Gotta ask what did you fill it with??
Idahoktm
Spends too much time on here
What did you do to your Ram today???
And what flavor did your Ram bring home? It's called Huge Heffner. It's a 7.1% abv wheat beer.
5thgenrams.com
He answered this above...
It's called Huge Heffner. It's a 7.1% abv wheat beer.
31RamIt
Ram Guru
- Joined
- Oct 25, 2021
- Messages
- 1,164
- Reaction score
- 1,134
- Points
- 113
- Age
- 31
I have a creaking noise coming from the front whenever weight shifts forward and back. Rear gives a pop sometimes. Gonna convince my wife I need new CAs
31RamIt
Ram Guru
- Joined
- Oct 25, 2021
- Messages
- 1,164
- Reaction score
- 1,134
- Points
- 113
- Age
- 31
Awesome. I'll have to give it a try!Here ya go. Better than I thought. Looks like about $115
Side note: If you do get one, you have to have your headlights on to use it as it gets its power signal from the trailer running lights. I didn't know that when I installed it, and I spent several minutes cussing because I couldn't figure out why I had no picture
Idahoktm
Spends too much time on here
31RamIt
Ram Guru
- Joined
- Oct 25, 2021
- Messages
- 1,164
- Reaction score
- 1,134
- Points
- 113
- Age
- 31
When it's not a real necessity, yes. She is very loving and open to letting me spend money. However, with the lift, wheels, and tires.... I kinda burned my budget there.Your wife needs to be on board in order for you to get new UCA's?
TheLegend
Ram Guru
- Joined
- Feb 11, 2023
- Messages
- 504
- Reaction score
- 434
- Points
- 63
- Age
- 32
Lol, I’m in the same boat so I’m trying to figure out what all I need as I don’t know enough about lifts and my wife is like but it’s going to take away from the “Luxury and sleek look you have” I showed her some pictures of lifts and tires that aren’t super wide and high and now she’s all about getting it done but I spent a lot of money on goodies already (mostly because of this forum)
31RamIt
Ram Guru
- Joined
- Oct 25, 2021
- Messages
- 1,164
- Reaction score
- 1,134
- Points
- 113
- Age
- 31
I originally reverse levelled my truck because it had the 22" Night Edition wheels. My wife hated it. Now it's just lifted 2" with 35s and she loves it. So, it was worth the money. I'm just in money jail for a bit.Lol, I’m in the same boat so I’m trying to figure out what all I need as I don’t know enough about lifts and my wife is like but it’s going to take away from the “Luxury and sleek look you have” I showed her some pictures of lifts and tires that aren’t super wide and high and now she’s all about getting it done but I spent a lot of money on goodies already (mostly because of this forum)
TheLegend
Ram Guru
- Joined
- Feb 11, 2023
- Messages
- 504
- Reaction score
- 434
- Points
- 63
- Age
- 32
So, I have the stock 20”x9 premium painted wheels w/ inserts with the OEM 20” tires. I want to do a 2” lift and I want to do it the right way the first time what do you recommend? I do very mild off roading (nothing serious) but I do pull a trailer from time to time and some hot shot stuff I’ll take in the bed that can be pretty heavy at times. I know our trucks have a rake standard so front and rear with new UCA’s and a sway bar or just front? I know on lift kits it’s one of those perspective questions but just curious what different people have done and recommend. As, I said I’ve done research but never have done them and don’t know that world very well to know what’s good quality product. Looking to do it in about a month.
