5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

Decided (last night) to install the window visors (EGR) and the stone/bug deflector (Weathertech). The window deflectors were a breeze and only took about 20 minutes to install. The bug deflector was a PITA. After popping out the rivets in the seal/hood, you align the deflector under the gasket and "try" to screw in new push pins with a screw. I would like to see those that actually got the screw to tighten....lol

View attachment 116347View attachment 116348
I got the deflector screws "snug"/flush which is all that's needed to secure it in the fastener. Been good ever since. Been thinking about getting some rain guards lately... 🤔
 
Added Katskins leather heated cooled seats to my 2020 BigHorn what a difference this makes put these in a couple months ago. Awesome add-on. Had autoaction do the work out of central jersey $3100 out the door.
 

Attachments

  • 44B948E6-5307-4536-9FA5-664BD316536A.jpeg
    44B948E6-5307-4536-9FA5-664BD316536A.jpeg
    145.7 KB · Views: 204
  • A18E3457-CC71-4CA7-A048-289EBD043BDE.jpeg
    A18E3457-CC71-4CA7-A048-289EBD043BDE.jpeg
    157.7 KB · Views: 199
  • 40A85D1C-3AB8-4FD2-A97E-6379208C99AC.jpeg
    40A85D1C-3AB8-4FD2-A97E-6379208C99AC.jpeg
    93 KB · Views: 198
  • 6476C0BF-A9C9-40C5-9DAC-11104740B4A3.jpeg
    6476C0BF-A9C9-40C5-9DAC-11104740B4A3.jpeg
    153.2 KB · Views: 197
  • D1EABC96-2D56-4A6B-83F0-A73055EBB328.jpeg
    D1EABC96-2D56-4A6B-83F0-A73055EBB328.jpeg
    168.1 KB · Views: 197
  • C75C8EDD-F7D6-4033-8683-75580FDE1F99.jpeg
    C75C8EDD-F7D6-4033-8683-75580FDE1F99.jpeg
    148 KB · Views: 191
  • A7DE6184-7572-4760-8536-E51FEDBAB877.jpeg
    A7DE6184-7572-4760-8536-E51FEDBAB877.jpeg
    251.8 KB · Views: 196
  • 9D3C518E-CD8D-4ACC-A4B9-255D859B1987.jpeg
    9D3C518E-CD8D-4ACC-A4B9-255D859B1987.jpeg
    153.4 KB · Views: 191
  • A307617F-9758-478E-92A7-F5490E19502D.jpeg
    A307617F-9758-478E-92A7-F5490E19502D.jpeg
    127.8 KB · Views: 206
Decided (last night) to install the window visors (EGR) and the stone/bug deflector (Weathertech). The window deflectors were a breeze and only took about 20 minutes to install. The bug deflector was a PITA. After popping out the rivets in the seal/hood, you align the deflector under the gasket and "try" to screw in new push pins with a screw. I would like to see those that actually got the screw to tighten....lol

View attachment 116347View attachment 116348
I had a hell of a time with mine. I'm pretty sure mine was warped and the brackets didn't sit correctly for me to tighten those plastic rivets enough. I ended up taking mine off and installing the MOPAR deflector. I know 99% of the members like the weathertech bug deflector but it just wasn't working out for me.
 
Added Katskins leather heated cooled seats to my 2020 BigHorn what a difference this makes put these in a couple months ago. Awesome add-on. Had autoaction do the work out of central jersey $3100 out the door.
Very nice! I installed Katzkin on my previous Chevy Colorado and got a lot of complements. The shop you used did a good job with the switch placements.
 
Decided (last night) to install the window visors (EGR) and the stone/bug deflector (Weathertech). The window deflectors were a breeze and only took about 20 minutes to install. The bug deflector was a PITA. After popping out the rivets in the seal/hood, you align the deflector under the gasket and "try" to screw in new push pins with a screw. I would like to see those that actually got the screw to tighten....lol

View attachment 116347View attachment 116348
If they are the plastic push in pins I am thinking of, the center piece with the Phillips head on it doesn't get "tight". Once it's flush, that's all that is needed. At that point it's done what it's supposed to by spreading out the back as far as it can
 
What are those little light/leds in your rear bumper and how hard was it to wire in and mount all the lights? I definitely would like more light when backing up
Lookup reverse lights on here, a bunch of info there, I used the Curt adapter, wiring is pretty straightforward and relatively easy., the difficult part is removing that piece and cutting it for the lights, I have some pics in this thread on the install a few pages (or more) back.
 
Had the roof wrapped in gloss black. Loving the extra contrast. My customization style typically leans toward subtle so this was right up my alley for a first modification.
 

Attachments

  • 5MG_9031.jpg
    5MG_9031.jpg
    86 KB · Views: 206
  • 5MG_9063.jpg
    5MG_9063.jpg
    84.9 KB · Views: 202
  • 5MG_9078.jpg
    5MG_9078.jpg
    110.3 KB · Views: 200
  • IMG_4925.JPG
    IMG_4925.JPG
    130.7 KB · Views: 204

Users who are viewing this thread

Back
Top