What's new
By:
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

LoNeStAr said:
Put on N-FAB Epyx steps. Love the look!
Click to expand...
I love my epyx steps, but I'm not thrilled with the powder coat. I've had them on since May / June, and the finish is starting to chip or sandblast away on the front facing flat parts of the steps. Only half way through one winter. I hate the salt and sand on the roads here, it drives me insane.
 
HEMIJAKE said:
I love my epyx steps, but I'm not thrilled with the powder coat. I've had them on since May / June, and the finish is starting to chip or sandblast away on the front facing flat parts of the steps. Only half way through one winter. I hate the salt and sand on the roads here, it drives me insane.
Click to expand...
Luckily for me I see little to no snow being in Texas. I thought about having mine LineX coated and still may at some point.
 
HEMIJAKE said:
I love my epyx steps, but I'm not thrilled with the powder coat. I've had them on since May / June, and the finish is starting to chip or sandblast away on the front facing flat parts of the steps. Only half way through one winter. I hate the salt and sand on the roads here, it drives me insane.
Click to expand...
I was thinking the same thing when I had mine. I was planning on getting either line-x or cerakote on them.
 
djevox said:
Got my new truck back from the detailer. They did a phenomenal job on the ceramic coat. They are so honest that they showed me a hazy spot on my fuel rims that they weren’t happy with, so they’re keeping the wheels to strip and coat them with a different ceramic coat. They had to get some kind of IR light to make it show- it couldn’t be seen with the naked eye. These guys will be my detailer for as long as they stay in business and provide this level of work.

@MurphBigHorn If you need a detailer, check out Annapolis performance coatings. I have no affiliation with them and don’t get money from sending them business, but they are great.

View attachment 115950
View attachment 115951
View attachment 115952
Click to expand...

Truck looks so good! I’ll check it out.
 
djevox said:
Got my new truck back from the detailer. They did a phenomenal job on the ceramic coat. They are so honest that they showed me a hazy spot on my fuel rims that they weren’t happy with, so they’re keeping the wheels to strip and coat them with a different ceramic coat. They had to get some kind of IR light to make it show- it couldn’t be seen with the naked eye. These guys will be my detailer for as long as they stay in business and provide this level of work.

@MurphBigHorn If you need a detailer, check out Annapolis performance coatings. I have no affiliation with them and don’t get money from sending them business, but they are great.

View attachment 115950
View attachment 115951
View attachment 115952
Click to expand...
Wow, Shiney😎
 
Dookie said:
It is nice, but actually not mine, it was placed there by my boss who is out of New Orleans pre-hurricane Ida, he evacuated N.O. and lived in it after the storm until power was restored down there in a few weeks. Baton Rouge was far less severely hit by Ida than farther south. I lost power at home for about 3 days but was under generator power, and at work, was about the same time frame. Hurricanes SUCK A$$, hope we don't see another in my lifetime, but I'm only 50, so probably will.
Click to expand...
Ida is the reason I got a ram.
 
Dookie said:
That b!tch messed up my favorite fishing areas pretty bad, Point-Aux-Chenes, and of course Grand Isle, La.

Finally got a decent pic of my turn signal DRL's I think I'll keep it like this, definitely stand out in the crowd.

View attachment 115964
Click to expand...
Looks great against the black.

What settings did you change in the BCM to turn off the white brows and activate the amber turn signals as DRLs?
 
The accent lighting is still enabled in the pic, just hard to see with the angle of the sunlight, plus my headlights are tinted/Lamin-X'd but the signature lights always made it difficult for me to get a decent pic to show how it looked IRL, but if you want to turn the signature lights off, here is how.
CBC Extern Light Calibr: Signature Light Present: No

To change the DRL's to turn signal:
CBC Features: DRL Lamp Location: Turn Signal
Remember, you have to enable DRL's in the first place in your settings.
 
Last edited:
Just got more goodies ordered for my RAM. As stated earlier, I have already ordered the Motofab 3" front/2" rear leveling kit, 20" wheels, and Yokohama Geolandar A/T G015's in 295/65r20. Hopefully all of that will arrive, and be installed, by the end of the week.

Now I have also ordered a Hellwig 7883 sway bar and end link kit, and a JMS PedalMAX Terrain. I hope to also have these installed by the end of the week. I really need to stop spending money on this truck, but there are still some things I wand to do. :D
 
I did a thing today. Took about 8 weeks to come in. I was able to keep all of the parts I had added from my old truck, so I'll be adding them to the new one soon.

2022 Limited Night Edition

IMG_5148.JPG
 
Installed the gas filler dust cap from Geno's Garage, fit is perfect!
 
Last edited:
You must log in or register to reply here.

Users who are viewing this thread

Total: 4 (members: 1, guests: 3)

Site Vendors

https://www.jasonlewisautomotive.com/

Members online

Total: 446 (members: 46, guests: 400)
Back
Top