5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

HEMIJAKE

Ram Guru
Joined
May 13, 2021
Messages
528
Reaction score
952
Location
Potter County, Pa
Put on N-FAB Epyx steps. Love the look!
I love my epyx steps, but I'm not thrilled with the powder coat. I've had them on since May / June, and the finish is starting to chip or sandblast away on the front facing flat parts of the steps. Only half way through one winter. I hate the salt and sand on the roads here, it drives me insane.
 

LoNeStAr

Ram Guru
Joined
Jan 29, 2020
Messages
686
Reaction score
514
I love my epyx steps, but I'm not thrilled with the powder coat. I've had them on since May / June, and the finish is starting to chip or sandblast away on the front facing flat parts of the steps. Only half way through one winter. I hate the salt and sand on the roads here, it drives me insane.
Luckily for me I see little to no snow being in Texas. I thought about having mine LineX coated and still may at some point.
 

djevox

VP of Creative Thinking
Staff member
Site Supporter
Joined
Aug 27, 2021
Messages
4,209
Reaction score
4,577
Location
MD
I love my epyx steps, but I'm not thrilled with the powder coat. I've had them on since May / June, and the finish is starting to chip or sandblast away on the front facing flat parts of the steps. Only half way through one winter. I hate the salt and sand on the roads here, it drives me insane.
I was thinking the same thing when I had mine. I was planning on getting either line-x or cerakote on them.
 

MurphBigHorn

Ram Guru
Joined
Jun 25, 2021
Messages
569
Reaction score
586
Got my new truck back from the detailer. They did a phenomenal job on the ceramic coat. They are so honest that they showed me a hazy spot on my fuel rims that they weren’t happy with, so they’re keeping the wheels to strip and coat them with a different ceramic coat. They had to get some kind of IR light to make it show- it couldn’t be seen with the naked eye. These guys will be my detailer for as long as they stay in business and provide this level of work.

@MurphBigHorn If you need a detailer, check out Annapolis performance coatings. I have no affiliation with them and don’t get money from sending them business, but they are great.

View attachment 115950
View attachment 115951
View attachment 115952

Truck looks so good! I’ll check it out.
 

Ram4Lou

Active Member
Joined
Aug 6, 2019
Messages
111
Reaction score
110
Got my new truck back from the detailer. They did a phenomenal job on the ceramic coat. They are so honest that they showed me a hazy spot on my fuel rims that they weren’t happy with, so they’re keeping the wheels to strip and coat them with a different ceramic coat. They had to get some kind of IR light to make it show- it couldn’t be seen with the naked eye. These guys will be my detailer for as long as they stay in business and provide this level of work.

@MurphBigHorn If you need a detailer, check out Annapolis performance coatings. I have no affiliation with them and don’t get money from sending them business, but they are great.

View attachment 115950
View attachment 115951
View attachment 115952
Wow, Shiney😎
 

Cajun_

Well-Known Member
Joined
Sep 20, 2021
Messages
295
Reaction score
321
Location
Louisiana
It is nice, but actually not mine, it was placed there by my boss who is out of New Orleans pre-hurricane Ida, he evacuated N.O. and lived in it after the storm until power was restored down there in a few weeks. Baton Rouge was far less severely hit by Ida than farther south. I lost power at home for about 3 days but was under generator power, and at work, was about the same time frame. Hurricanes SUCK A$$, hope we don't see another in my lifetime, but I'm only 50, so probably will.
Ida is the reason I got a ram.
 

brian42

Ram Guru
Joined
Apr 1, 2019
Messages
1,708
Reaction score
1,334
Location
San Diego, CA
That b!tch messed up my favorite fishing areas pretty bad, Point-Aux-Chenes, and of course Grand Isle, La.

Finally got a decent pic of my turn signal DRL's I think I'll keep it like this, definitely stand out in the crowd.

View attachment 115964
Looks great against the black.

What settings did you change in the BCM to turn off the white brows and activate the amber turn signals as DRLs?
 

Dookie

Ram Guru
Joined
Dec 26, 2019
Messages
907
Reaction score
1,189
Location
Prairieville, La.
The accent lighting is still enabled in the pic, just hard to see with the angle of the sunlight, plus my headlights are tinted/Lamin-X'd but the signature lights always made it difficult for me to get a decent pic to show how it looked IRL, but if you want to turn the signature lights off, here is how.
CBC Extern Light Calibr: Signature Light Present: No

To change the DRL's to turn signal:
CBC Features: DRL Lamp Location: Turn Signal
Remember, you have to enable DRL's in the first place in your settings.
 
Last edited:

Lpsouth1978

Well-Known Member
Joined
Nov 30, 2021
Messages
352
Reaction score
405
Just got more goodies ordered for my RAM. As stated earlier, I have already ordered the Motofab 3" front/2" rear leveling kit, 20" wheels, and Yokohama Geolandar A/T G015's in 295/65r20. Hopefully all of that will arrive, and be installed, by the end of the week.

Now I have also ordered a Hellwig 7883 sway bar and end link kit, and a JMS PedalMAX Terrain. I hope to also have these installed by the end of the week. I really need to stop spending money on this truck, but there are still some things I wand to do. :D
 

2020GCM

Active Member
Joined
Oct 16, 2019
Messages
90
Reaction score
96
Installed the gas filler dust cap from Geno's Garage, fit is perfect!
 
Last edited:

Users who are viewing this thread

Top