This is Bilstien 5100s set at clip 6 with stock ORP springs and a 1" rear spacers with 35x12.50x20 tires on stock wheels. I moved my Bilstiens up to clip 6 to compensate for added droop caused by heavier front bumper. This was right after the adjustment. The front did settle about 1/2" after driving some
This was before adjusting the front Bilstiens for the heavier bumper. There was abiut 1.25" rake
And this was before the bumper with Bilstien set to clip 5 on 275/65/29 tires
Another thing to notez I am running the Zone Off Road UCAs. When I installed them, they gave me another 1/2" lift in the front on top of the Bilstien 5100's. Which is why I installed the 1" rear spacer, to prevent the perfectly level nose high appearance. 1/2" or 3/4" rear spacer probably would have been suffiy, but I couldn't find any at the time