Mopar exhaust vs corsa sport

[Bwsteg]

Decided to pick up the resonator delete to go with the Corsa. And finally got around to putting the cold start video together comparing the Carven Cut & Clamp, Corsa Sport, and Corsa Sport with Resonator Delete.

I’m surprised your 2020 had a resonator

 

[Kenny4]

Mopar black exhaust tips installed. Look and sound great!

View attachment 66102View attachment 66103View attachment 66104

In the first picture your 2019 shows a big fat resonator at the end just before the tip. Is that the same on most of the 5.7's mentioned in this thread? I ask because I have a 2021 and it has the same as the 1st pic and not like the ones with the small oval shaped ones in the pipe. This thread has stayed on topic with comments on Corsa, Mopar & Borla so I don't want to ruin the thread with questions about other set ups. Is there another well visited thread with discussions of all types of after market and the drone effect. Thanks

 

[NewTruckWhoDis]

I feel l need to update my assessment given that I have a few more miles on the Corsa and since I have had to deal with their customer service.

First, since the reso delete install, and after a few additional break-in miles, the exhaust has really come alive. It is a lot closer to where I thought it should be. Cold starts sound fantastic. I can hear it while "giving it the beans". Cruising is still a comfortable no-drone zone. Credit to FCA on that part, they did a great job sound deadening the interior (IMO). One of these days I will trade out these Atturos for some Ridge Grapplers and reduce tire noise as well.

Second, and arguably more important, Corsa's customer service has been extra stellar. They have a lifelong customer for sure. My exhaust arrived with a small ding due to shipping and they were ready and willing to warranty replace it on the spot. I didn't end up going that route, so they hooked it up with a discount on the next part I bought. Had some issues with the powder coating on the black tips chipping from the inside, and they are warranty replacing those with a better (more $$) version at no extra cost. Matt has been awesome and super responsive. Couldn't have asked for a better experience or product.

 

[Bwsteg]

I feel l need to update my assessment given that I have a few more miles on the Corsa and since I have had to deal with their customer service.

First, since the reso delete install, and after a few additional break-in miles, the exhaust has really come alive. It is a lot closer to where I thought it should be. Cold starts sound fantastic. I can hear it while "giving it the beans". Cruising is still a comfortable no-drone zone. Credit to FCA on that part, they did a great job sound deadening the interior (IMO). One of these days I will trade out these Atturos for some Ridge Grapplers and reduce tire noise as well.

Second, and arguably more important, Corsa's customer service has been extra stellar. They have a lifelong customer for sure. My exhaust arrived with a small ding due to shipping and they were ready and willing to warranty replace it on the spot. I didn't end up going that route, so they hooked it up with a discount on the next part I bought. Had some issues with the powder coating on the black tips chipping from the inside, and they are warranty replacing those with a better (more $$) version at no extra cost. Matt has been awesome and super responsive. Couldn't have asked for a better experience or product.

Interesting. Any info on these supposed better tips?

 

[NewTruckWhoDis]

Oh yeah, I ordered my exhaust with the black powder coated tips. They offered me the gunmetal, non powder coated tips (part number 21046GNM) as replacement.

Sent from my SM-N950U using Tapatalk

 

[Ksiegel9]

I would say that it is not overly loud. At idle and normal driving there is a nice deep tone but not loud. When you step on the gas is when they really sing!

I could try to make another video if there is one in particular that you would like to see/hear.

Can we hear a video of start to drive by? Or anything? Also what did you put In/take out? Names please

 

[CRedemann64]

Mopar is made by Borla and ii is View attachment 66664s type. Borla S type was too lound for me installed a small resonator next to stock resonator. Nice v8 exhaust notes minus drone and crackle under heavy foot.

Good morning! I also have the S type Borla on my 2020 I’m looking to install a resonator too but what is the pipe’s diameter? Thanks for any help!

 

[securityguy]

I believe it is 3" but I'll let others chime in to confirm.

 

[Venom700]

Good morning! I also have the S type Borla on my 2020 I’m looking to install a resonator too but what is the pipe’s diameter? Thanks for any help!

It is 3”. Part 60667. Amazon has it for $208 which if you get the 5% off, is the cheapest there is.

 

[CRedemann64]

It is 3”. Part 60667. Amazon has it for $208 which if you get the 5% off, is the cheapest there is.

Thanks! Is the pipe Stainless??

 

[CRedemann64]

Does anyone have experience with the ZZ Performance resonators? If so what are your thoughts??

 

[securityguy]

Thanks! Is the pipe Stainless??

Yes it is

 

[Detroitmikeb]

I know this is old as dirt but is anyone here willing to sell me their stock midpipe WITH resonator?

 

[6of36]

I know this is old as dirt but is anyone here willing to sell me their stock midpipe WITH resonator?

Check Craigslist. I've seen people selling their entire factory exhaust multiple times. In Detroit area.