Key fob programming

[Infinitech]

Well, I have tried with 4 different scan tools, with Auto Auth and with a Security gateway bypass cable, Jscan and AlfaOBD. I have a new factory key that I purchased at the dealer. They gave me a 4 digit pin at the time I purchased it. Jscan and Alfaobd are both able to extract a 5 digit pin from the truck. I purchased a OBD LinkMX+ for Jscan and AlfaOBD use. Jscan is on my Ipad. AlfaOBD is on my windows laptop. I no longer have an Android phone or tablet anymore so I can't try that combo.
So long story short, I have been unsuccessful at adding a Key to my truck. (bought it a couple months ago with one key). Tomorrow, I'm getting it programmed by a key vendor. On both Alfa and Jscan, they will get me to the step that says to touch the key to the start button and they both have the error: Fobik is not Blank.
My truck is a 2022 Ram Limited with 6 button key fob. Lock, Unlock, Remote start, Panic, Tailgate and Air suspension buttons. Even though I haven't succeeded at programming, I am open to suggestions and would like to hear how anyone else succeeded.

 

[skyhawk42]

Ma

Well, I have tried with 4 different scan tools, with Auto Auth and with a Security gateway bypass cable, Jscan and AlfaOBD. I have a new factory key that I purchased at the dealer. They gave me a 4 digit pin at the time I purchased it. Jscan and Alfaobd are both able to extract a 5 digit pin from the truck. I purchased a OBD LinkMX+ for Jscan and AlfaOBD use. Jscan is on my Ipad. AlfaOBD is on my windows laptop. I no longer have an Android phone or tablet anymore so I can't try that combo.
So long story short, I have been unsuccessful at adding a Key to my truck. (bought it a couple months ago with one key). Tomorrow, I'm getting it programmed by a key vendor. On both Alfa and Jscan, they will get me to the step that says to touch the key to the start button and they both have the error: Fobik is not Blank.
My truck is a 2022 Ram Limited with 6 button key fob. Lock, Unlock, Remote start, Panic, Tailgate and Air suspension buttons. Even though I haven't succeeded at programming, I am open to suggestions and would like to hear how anyone else succeeded.

ke sure the working fob is not near the truck when trying to program the new fob, otherwise it may read the old fob and tell you it’s not blank

 

[Infinitech]

Ma

ke sure the working fob is not near the truck when trying to program the new fob, otherwise it may read the old fob and tell you it’s not blank

I did try that. Had the key FOB far away from the vehicle. Also, my key vendor was unable to program it. I have an appt at the dealer tomorrow.

 

[Infinitech]

Update. Picked it up from the dealer. They said the new key was bad and they replaced it and programmed it. So maybe I could have programmed it. Maybe I’ll order a cheap one and try it out. I have 2 working keys and don’t want to risk trying to erase them and start over.