HOW TO: Add 360 Surround View Camera System

[Abhi.K]

Ok... Could really use some help... installed my 360 camera system today in my ram. For reference: 2019 1500 Laramie Longhorn with Uconnect 5 12" screen upgrade. I added all the cameras, ran all the wires, installed the cvpm, did the stuff in alfaobd. The soft keys show up (at least some of them: right camera, left camera, rear camera, surround camera... No front?)...BUT I'm getting a blue screen with "Camera system unavailable" on my screen. Can anyone help me out on this? I have the wiring harness from Jimm07 and I'm fairly certain it's plugged in where it's supposed to be (fuse box in F26 with 15 amp fuse) and the can bus connector in a random spot on driver side kick panel.
Thanks for any help in advance!

Its either a power issue or cvpm is not connected to uconnect 5 properly. Thats the only time i have seen blue screen recheck all the connections and make sure the fakra connections didn’t get mixed up. I don’t have front camera softkey as well. It seems like most people don’t. It is however selectable in the 360 mode.