HOW TO: Add 360 Surround View Camera System

[neonguyRT]

FYI for the Jimmy Harness

The connector plugs and not the CVPM.
The ground ring goes to the ground bolt near the CVPM.
The rest of the harness routes over to the driver side.
The fuse tap goes into F26, and the fuse that was originally in F26 goes into the open slot on the fuse tap.
The green connector plugs into any open spot on the canbus junction block behind the headlight switch.

@vincentw56 can you update the original thread with this? and add this video?

 

[Abhi.K]

Thank you [mention]vincentw56 [/mention] and [mention]Jimmy07 [/mention] for the detailed write up and wiring. Finally got everything to work and the magical number to get front camera calibration was 2-3mph. I do see a softkey for all the cameras at bottom half of my screen except front camera. Is it normal or am i missing something to enable the front camera softkey? I can select it in the surround view at top half of screen but just wondering…