5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Aftermarket Amp and 12” sub install in a HK LIMITED!

Bacoviah

Active Member
Joined
Jun 10, 2018
Messages
83
Reaction score
68

wildh24

Ram Guru
Joined
Dec 23, 2018
Messages
558
Reaction score
300
I have the 10W1s and they also play just fine for my tastes. But definitely pay a premium that shallow tech.
 

Hockeygod1225

Active Member
Joined
May 1, 2019
Messages
126
Reaction score
75
Haven't seen this asked yet but how does etorque effect adding on an aftermarket amplifier? The etorque models don't use an alternator so how many amps can the electrical system support? I was dead set on 2 10w6v3 subs until I thought about what the system could actually support.
 

wildh24

Ram Guru
Joined
Dec 23, 2018
Messages
558
Reaction score
300
I'm just posting this on here in case people are trying to get ideas or see if something works.

I built this over the weekend. The goal was to for 2 10" subs under the back seat an make it fit within the factory storage system. This was so I could retain access to bins and not modify the all weather mats. The only subs I could find to make this work are the JL 10TW1. This box has a volume of about 0.69cf +/-. It's stuffed with poly. The amp is a Pioneer GM D8701 (400w/ch at 1ohm).

It's works great. Only thing I'd say it lacks is the real low end stuff (<30hz). It doesn't quite rumble like a 12+ set up would or a set up with more space. But nonetheless it fits my needs and goals and really brings this HK system alive.
 

Attachments

  • 20190511_110120.jpg
    20190511_110120.jpg
    135.3 KB · Views: 182
  • 20190511_111231.jpg
    20190511_111231.jpg
    169.1 KB · Views: 182
  • 20190510_171341.jpg
    20190510_171341.jpg
    251.5 KB · Views: 172

wildh24

Ram Guru
Joined
Dec 23, 2018
Messages
558
Reaction score
300
Haven't seen this asked yet but how does etorque effect adding on an aftermarket amplifier? The etorque models don't use an alternator so how many amps can the electrical system support? I was dead set on 2 10w6v3 subs until I thought about what the system could actually support.

That's a good thought and I don't have any idea. I thought I read somewhere though that the etorque system actually had greater capacity than the standard alternator system.
 

YoAdrian

Moderator
Staff member
Site Supporter
Joined
Jun 20, 2018
Messages
1,058
Reaction score
970
Location
RI, USA.
OK I ordered the ported dual 10" sub box from fox acoustics. Also ordered 2 jl 10w6 subs, a hertz Mille ml 1 amp and the pac interface module.
Will be a great system no doubt, look forward to hearing your review if you have time.
 

Hockeygod1225

Active Member
Joined
May 1, 2019
Messages
126
Reaction score
75
For those interested in the fox boxes. The new dual 10" box seems really well built. I will know more once my subs are installed. Pictures attached. Also the amp kit that I purchased through Amazon is by far the best kit I have ever used. 100% copper wire and the rca's are phenomenal.
 

Attachments

  • 20190516_141718.jpg
    20190516_141718.jpg
    149.5 KB · Views: 174
  • 20190516_141712.jpg
    20190516_141712.jpg
    116.7 KB · Views: 175
  • 20190516_141813.jpg
    20190516_141813.jpg
    177.8 KB · Views: 173
  • 20190516_141806.jpg
    20190516_141806.jpg
    134.5 KB · Views: 173
  • 20190516_142033.jpg
    20190516_142033.jpg
    154.3 KB · Views: 168
  • 20190516_141956.jpg
    20190516_141956.jpg
    137.3 KB · Views: 170
  • 20190516_142135.jpg
    20190516_142135.jpg
    174.3 KB · Views: 166
  • 20190516_142043.jpg
    20190516_142043.jpg
    140.3 KB · Views: 173
  • 20190516_141700.jpg
    20190516_141700.jpg
    132 KB · Views: 175

Hackmunch

Well-Known Member
Joined
Oct 6, 2018
Messages
311
Reaction score
190
box looks nice. my only concern would be sub hitting floor under extreme excursion conditions
 

GOATinstructor

Active Member
Joined
Mar 18, 2019
Messages
55
Reaction score
43
Looks good! Did it not come with terminal cups? How's it look in the truck? Any clearance issues with seat and recline mechanism?

I'm excited and getting ready to pull the trigger myself.

Thank you for posting!
 

Hockeygod1225

Active Member
Joined
May 1, 2019
Messages
126
Reaction score
75
Looks good! Did it not come with terminal cups? How's it look in the truck? Any clearance issues with seat and recline mechanism?

I'm excited and getting ready to pull the trigger myself.

Thank you for posting!
I will test fit it tomorrow and get back to you on fitment. It came with both speaker cups as well. They have revised it already so that the design is relatively the same but includes cutouts to be able to still access the floor boxes without having to slide the box over.
 

Hockeygod1225

Active Member
Joined
May 1, 2019
Messages
126
Reaction score
75
box looks nice. my only concern would be sub hitting floor under extreme excursion conditions
I thought about this as well. I am going to measure first before using my subs and add spacers to both the box and seat height to lift it up if needed. I will keep you updated.
 

Ellisstrong

Spends too much time on here
Joined
Sep 18, 2018
Messages
2,082
Reaction score
1,169
Location
Atlanta Ga area
For those interested in the fox boxes. The new dual 10" box seems really well built. I will know more once my subs are installed. Pictures attached. Also the amp kit that I purchased through Amazon is by far the best kit I have ever used. 100% copper wire and the rca's are phenomenal.
That box definitely looks good. I am also interested in the fit and whether it interferes with anything seat and storage wise.
 

Whiskey_tango

Active Member
Joined
Jan 6, 2019
Messages
152
Reaction score
59
For those interested in the fox boxes. The new dual 10" box seems really well built. I will know more once my subs are installed. Pictures attached. Also the amp kit that I purchased through Amazon is by far the best kit I have ever used. 100% copper wire and the rca's are phenomenal.
That box appears to be flat across the bottom. Does it sit forward of the hump?
 

Hockeygod1225

Active Member
Joined
May 1, 2019
Messages
126
Reaction score
75
That box appears to be flat across the bottom. Does it sit forward of the hump?
I haven't had time to install it yet but cN get it in for a test fit tomorrow. Here are some pics from the manufacturers site.
 

Attachments

  • DCC-210-V-19-2T.jpg
    DCC-210-V-19-2T.jpg
    38.7 KB · Views: 139
  • DCC-210-V-19-3T.jpg
    DCC-210-V-19-3T.jpg
    35.7 KB · Views: 137

Users who are viewing this thread

Top