5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

2025 Ram 1500 Current Owners - Discussion, Feedback, and Problems

UNSAFE

Active Member
Joined
Dec 30, 2023
Messages
30
Reaction score
13
Location
Yorktown, VA
I know someone who bought a 2025 big horn. In fact, he's the only person I know outside of this forum who's purchased a 2025. At 2,000 miles, he's had the following issues:

-After the truck sits for 2 days, the engine would knock until it heated up. He took it to the dealer and the oil looked cloudy and green. He also noticed that, prior to taking it in, the oil gauge was in the red part of MAX. After an oil/filter change, the oil pressure is approx 25-26 and the gauge is reading 3/4 to MAX. It's still doing the knock after sitting for 2 days.

-The locks intermittently do not engage/disengage (sometimes both, sometimes just one), the navigation screen intermittently blacks. Sometimes it's the top half, other times it's the bottom half. Technician said the Body Control Module (?) had a bunch of errors and likely needs to be replaced.
o_O
 

KevInSD

Member
Joined
Nov 11, 2021
Messages
24
Reaction score
43
Location
South Dakota
I reached out to my local RAM dealership and the earliest they can get me in is Monday. Unfortunately the dealer I bought from is over an hour away but if they can get me in sooner I may have to bite the bullet and go there. I might try going to a parts store to see if they can get it on their scanner but not sure if their Software will be updated.

It seems like everything is running fine though and I wouldn't even think anything is wrong with it. Hopefully that continues.
 

KevInSD

Member
Joined
Nov 11, 2021
Messages
24
Reaction score
43
Location
South Dakota
Well, on my way home tonight the CEL magically disappeared. It will be interesting to see how long that lasts. I'm going to keep my Monday appointment for now in case it happens again.
 

a3vr

Member
Joined
Jun 12, 2024
Messages
17
Reaction score
21
Well, on my way home tonight the CEL magically disappeared. It will be interesting to see how long that lasts. I'm going to keep my Monday appointment for now in case it happens again.
As much as it sucks going to the dealer its worth getting the issue documented and them reading the codes. But I’m not sure I would be willing to leave the truck with them.
 

KevInSD

Member
Joined
Nov 11, 2021
Messages
24
Reaction score
43
Location
South Dakota
What was the code? Did you scan it before the CEL disappeared?
I went to O'Reillys and tried using their scanner but the truck is too new and it couldn't read it so I then took it to the mechanic that does some work for me and his scanner couldn't read it either.

As a last ditch effort I took it to the RAM dealer in town, the one I have the Monday appointment with, asking them if they could just do the scan really quick to get the code and they wouldn't. They said since it is a steady orange light instead of the flashing red it wasn't urgent and it would need to wait until Monday. I really dislike this dealer and wish I didn't have to deal with them but I'm stuck unfortunately.

The dealer I bought the truck from said they would get me in to check it but they are over an hour away. That dealership absolutely rocks.
 

Serpens

Active Member
Joined
Dec 20, 2023
Messages
42
Reaction score
30
I reached out to my local RAM dealership and the earliest they can get me in is Monday. Unfortunately the dealer I bought from is over an hour away but if they can get me in sooner I may have to bite the bullet and go there. I might try going to a parts store to see if they can get it on their scanner but not sure if their Software will be updated.

It seems like everything is running fine though and I wouldn't even think anything is wrong with it. Hopefully that continues.

I'm more than willing to bet the car detected a misfire. They're going to need to give you a software update, but last I heard it's not been rolled out yet.
 

FLiPMaRC

Ram Guru
Joined
Jun 13, 2021
Messages
736
Reaction score
708
Location
NJ
I went to O'Reillys and tried using their scanner but the truck is too new and it couldn't read it so I then took it to the mechanic that does some work for me and his scanner couldn't read it either.

As a last ditch effort I took it to the RAM dealer in town, the one I have the Monday appointment with, asking them if they could just do the scan really quick to get the code and they wouldn't. They said since it is a steady orange light instead of the flashing red it wasn't urgent and it would need to wait until Monday. I really dislike this dealer and wish I didn't have to deal with them but I'm stuck unfortunately.

The dealer I bought the truck from said they would get me in to check it but they are over an hour away. That dealership absolutely rocks.
I feel you on the dealership. I bought my truck from a dealer about 1 hour away. But I've been doing my maintenance service at a dealer 5 mins away. I just got an email a few days ago that the dealer near me is closing down. :cry:
 

TroyJonesSF

Active Member
Joined
Jun 11, 2024
Messages
46
Reaction score
16
I feel you on the dealership. I bought my truck from a dealer about 1 hour away. But I've been doing my maintenance service at a dealer 5 mins away. I just got an email a few days ago that the dealer near me is closing down. :cry:
Probably the consequence of not getting local support. Now, you get the privilege of driving to the dealer you supported.
 

Users who are viewing this thread

Top