Thanks Daverous. I am going to get everything ordered and will report back once its installed.
Installed today. Everything worked plug and play. The hardest part for me was getting the wire fished through the headliner. Watched a few headliner removal vids and got it with a little work. I ran the cable just on the edge on the passenger side. A few things to note is on the center column between the 2 doors, make sure you get the wire behind the 2 tabs that seat into the frame, the existing mirror will just pull off but the new one spins on (the clip uses 3 of the 6 sides of the hexagon, I had to remove one of the cables to get enough rotation to get it seated. make sure you keep even pressure on the mirror mount and turn slowly until it seats.), and tape one end using painters tape or something similar so that as you fish it you don't pull it out after fishing one end. I started at the third light and ran to the mirror.
Thanks all for the great info and leg work. Loving the camera rear mirror and now I can get my tint done and not worry about not being able to see out.
--------------------------------
2021 RAM 1500 Laramie - 5.7L V8 Hemi with eTorque - 3.92 Rear Axle Ratio - Customer Preferred Package 27H - Sport Appearance Package - Laramie Level B Equipment Group - Uconnect 12 with Nav - 3rd brake light/camera mod - S&B Filter CAI.