2021 night edition third brake light

[vincentw56]

hi, can somebody share their configuration setting for 360 cameras, i think i activated a analog input accidently and now i have a conflict in the bcm, my 360 is not working and am getting a code U0264-00, please help me lol
2020 ram 2500 laramie 12 ucconect with 360 cameras.

You might have better luck in the Homepage - HD Rams forum. This is the 5th Gen 1500 Rams site.

Just a reminder, always backup the configuration in AlfaOBD.

 

[JRD]

Okay folks this is an exciting mod adventure. I’ve read this and the other related threads a few times, but I’m confused on the point about two cameras. On a 2019 Laramie with FCW, ACC, 360 surround view, 12” screen, 2022 BCM slave, and 2023 CHMSL…

With a two-input DRVM, is it possible to add a second cargo camera (in addition to the normal rear view one) to this setup and switch between views on the mirror?

I’ll probably get flamed for seeming like I neglected to read all the posts on here and HDRams, but I read them all multiple times!

Thanks to [mention]Jimmy07 [/mention] [mention]vincentw56 [/mention] and [mention]cskindt [/mention] for helpful replies in the various threads. Seriously great work!


Sent from my iPhone using Tapatalk

Did you ever hear anything back on this? I was trying to add a cargo camera but saw it wasn’t possible, but after stumbling onto this thread I figured I’d see if anyone had any success.

 

[Splatter]

Did you ever hear anything back on this? I was trying to add a cargo camera but saw it wasn’t possible, but after stumbling onto this thread I figured I’d see if anyone had any success.

Unfortunately, I didn’t get any replies other than yours! The smart people in here inspire me to think harder, read more posts, and experiment, but I haven’t endeavored to do any of those things. But, I wait by my phone day and night, hoping to see a glimmer of hope in the form of reply from someone who knows the answer. Grab a drink and pull up a chair. We can wait together.


Sent from my iPhone using Tapatalk

 

[JRD]

Unfortunately, I didn’t get any replies other than yours! The smart people in here inspire me to think harder, read more posts, and experiment, but I haven’t endeavored to do any of those things. But, I wait by my phone day and night, hoping to see a glimmer of hope in the form of reply from someone who knows the answer. Grab a drink and pull up a chair. We can wait together.


Sent from my iPhone using Tapatalk

I’m not an engineer or mechanic, hell even with all the insight on here it’s still a 50/50 if I’m successful in my endeavors lol.

We may have to start a separate thread to see if we can generate some responses. I’d love a cargo camera, especially when the bed cover is flipped on you can’t see anything back there

 

[mk2019ORP]

I lost the auto dim on my 2019 too, do we know what might have caused that function to be deactivated once the new mirror and bcm installed?

I know this is a thing and may be ok with it, but did you ever figure out what the actual “cause” is? Lose a sensor, wrong signal from the BCM? Mostly curiosity at this point as I try and learn my way around more DIY projects.

 

[vincentw56]

I know this is a thing and may be ok with it, but did you ever figure out what the actual “cause” is? Lose a sensor, wrong signal from the BCM? Mostly curiosity at this point as I try and learn my way around more DIY projects.

Yes, we know the cause. If you have a 2019/2020 and you choose to NOT replace your BCM with 2021+ BCM and instead use the 2021+ as a slave unit, you will lose it. The slave into isn't integrated into the canbus. All it does is supplies a signal to the mirror to start independent of the trucks other systems. It can't communicate with any other systems on the truck. Honestly, 2 years in and I've never missed auto dimming.

 

[1923bob]

Does anyone happen to know if this would be a plug n play upgrade for a 2019-2020?

I went with Recon nice light plug -play but not cheap