2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups

[McFly.]

Off road package
Fabtech 3” lift
Fuel Tech Wheels
Falken 35” tires

What width/offset wheel and tire width??

 

[whonut]

12.5” tire width. Wheel chart in pic

 

[tones2SS]

Off road package
Fabtech 3” lift
Fuel Tech Wheels
Falken 35” tires

That looks great!!!

 

[SquillyP]

She’s a little dirty but 2.5 level with 285/65r20 ko2

 

[R.Duff]

She’s a little dirty but 2.5 level with 285/65r20 ko2
View attachment 88566View attachment 88567View attachment 88568

Those the 605's? 20 x 9 or 20 x 10?

 

[SquillyP]

Those the 605's? 20 x 9 or 20 x 10

Yea it’s the 605s and 20x10

 

[Chica999]

Here are a few pictures of the new Lift & Wheel set-up. Very happy to say the least!

View attachment 70364View attachment 70365View attachment 70368View attachment 70369View attachment 70370View attachment 70371

I see this post is a few years old. Do you still have this truck and would you still recommend this setup.

 

[Chica999]

Just got my lift put on this week. Went with a 3.5 ReadyLift. I was worried about rubbing since I use the truck on backroads during the summer. So I went with 285/65R20’s to not be as wide. No rub at all so far. I was also worried about how it would look with these factory wheels. I don’t think it looks too bad, but might change them out someday. View attachment 50006

I see you posted this a while. Do you still like the lift?

 

[Smashius]

Another shot of the set up:

 

[JulepeRAM]

She’s a little dirty but 2.5 level with 285/65r20 ko2
View attachment 88566View attachment 88567View attachment 88568

How tall is your truck with the level and tires? I’m considering a similar setup but the garage is 6’8”...

 

[SquillyP]

How tall is your truck with the level and tires? I’m considering a similar setup but the garage is 6’8”...

I’ll measure when I get home. My truck still fits in my garage but not sure the height of my garage

 

[SquillyP]

How tall is your truck with the level and tires? I’m considering a similar setup but the garage is 6’8”...

It’s roughly 79 in so about 6’5”

 

[Ksiegel9]

Readylift 3.5”
Bilstein 6112s upfront and 5100s in the rear
Toyo AT3 35x12.50x20
Asanti Workhorse 20x10 -20

How’s it ride? Looking at getting a 4inch bds lift

 

[Ksiegel9]

In the field at level 2. I didn’t get a pic but was by another Ram with 4” BDS and I know better lift however they really looked the same if you don’t know your lifts. View attachment 75120View attachment 75121View attachment 75122View attachment 75123View attachment 75124

This is a 4inch bds with 34’s?

 

[Ram89]

Are these measurements with the new tires?

Yeah, this is with my new wheel and tire set up.

 

[Chippy]

No I was saying my Rebel with 2” Daystar lift as I have air with these 35” tires was very close to another Non rebel Ram with a 4” BDS lift (didn’t note the tires) was all. I think because Rebel had the off road lift already compared to the other without it’s pretty close. If you put a BDS on a Rebel I’m thinking it would be a larger lift than I achieved.

 

[Jeansebplante]

 

[Sjblanar07]

Here’s my 2019 Ram 2.5” front spacer and 1.5” rear spacer with 34” Nitto Ridge Grapplers on Ultra Hunters 20x9's and ARE CX Evolve topper. There aren’t too many pics of these caps so maybe this helps someone out... I also have the Morimoto XB headlights with Recon's smoke LED taillights. Overall it is turning out well. A few things left to do. I may upgrade to Fox or Icon Suspension in the near future. Any questions shoot me a message.

 

[Cgs1967]

I had the 2 inch Mopar lift installed along with 295/60R20 Nitto Ridge Grapplers on factory wheels. No rubbing and the fox shocks ride great.

 

[JerryBsizzle]

6" Fabtech lift, 35x12.50r20 Toyo RT's, 20x10 -25mm offset Cali Offroad polished wheels. Rides really good, I love it. Just took her home 3 weeks ago.