2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups

[Ellisstrong]

The ride is marginally different. I wouldn't say worse, it's just slightly different. It's still smooth and a pleasure to drive. But, like all lifted trucks with larger tires, there's a little more "bounce". The aggressiveness of the tire tread pattern can be noticed. An AT/road focused tire like the Nitto Terra Grappler G2 would eliminate that. The higher elevation probably makes the biggest difference. I haven't noticed any road noise at all from the tires and the truck still rides like a Cadillac. I did notice a gear change difference from 2nd to 3rd because of the increased tire size, but again that's to be expected. Especially with my 3.21 gear ratio.

Hey, how are those tires treating you with the 3.21 gears? Do you have any issue with staying in 8th on the interstate?

 

[Richram19]

(see attachment)

Saw this on Instagram, 2019 Laramie with a 2 inch leveling kit, Fuel Lethal wheels and 35 inch Toyo Open Country M/T's

Here is mine..

Leveled 2" Rough Country
20x9 0 offset Twisted Off-road
275/60/20 Nitto Ridge Grappler
Bushwacker Flares

 

[MValdez]

Here is mine..

Leveled 2" Rough Country
20x9 0 offset Twisted Off-road
275/60/20 Nitto Ridge Grappler
Bushwacker Flares

Ah Man are those the bushwacker 50934-02s? I've been waiting to see those on a truck. If you could take a few pics of them @ different angles it would be much appreciated!

 

[Richram19]

Ah Man are those the bushwacker 50934-02s? I've been waiting to see those on a truck. If you could take a few pics of them @ different angles it would be much appreciated!

Sure, I'll get you some tomorrow

 

[cordram]

I just got mine back from the dealership after having wheels/tires installed. I’m running a 2019 Limited; Air Suspension; Off-Road Group/Package (adds extra 1” lift); long bed, and had Fuel Vapors (20x9 +20 offset) with Nitto Ridge Grapplers 35x11.50. Zero rubbing at full lock, zero cutting. After searching this site, reviewing multiple threads, I’m confident that this is the largest tire (20”wheel) you’ll fit on a limited with air suspension. Had I not added the off-road package, they would have rubbed. Less than 1/2” clearance at full lock.

Would love to know what the forum thinks.

 

[Richram19]

I just got mine back from the dealership after having wheels/tires installed. I’m running a 2019 Limited; Air Suspension; Off-Road Group/Package (adds extra 1” lift); long bed, and had Fuel Vapors (20x9 +20 offset) with Nitto Ridge Grapplers 35x11.50. Zero rubbing at full lock, zero cutting. After searching this site, reviewing multiple threads, I’m confident that this is the largest tire (20”wheel) you’ll fit on a limited with air suspension. Had I not added the off-road package, they would have rubbed. Less than 1/2” clearance at full lock.

Would love to know what the forum thinks.
View attachment 25462

Tires look great. Good work

 

[thcmas35]

Limited with air suspension. Added the largest non LT Ridge Grapplers (305/55/20) to maximize the ride comfort on Fuel Rebel 20x9 +1 offset wheels (d680). I also had Daystar spacer installed up front to keep my ride close to stock, along with previously installed revel links to level the front - still need to optimize this. No rubbing or cutting. Posting pics to the chain. Let me know if anyone local and interested in stock ORG Falkens on rims/TPMS.

 

[19Jake]

34" Nitto

 

[zee1313]

 

[heydre]

View attachment 25535
View attachment 25536
View attachment 25537
View attachment 25538

Like the look...tires/lift/rims?

 

[zee1313]

Like the look...tires/lift/rims?

KM3 35x12.50r20
ProComp 3.5 front 2 rear lift
ProComp 20" rims

 

[Richram19]

Ah Man are those the bushwacker 50934-02s? I've been waiting to see those on a truck. If you could take a few pics of them @ different angles it would be much appreciated!

Sorry for the delay. Here you go!

 

[MValdez]

Sorry for the delay. Here you go!

Thanks so much for following through! I love the clean look these fender flares give the truck. Were they difficult to install? and did they give you and additional clearance issues with your tires?

 

[Richram19]

Thanks so much for following through! I love the clean look these fender flares give the truck. Were they difficult to install? and did they give you and additional clearance issues with your tires?
[/QUOTE
They were extremely easy to install factory

Thanks so much for following through! I love the clean look these fender flares give the truck. Were they difficult to install? and did they give you and additional clearance issues with your tires?

extremely easy to install using factory bolts and threaded retainers. No clearance issues at all. Thanks for the comments.

 

[19Jake]

108 to 77.8 hub centric rings
open end black lugs
275/70 OEM Duratrac

 

[Hawaii's Finest]

Motofab 2.5” spacer level with Hardcore H500 22x12-44 offset nitto 420’s 305/45/22. Completed last night. Currently at alignment shop. Will post better pics later. Need to research how to get the tires to rotate evenly.

 

[JeremeVossen]

24x10 Vossen HF6-2 +25 ET
305/35R24 Atlas Tires

waiting to sell wheels of my old car to order IHC 4/6 drop kit

rides like stock in this set up so far

 

[PorBoy]

^^^. Why nice, I’ve always been a fan of Vossen wheels. Had a couple sets on my last show car, never thought about trying a set for this truck.

 

[JeremeVossen]

^^^. Why nice, I’ve always been a fan of Vossen wheels. Had a couple sets on my last show car, never thought about trying a set for this truck.

this is a new realm for us here but it's going pretty well

i put a link below with a more offroad look

DODGE RAM LARAMIE - HYBRID FORGED SERIES: HF6-1 - Vossen Wheels

DODGE RAM LARAMIE - HYBRID FORGED SERIES: HF6-1 - Vossen Wheels

vossenwheels.com

 

[Hawaii's Finest]

I was thinking about spraying in the bed liner hot rod red. Your thoughts?