2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups

[DeDax]

Thanks Lux, I will certainly take a look and see if 9.5 is an option. I was kind of leaning towards the ridge grappler just nervous on the rubbing with the additional offset of the wheel. I've had Terra grapplers before are the RG much louder?

 

[MValdez]

So I am really considering the Mayhem Prodigy 8300 20x9 0 offset, on my RC 2" leveled laramie. But i am bamboozled on tires, anyone have idea's with this wheel set up what tire set up would work with NO rubbing or trimming? Thanks for your input.

I run 305/55R20 116Q nitto Ridge grapplers ( 12.44" wide tires) on 20x9 +18offset wheels and my truck is factory height without ORP and I have no rub at full crank both directions. ( they've rubbed 2 times when I reversed quickly at full crank). you'll be totally fine having the 2" level on your truck

 

[DeDax]

Anyone have any idea maybe on a 295/60/20 Ridge Grappler on the aforementioned setup?

 

[Rob3989]

2” Mopar , 20x10-18 Fuel Contra wheels wrapped in 35x12.50 Nitto Ridge Grapplers. Zero rubbing.

 

[RodRow]

Mine has went through a couple different steps and I’ve shared most of these in my towing thread but figured I would add them here also to this wealth of knowledge.

Stock form the day I brought it home...

View attachment 17729

275/65/20 Firestone Deatination MT2 on stock rims and stock height. They did not rub but came VERY close...

View attachment 17731
View attachment 17730

2” RC leveling kit fixed the clearance issues, room to spare now...

View attachment 17732

And for those saying they do not want to level because they tow, I installed the Timber Grove air bags and have no issues. Here it is pulling a 27’ camper (32’ bumper to hitch) with an advertised dry weight of 6600 pounds and hitch weight of 660 pounds. Real world that puts it in the upper 7,000’s with 800+ pounds on the hitch. I have 35 psi in the bags and everything still sits level.

View attachment 17734
View attachment 17733

The MT tires are temporary, I’m going to be switching them out with the Nitto Ridge Grapplers...just trying to decide if I want to go with a 275, a 285, or a 295 on my stock wheels.

I went with 295/55/20 Ridge Grapplers on my leveled Laramie and LOVE the look!
https://5thgenrams.com/community/threads/max-steel-laramie-4x4-leveled-loved.5570/#post-104680

 

[CallMeChris]

I went with 295/55/20 Ridge Grapplers on my leveled Laramie and LOVE the look!
https://5thgenrams.com/community/threads/max-steel-laramie-4x4-leveled-loved.5570/#post-104680

That looks fantastic and helped to make my decision easy. I was worried about the 295 being too wide and ballooning around the rim but it looks about perfect.

 

[13hdking]

Some very nice wheel and lift combinations in here. Gives me plenty of options to deliberate. Really enjoyed this thread.

 

[DieselDak]

Air suspension Rebel
2" front level
37x12.50 Nitto Ridge Grapplers
18x9 -12 Method 305s

 

[Joeyp]

Air suspension Rebel
2" front level
37x12.50 Nitto Ridge Grapplers
18x9 -12 Method 305s

View attachment 18271
View attachment 18272

37's look good!

 

[w0bbles]

Air suspension Rebel
2" front level
37x12.50 Nitto Ridge Grapplers
18x9 -12 Method 305s

View attachment 18271
View attachment 18272

Wow, that looks amazing! So just 2" front level, no additional lift? What did you have to do to resolve rubbing issues?

 

[DieselDak]

Wow, that looks amazing! So just 2" front level, no additional lift? What did you have to do to resolve rubbing issues?

I removed, the little mud flaps and bent the pinch weld back. Really not a lot involved with the DT vs. the DS.

 

[w0bbles]

I removed, the little mud flaps and bent the pinch weld back. Really not a lot involved with the DT vs. the DS.

Very cool! Thank you for the info!

 

[Awd1990tsi]

Got my 3.5" ready lift installed, and the new wheels and tires. So happy with how the truck looks now, and seem to get quite a few compliments in parking lots and gas stations.

 

[PorBoy]

^^^. That color paired with the lift is very sharp looking ...

 

[Joeyp]

Got my 3.5" ready lift installed, and the new wheels and tires. So happy with how the truck looks now, and seem to get quite a few compliments in parking lots and gas stations.

View attachment 19035View attachment 19036

Truck looks sick...what size tires, wheels and offset?

 

[Awd1990tsi]

Truck looks sick...what size tires, wheels and offset?

35x12.50R20 tires on 20x9 +1 Fuel Contras

 

[Joeyp]

35x12.50R20 tires on 20x9 +1 Fuel Contras

I'm doing the same setup except with the new Fuel Shok....Do you have a pic from the front so I can see how far your tires poke out? Pick up truck tomorrow and then it goes in for all of my mods.

No rubbing right?

 

[KevinB79]

I was the same. Originally planned on a 3.5-4" lift and ended up pulling the trigger on a fabtech 6" on black Friday sale from realtruck.com. On top of that I ordered 20x10 Fuel Sledge Wheels and a set of 35x12.50 Nitto Ridge Grapplers. I cannot wait to install everything. The hardest part is waiting. I'm in Iraq currently and won't be home until mid December so I have to wait to do everything and I don't know if I want to be installing everything in my non heated garage in the middle of December!

That’s funny I want the same Rims for my 2019 Ram Laramie sport crew in black.

 

[KevinB79]

Here’s my Big Horn with 6inch Fabtech lift and 20X10 Hostile Sprockets on 35X12.50 Toyo Open Country tires.View attachment 8499View attachment 8500

Here’s my Big Horn with 6inch Fabtech lift and 20X10 Hostile Sprockets on 35X12.50 Toyo Open Country tires.View attachment 8499View attachment 8500

whats the offset on your wheels and how many inches is the lip on the wheel? Trying to get some ideas with what I wanna get for wheels. I have the fender flares on my Ram. I want the wheels to stick out no more then 1.5-2 inches..police officers will give me a hard time if I have a wheel that sticks out to far here in state Rhode Island.

 

[KevinB79]

Here’s my Big Horn with 6inch Fabtech lift and 20X10 Hostile Sprockets on 35X12.50 Toyo Open Country tires.View attachment 8499View attachment 8500

Do you have 3.21s or 3.92s axle ratio? If you have 3.21s does your truck feel as quick as it was when it was stock compared to now with the 6 inch lift and did your speedometer change?