Billet1500 4x4
Ram Guru
I would never had guessed you had 275 65s on there, I would have thought you were running a 295 60 doesn't look like a 295 would have cleared, at least on the offset you're running
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups
- Thread starter Jared B
- Start date
Here is my Rebel. Just lifted it today. 3.5” lift from a stock Ram. Rebel is 1” higher than stock Ram. 2.5” Motofab front spacer and 1” CST rear coil spring spacer. Has the Ready Lift UCA. 295/60 20 Ridge Grapplers.
XD Grenade 20 x 9 wheels +18 offset.
XD Grenade 20 x 9 wheels +18 offset.
anthonysnell
Active Member
- Joined
- Jan 22, 2018
- Messages
- 36
- Reaction score
- 11
- Points
- 8
Thank you for the pics. Great looking truck
19llhpb
Ram Guru
IMO, that set up would probably be fairly tight. You will more than likely still clear the frame but would probably get into the ‘harder’ plastic that is on the bottom rear of the front fender wells. Guess it’s hard to say for sure. Good luck!
blownout1500
Well-Known Member
- Joined
- Sep 17, 2018
- Messages
- 260
- Reaction score
- 287
- Points
- 63
- Age
- 48
Thx. Realized 17” won’t actually fit our big brakes so ended up ordering 18x9 -12os but now I’m hearing even some 18” wheels won’t clear calipers. Fingers crossed.
19llhpb
Ram Guru
I was wondering about the 17’s fitting after I responded. Also, after looking at mine closer today, it will definitely be a close call on hitting some metal behind the plastic on the lower rear front fender wells with a 2” level and 35x12.5 with a ‘0’ offset. Hopefully you would be alright but just seems it may be close. Hope it works out for you!
Savagescott
Active Member
- Joined
- Sep 7, 2018
- Messages
- 139
- Reaction score
- 32
- Points
- 28
- Age
- 58
Ordering my truck soon and this is really close to the wheel/tire look I'm going for. I'm trying to determine if I can do a slightly taller and wider tire - maybe a 295/60 or a 305/55 You say you have plenty of room... Based on what you see, could you fit a little bigger and/or wider tire in there?
mikemcfarland
Well-Known Member
Grayfuji
Active Member
Looks great!
Savagescott
Active Member
- Joined
- Sep 7, 2018
- Messages
- 139
- Reaction score
- 32
- Points
- 28
- Age
- 58
Looks great! I’ve been trying to determine if this was possible. Can you give more details? Specs on your truck? Did you lift it or is stock? If lifted how much, which kit? No rubbing at all?
Sorry for all the questions. Would love to talk.
troutspinner
Ram Guru
That looks great. Same truck as mine but I believe that is Laramie, I have the Big Horn. With the 2” plus extra spacer that netted you 2” total over Off Road Package increase correct? I am looking to do the same and ordered a Readylift with control arms level kit.
Samcpatterson
Member
- Joined
- Sep 28, 2018
- Messages
- 14
- Reaction score
- 2
- Points
- 3
- Age
- 60
Sharp look! Was front level..by how much? Also, is this 4x4 with off-road package lifted by 1"? Can you describe suspension specs? Thanks man.
subaru79
Active Member
Hey, what is the extra spacer used? Thickness of Spacer? I have Mopar lift on 2wd Laramie w/ long bed and Tow Pkg. but looking to get front just little higher.
subaru79
Active Member
Did you use the Pre Load spacer and 1/2" spacer? or just 1 of the 2. Thanks
I’m not sure about that but the way they made it sound they used both. I can ask the guy Monday if you would like.
