wiring

Good evening, Im new to wiring but would like to learn. I am looking into installing an active exhaust on my truck, 2019 Ram 1500 Laramie and have found this kit...

Hi everyone! I drive a 2021 Ram 1500 (US spec, Built-to-Serve edition) based in the UAE. The truck came with the BW48-11 transfer case, which features a 4WD Auto mode. Around 60,000 km, I began receiving repeated 4WD Overheating warnings during desert trips. Eventually, the transfer case...

I am currently retrofitting the cloth seat seats on my 2020 BH I was able to find a set of limited seats with all of their wiring intact. My question for this forum is would I be able to buy a wiring harness that fits the seats If so, would anyone be able to help me find the part number if I’m...

I just traded in my 19 ram 1500 Laramie for a 25 Laramie.I transfered my A.R.E bed cap which fits good. The problem is the wiring for the bed caps keyless lock feature. My bed cap dealer stated a wiring change and that the voltage going through the wire is not high enough. Any one with similar...

One common problem we run into when installing aftermarket lights is that they always come with universal switch harnesses that require you to drill holes in your dash. I hate doing that. Here's a video I put together on how we work around that to cleanly control lights and accessories in your...

Just want to share headunit wiring color codes.

Hello, I am currently wiring up some grill lights on my 2023 Rebel with the LED headlights. The off-road lights I am installing have a DRL “halo” function. I want the halos on the off-road lights to come on with the DRL headlight strips that come on whenever the engine is running but I’m...

Hey Folks, My ram has had ongoing intermittent backup camera failures that the dealer can’t resolve. I’ve had a new camera installed and console screen as well. Last visit, they said to maybe replace this cable: 68416840AA. I can’t figure out where this cable physically is in the truck so I can...

Hello, Is there any info available on the signals wires from the Infotainment 12” screen to the Alpine amp (amp connector #1)? At this point in the signal chain do they have PEQ correction, any dynamic limiters etc, do they have a dc offset, what is their voltage range, and are they fixed or...

Hi I need some help... I have tried Dodge in Tacoma but there not willing to really help at all or only want to work with stuff if i have a Vin #... the Problem was.. the 2014 Bed was damaged and had to be replaced.. I got another bed off of a 2020 Tradesman that was Brand New for $500, got it...

I recently bought a 2020 Ram 1500 crashed from auction, and fixed all the body work that it needed, as there was nothing mechanically wrong with the truck. However, since the very first day, I’ve had issues with the headlights. Sometimes the headlights will turn on and work properly, then...

Hello everyone. 2021 Rebel with the 19 speaker Harman/Kardon system. I am replacing speakers while keeping the factory HK amplifier, and what I cannot determine is the accurate subwoofer to amplifier wiring configuration. I understand there are 3 voice coils on the subwoofer, each at 2.2ohms...

I do not own a test light to check for power . Anybody know which wire coloring is pos/neg?

Help... I have a 2020 Limited 1500. I don’t want to drill or otherwise alter the truck. But I do have a HAM radio license, tow a boat and trailer, have backup lights installed but not wired, etc. I was gifted a CanBus switch, but have no idea if I can integrate it into the truck’s existing...

Hi Guys, Been reading a lot here but first time posting. I've got a 2020 1500 and installed a Westin Lightbar earlier this year... The light bar has a toggle switch that can run high beams or a daytime running light sort of thing. I want to wiring the lightbar to a key-on power source only...

Hello, I have a general question about getting through the firewall of a 2019 Ram 1500 Longhorn, Hemi, NO E-torque. I have a HAM radio (as in a 2-way radio, CB, etc) that I want to wire directly to the battery. The radio needs 20 amps (it would work with 15 amps but I was told I should go...