Search results

You need to but the suspension in jack mode before hooking it up.I’ve never heard that tow haul mode stops the suspension from adjustment, but I may be wrong. I set my trailer up with jack mode set the height etc and it is perfectly level after switching jack mode off

Does the air suspension trucks use the same Hellwig bar, even though the stock bars are different from what I’ve read?

Its kinda tight but…../you can do it! just start the Allen bolts by hand and use the short end of a Allen wrench and you can get it.

I can’t believe a tire that size wouldn’t take any weight. I would get them rechecked. Looks good!

Looks great!

A simple thing to do is open the hood and leave it open for a few minutes after washing. Seems to drain fine. I was using a blower but that still allowed the water to still drip out after driving.

I put those airlinks on mine. Just the front to level it out. They aren’t as fancy as some billet with rubber boots etc, but I just wanted something to raise the front a little (not full level) too harsh, and Also level the left front being low. You could make your own, for probably half or...

The 8speed is the best thing that ever happened to the Hemi. Everyone likes different things I guess.

If they are similar to the wild peak AT as far as noise, then I am good with them. I even thought the Rebel Duratrac weren’t noisy. It’s just $380 a tire and I don’t want to regret Buying them.

I have noticed the same, putting some cooler air down low seems to make the seats feel cooler.

I’m in the same predicament. I just worry about noise. After running ko2’s on my 19 for 50k, I’m enjoying the stock sound or lack of, it want or need a better winter tire. I would imagine your Speedo is off slightly, have you checked with your phone using a speedometer app?

Do you have another key?

Try turning the second press horn sound to off then try it by pushing the key fob. Then go back in and turn honk with second press back on and see if it works. I did this on mine and it came back on. Try a similar thing with the blind spot setting.

Pull up to a closed garage door or wall, open the hood and turn the adjuster screw so it drops the beam 1-2”.

My 21’ came wirh a leading edge piece of film on it, but from previous experience on my 19 you need it wrapped to the actual body panel because they get hammered. I get my whole rocker panels and flares covered with film.

my 21 I just got works much better and is actually cold. So the TSB should fix the issue. But you need dash removal and a dealer that will do it. My 19 sucked when I first got it but after some PCM updates the radiator fan ran much stronger and helped keep the condenser cool and also varied with...

How is the road noise?

Buy the Andersen, I believe if you are not satisfied they will take it back if you buy it direct. It’s a simple good hitch for a half ton in my opinion. My friends have them and agree too.

I’ve used the Andersen on my 13 and 19’ works good for me. I like the simplicity.

Go to the parts dept have them look up the part number for the windshield. It’s available. It takes a while possibly because it’s vendor shopped direct. mine took about 6 weeks unfortunately. You aren’t polishing that out nor would I want it.