Recent content by TRIBUTE100

Just replaced the original battery in my 2021 Ram 1500 5.7L eTorque Big Horn Crew Cab with 12,600 miles. I don't drive it much except to pull a TT, but the original was approaching 4 years old and I don't like to go much longer than that. The book calls for an H7 size but I decided to upsize to...

I understand the e-Torque system falls under the emission control and is covered beyond the normal warranty according to some posts on this Forum.

I don't think there was any gas in the fill neck. My technique now is to fully insert the nozzle, manually lightly squeeze the trigger until fuel is flowing, then put the trigger on the first notch. Using this method and not putting any more in the tank once it clicks off, the fuel gauge shows...

Very strange situation happened on a camping trip last week. I had left my tailgate open during the day because we were getting things in and out for Halloween decorations. It was about 80 degrees F and the tailgate was in full sun most of the day. I went to shut it late in the day and it would...

This just happened to me on my 2021 Ram 1500 DT Big Horn eTorque 5.7L with about 8,500 miles. Got back from a camping trip at Cades Cove in the GSMNP about 3 weeks ago. I thought I had taken the truck down to fill up the gas tank after I got back, and had not driven the truck since then...

When I change out batteries I just put some alligator clips on the clamps attached to another battery. Then the truck is always connected to 12 volts.

Just read this on the MoparPartsGiant.com site which has the genuine factory batteries. The battery in my 2021 Ram 1500 5.7L eTorque has the P/N 56029635AC, so it's not an AGM according to this, but it is a maintenance free lead acid battery. Q: Is this an AGM batteryPosted by Customer: 2014...

Firestone Complete Auto Care finally got their alignment machine updated in early November 2022 and I got the lifetime alignment. That was right before I installed new Cooper AT3 XLT Load Range E tires on my truck. I'm running them at 50psi when not towing and the truck is handling great, just...

I just put 4 - 275/55/20 Cooper Discoverer A/T 3 XLT Load Range E tires on my 2021 Big Horn because I tow a 7500# GVWR TT. With no load I running them with 50 psi and will pump them up to ~65 psi when I tow. They're stiffer than the OEM's but ride smooth and almost as quiet as the OEM...

I took my 2021 Ram 1500 5.7l Big Horn in to the dealer for an oil change back in March 2022 for the 1 year oil change at 3,583 miles. I got to looking at the receipt, no charge, but they put in a 5W20 synthetic blend. Man I was pissed, i had assumed they'd put in full synthetic. I asked the...

After towing our 34 foot travel trailer, 7500#GVWR earlier this month with my 2021 Ram 1500 Big Horn Crew Cab 4X4, 5.7L eTorque, 3.92 Ratio Axle, OEM Bridgestone Dueler 275/55R20 113T Tires, Air Lift 1000 Coil Spring Air Bags, Fastway e2 800/8,000# Load Leveling Anti Sway Hitch on the Interstate...

Back in March I took in my 2021 Ram 1500 DT 5.7L e-Torque Big Horn to the dealer for an oil change. I bought it in March 2021, so I didn't want to go past the 1 year mark even thought I only had 3,600 miles on it. The dealer said I should change the oil every 5,000 miles even though the manual...

I just checked my 2021 Ram 1500 DT Big Horn and with the doors locked my gas flap still opens. I'm not worried about someone stealing gas at my house because I live in a secluded location, but with gas prices now high you never know when your out and park it someplace. More likely to get the...

I just checked with my local Firestone Complete Auto Care and they still don't have their alignment machine updated to handle my 2021 Ram 1500 DT 4X4. The service writer knew right away they couldn't do it, but said they were scheduled to update, but didn't know when. I took the truck to the...

I just finished installing the Hellwig 7709 sway bar on my 2021 Ram 1500 Bighorn 5.7L Crew Cab 4X4 Short Bed 3.92 rear axle with 3,300 miles. It took me about 1 1/2 hours including gathering and putting up my tools. I used the middle hole after checking to make sure it was big enough, which it...