2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups

[NJC1684]

Tuff Country Level + UCA
20x10 -24 LRG Burst Wheels (about an inch of poke outside of the oem flares)
275 60R20 Continental TerrainContact Tires

View attachment 58153 View attachment 58154

Snow me the poke!

 

[NH_Ram]

1.5" strut extension and UCA's from ReadyLift 3.5" SST kit and 35x12.50x20 BFG KO2's on 20x9 +1mm Fuel Blitz rims. Factory 1" lift with North Edition.

 

[Atlantic Blue]

Snow me the poke!

 

[TonyTheTruckGuy]

Added 285/65R20 BFG T/A KO2’s to mine. 1.5” leveling kit with stock 20x9 wheels which are about +19mm offset. Only rub is at full lock on the OEM mud flaps. Discount Tire messed up and put a 275/65R20 on the left front, so the last 3 pictures show how the 275/65R20 would look with my setup. 3rd from last pic you can compare the front 275/65 to the rear 285/65.

 

[NJC1684]

View attachment 55548

6" lift with 22" x 10" Fuel Vandal wheels. Rides pretty good!

Side shot?

 

[SNAFU88]

2020 Laramie before:

On Saturday I swapped in a set of 275/60-20 Cooper Discoverer 4S tires on 20x9 et 0 Level 8 Hauler wheels.....here's the after:

The stock 20s with the 32" tires weigh 75lbs each. The Coopers on the Level 8 wheels weigh 80lbs each, so I gained an inch but only 5lbs of unsprung weight. Driven about 200 miles since the swap and gas mileage is unchanged. Zero difference. Tires are silent, and ride beautfiully. The Ram ride quality was a huge reason I bought the truck so as much as I wanted a bigger diameter, I was hell bent on not going to a heavy E-rated tire. And as much as I love the look of a leveled truck, I am holding off for now because I would only want the Mopar lift kit and that's not in the budget right now. Very happy with how this set up looks and performs, though. Few more angles:

 

[20Longhorn]

Level and tires.. some of the best money I've spent on her

Sent from my iPhone using Tapatalk

2019 Limited 4x4 with ramboxes, no etourque
- Borla cat-back touring with resonator
- 20% ceramic tint all around and pano
- Leveled with Daystar spacers and revel links (0.5in rake)
- Nitto ridge grapplers 285/55r22 (34.6x11.7)

Looks great, those are the tires I want to get but need to know if I can fit in the parking garage at work. Do you know the height on your truck? Can you fit in a 7foot garage clearance?

 

[20Longhorn]

XD Heist 22x10 -18 offset
Ridge Grappler 285x60x22 34.8" height
Daystar 1 1/2" leveling kit
Revel Performance links
Ram Airflow

Badass! What is the height of your truck?

 

[TonyTheTruckGuy]

Added 1/4” wheel spacers to the front and 3/8” spacers to the rear to get both axles as close as possible to same width and just make the wheels pop a tiny bit more. Still 1.5” level with the 285/65R20 BFG KO2. Also trimmed the OEM mud flaps so no more rubbing.

 

[2019REBEL]

Added 1/4” wheel spacers to the front and 3/8” spacers to the rear to get both axles as close as possible to same width and just make the wheels pop a tiny bit more. Still 1.5” level with the 285/65R20 BFG KO2. Also trimmed the OEM mud flaps so no more rubbing.

Looks like you need to poke a few holes in the mudflaps, looks like accumulating mud/dirt.

 

[orange01z28]

2.5" Motofab leveling kit
22x12 -57 Vision Sliver Wheels
33x12.50 Amp Attack MT
View attachment 55916 View attachment 55917

How are you liking that leveling kit after having it for awhile? I'm really thinking of grabbing it

 

[d15nonvtec]

How are you liking that leveling kit after having it for awhile? I'm really thinking of grabbing it

Not bad, everything is normal, ride is about the same. the 22s make it ride a bit rougher with the smaller sidewall.

 

[BiGJZ74]

Just added some 35x12.5r20 Nitto Ridge Grapplers today to go along with my Combo Readylift 3.5"/Bilstein 5100/5160 Lift which was installed on Monday.

 

[TonyTheTruckGuy]

Looks like you need to poke a few holes in the mudflaps, looks like accumulating mud/dirt.

Yeah, they are definitely collecting crap. That's the main gripe people have with these OEM mud flaps. They do have a few slots in the bottom but clearly they don't work. I was thinking about drilling a few holes as well.

 

[jj_kennedy]

2" Level
33" Atturo AT
22" Ultra 203

 

[Jyates04]

Those of you with the ReadyLift 3.5”. Have you had any issues with the lift (ie: noises, clunking etc)? How long have you had the lift on for? I’m on the verge of buying the lift but I’ve read so many conflicting posts. The ratio of trucks with the lift vs the complaints aren’t checking out. I’m willing go give up a little ride comfort for height, that seems to be the only consensus in my research.

 

[MaxSteelTX]

Those of you with the ReadyLift 3.5”. Have you had any issues with the lift (ie: noises, clunking etc)? How long have you had the lift on for? I’m on the verge of buying the lift but I’ve read so many conflicting posts. The ratio of trucks with the lift vs the complaints aren’t checking out. I’m willing go give up a little ride comfort for height, that seems to be the only consensus in my research.

I’ve had my readylift since Feb and I’ve had zero issues with noises.

 

[MarkB67]

2019 BIGHORN with 35x12.50R20–Bilsteins at #5 and 1-1/2” spacer in rear

 

[Ortiz7983]

Mopar 2” (updated) with 35x12.5x20 on a 20x9 et 1 fuel rebel.

I’ve got ORP springs in my shop, I’ll probably get around to install them this week or next at some point.

I wonder If the 22’s black appearance wheels will fit the 2” Mopar lift.

 

[Ortiz7983]

Installed last week. Mopar 2” lift along with 33x12.5 AMP MT Attack tires on my 2019 Canadian Ram Sport.

Any other pictures? Also, do the tires rub?