ExcursionDiesel
Ram Guru
- Joined
- Jul 8, 2018
- Messages
- 985
- Reaction score
- 900
I'm waiting on parts as well. Thanks for the update.Just got this email from my sales rep on my now month ago ordered pin and handle mounts for the RamBox bed extender:
I'm waiting on parts as well. Thanks for the update.Just got this email from my sales rep on my now month ago ordered pin and handle mounts for the RamBox bed extender:
Extender posts installed by dealer this morning without issue. They also closed a gap on my rambox for me.
He did it in less than five minutes while I was standing there. Mine was slightly protruding at the end so it created too much lip sticking out. It now is flush with the rest of the body.How long did they have your truck to adjust the RamBox?
He did it in less than five minutes while I was standing there. Mine was slightly protruding at the end so it created too much lip sticking out. It now is flush with the rest of the body.
Having removed and reinstalled a RamBox, I'm curious how he did it?
Mine wasn't an up and down issue that might be more involved like you had. It was the seam sticking out to much from body. I believe he loosened these bolts in picture and slid the box back a bit before retightening. (Picture is from 2018 loaner)
Thanks. I don't recall much play with just those side bolts loose because the whole RamBox is very tight in there with any bolts tightened. Glad it worked out for you!
I posted instructions on that a long time ago Nothing like your procedure, which allow much more adjustment than the "in and out" of adjusting the lid screws.Having removed and reinstalled a RamBox, I'm curious how he did it?
Picked up the divider today and instead it , shop around I got if from local dealer for $275
This should be all you need... you can always call the dealer to be sure.
Bed divider:
https://www.allmoparparts.com/sku-y...cbSIsQh4BP8-2iOY3p5hZ30ElU2UbZXhoCCQ0QAvD_BwE
5'7" Utility Rails:
https://www.allmoparparts.com/sku/82215285ab.html
Only if it's coupled with RamBox, right?Yeah... looking through the brochure it contradicts itself in a couple of places. But the divider itself appears to be a separate item and not included in the BUG.
Why would the spray in liner be for only those models?