What did you do to your Ram today???

[HEMIJAKE]

Wow that’s crazy! That’s really short. Technically my garage door is 2 inches shorter than the truck but I guess the angle helps it clear. I added 3/4” spacers in the rear since this pic and now I don’t think it’ll fit. Oh well, I only did it just to get a funny pic anyway lol I’m used to having to work on the truck in the street alwaysView attachment 148025

I should have taken a picture last week but I didn't think of it. I had to back the rear of my truck into the garage stopping just short of the cab. It was 5 degrees here and my tailgate was frozen shut. Had to blast the torpedo heater under it for half an hour. Left mine and my son's hockey equipment in it and couldn't get it out.

 

[LuvGun]

didnt do anything to the ram but to me, getting closer to be able to drive again,.. broke my knee at the end of november, had to get surgery for it, well today they remove the stitches ill be allowed to put weight on my leg(knee) in 2 weeks View attachment 147977

Get well soon

 

[crusher]

Get well soon

thanks, cant wait to drive the ram again and to install all the new stuff i have for it

 

[silverWS6]

I’m unfamiliar with the logo, but going to respectfully guess - Ken Block?

Yes, it's from his last Pikes Peak car (Hoonipigasus).

 

[OneEmmanuel]

Tinted windows and windshield.

 

[Belvedere]

I should have taken a picture last week but I didn't think of it. I had to back the rear of my truck into the garage stopping just short of the cab. It was 5 degrees here and my tailgate was frozen shut. Had to blast the torpedo heater under it for half an hour. Left mine and my son's hockey equipment in it and couldn't get it out.

When I brought my truck home for the first time my wife sat in the bed to make sure it would clear. then we realized I could have just opened the roof cover.

I still have a few inches of clearance. Hopefully enough for a front end level and maybe 34's.

 

[jmrhodes212]

Fuel Sledge and Revo 3s to replace the stock Pirelli's.

 

[Doc33]

How did you mount the kc cyclone lights under your hood? Screw them to the metal?

Yes

 

[SKT Customs]

When I brought my truck home for the first time my wife sat in the bed to make sure it would clear. then we realized I could have just opened the roof cover.

I still have a few inches of clearance. Hopefully enough for a front end level and maybe 34's.

The nice thing is since the antennas on the back if you level the front it won’t affect the overall height and 34s will only raise it an inch so you should be fine!

 

[jl13]

When I brought my truck home for the first time my wife sat in the bed to make sure it would clear. then we realized I could have just opened the roof cover.

I still have a few inches of clearance. Hopefully enough for a front end level and maybe 34's.

when I test drove mine, I took the sales man with me and he was suppose to spot me.
Almost took out the shark fin antenna because he got distracted with his phone or maybe it was his plan
I break it I buy it

 

[LuvGun]

Just saw these on the AJT site

Products | ajt-design

www.ajtdesign-llc.com

 

[HSKR R/T]

Just saw these on the AJT site

Products | ajt-design

www.ajtdesign-llc.com

Cool story

 

[cskindt]

I got some new tires to go on my new take-offs to fit under my previously installed level/lift.
Installation is scheduled for Tuesday.

Hankook Dynapro AT2 Xtreme RF12, 295/70r18

I found the tires for a reasonable cost and 10% off.
The wheels were priced reasonably too , but the drive to get them wasn't .

 

[HSKR R/T]

Spraying bed liner on my @VICE design front skid plate. Still in progress

 

[PurpleRT]

I got some new tires to go on my new take-offs to fit under my previously installed level/lift.
Installation is scheduled for Tuesday.

Hankook Dynapro AT2 Xtreme RF12, 295/70r18

I found the tires for a reasonable cost and 10% off.
The wheels were priced reasonably too , but the drive to get them wasn't .

View attachment 148065View attachment 148066View attachment 148069View attachment 148070View attachment 148071

So much tire lol i dig it


Sent from my iPhone using Tapatalk Pro

 

[toyboy1980]

Just saw these on the AJT site

Products | ajt-design

www.ajtdesign-llc.com

Pre-ordered them a while back. They came today. Pretty cool. Key fob matches my truck now (white and black).

 

[Steele713]

Got a nice pic of my unique color. Sun was hitting er just right

 

[Idahoktm]

I got some new tires to go on my new take-offs to fit under my previously installed level/lift.
Installation is scheduled for Tuesday.

Hankook Dynapro AT2 Xtreme RF12, 295/70r18

I found the tires for a reasonable cost and 10% off.
The wheels were priced reasonably too , but the drive to get them wasn't .

View attachment 148065View attachment 148066View attachment 148069View attachment 148070View attachment 148071

Looks good. Now you need some black lug nuts. Here's a link to a post I made about the Amazon lug nuts I bought.

Black Lug Nuts

Why pay over $100 when you can pay $40 and get the same lug nuts??? They are not the same. If you live in a wet/snowy climate, those Amazon lug nuts will rust.

5thgenrams.com

 

[Steele713]

Yeah that's a great color

Thanks. Love I have not seen another like it...yet

 

[Steele713]

Looks good. Now you need some black lug nuts. Here's a link to a post I made about the Amazon lug nuts I bought.

Black Lug Nuts

Why pay over $100 when you can pay $40 and get the same lug nuts??? They are not the same. If you live in a wet/snowy climate, those Amazon lug nuts will rust.

5thgenrams.com

Thanks. Just put these rims and been looking to get the black lugs and a lock