What did you do to your Ram today???

[securityguy]

That's for an Xpel package. Waiting to hear back from another place that uses Suntek. Cost of living in Southern California, I guess..

Now that explains a lot...Southern CA

Here in N. FL, you can get your front bumper, quarter panels, headlights, mirror caps, full hood, door handle cups, door edge guards, A-pillars and roof forward of the pano for between $1200-$1500 with Xpel.

 

[davidn0021]

Now that explains a lot...Southern CA

Here in N. FL, you can get your front bumper, quarter panels, headlights, mirror caps, full hood, door handle cups, door edge guards, A-pillars and roof forward of the pano for between $1200-$1500 with Xpel.

yeah, it does suck to live here sometimes... gonna need to get other quotes too, but i have a feeling they'll all be at around the same price. Most likely the labor cost that's super high.

 

[Solosnavy]

Went and hit some trails and got my first set of desert pinstripes started buffing today and it's cleaning up nicely but I need new pads.

View attachment 78510 View attachment 78511 View attachment 78512

I have some pinstriping also, was able to buff must of it out. doesn't bother me at all cause i had fun doing it. but if some one were to door ding me id never let it go.

 

[Grouper]

Black 4X4 emblem. That's the last of the chrome emblem replacement.

I think I'll have the OE exhaust tips powder coated black.

 

[CPenn1086]

Black 4X4 emblem. That's the last of the chrome emblem replacement.

I think I'll have the OE exhaust tips powder coated black.


View attachment 79258

Looks good! I have all the badges ready to go for my blackout. Perhaps I missed it, but have you decided to stick with the chrome badging on the Sport hood? Or are you planning to replace the entire plastic bezel at some point?

 

[Grouper]

... Perhaps I missed it, but have you decided to stick with the chrome badging on the Sport hood? Or are you planning to replace the entire plastic bezel at some point?

I'll probably end up replacing the whole bezel. I'm not really digging the overlays. They are good quality and precisely cut, but it just doesn't look as good as a the factory black, in my opinion.

 

[Gitter]

Just installed my Christmas presents! The Putco 60" LED Lightbar and the LUYED LED backup lights:

 

[z0n3]

Black 4X4 emblem. That's the last of the chrome emblem replacement.

I think I'll have the OE exhaust tips powder coated black.


View attachment 79258

Are you sticking with the black overlays on the sport hood? I was wondering if you could do a closer picture of that as I’m leaving that way more than replacing the entire thing. Looks good!

 

[My_first_RAM]

First off, I want to express a very sincere "Thank You" to every single person who provides input on this forum. Over the course of the last month and a half I spent a ton of time reading different thoughts and ideas when it comes to making these RAM's tough! The insights and information were key in helping me build my truck to my liking but with input from all of you. Again, Thank You.

Here is a list of stock and custom accessories I've added since getting my stock 2020 RAM Limited w/ air suspension back in July. I would not change a thing!

1. Borla S-Type Cat-Back Exhaust with 5" Black Chrome tips (Borla 140752BC)
2. Mopar Auto-step
3. Stock Mopar Tonneau cover
4. Window tint - 20% to match in front, 5% rear and sunroof
5. Fuel Rage 20x9 +1 offset wheels
6. Federal Xplora MTS tires - 33x12.50x20
7. Kykr 12" premium screen protector (Love it!)
8. IGL Kenzo ceramic coating (paint, glass, plastic, wheels)
9. Xpel paint protection film - full fender and flares, A-pillar, roof, mirrors, rockers, grill, hood
10. Mopar Crew Cab Slush Mats Floor Mats - (https://www.amazon.com/gp/product/B07M78Y778/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1) - $114
11. Dawn Enterprises - Chromline painted body side molding (sorry blackout guys, i'm old school so like a little chrome to match my wheels)
12. Putco Blade 60" Tailgate Light Bar - (thanks for the tip on the "Swpeet nylon round spacers) - the right spacers did the trick in making sure the tailgate doesn't hit the light bar when opening and closing
13. LFPartS USA American Flag Metal Embossed LIcense Plate - (https://www.amazon.com/gp/product/B07812QC46/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1)
14. Carbon Fiber decals which include hood detail and RAM logo's on front doors and grill - reflectiveconcepts.com
15. Painted Sport hood bezel/vents and tailgate RAM logo
16. Factory spray-in bedliner
17. Tailgate seal kit
18. Headlight/Fog/Tailgate/Cab/Side Mirror - painted tint to 20%
19. 3.92 rea axle
20. Active-Level Air Suspension
21. Weathertech splash guards
22. Rough Country 20-Inch Cree LED Light Bar Black Series with Cool White DRL
23. JMS Chip - Pedalmax - (https://www.jmschip.com/pedalmax-2018_2020_some-ram-and-jeep-vehicles-px1920dcx4/)
View attachment 66523 View attachment 66524 View attachment 66538 View attachment 66539 View attachment 66528 View attachment 66531 View attachment 66532 View attachment 66533 View attachment 66534 View attachment 66535

How are the tires holding up? Do they wear evenly? Worth the money or a hard pass? Thanks.

 

[kysourmash]

Just installed my Christmas presents! The Putco 60" LED Lightbar and the LUYED LED backup lights:

Looks great! How involved was the install?

 

[Swoleram]

Nitro Ridge Grapplers 305 45 22 2021 Limited Air Ride no level no lift no rub on stock 22s.

 

[TNRamGuy]

Are you sticking with the black overlays on the sport hood? I was wondering if you could do a closer picture of that as I’m leaving that way more than replacing the entire thing. Looks good!

Here is mine from reflective concepts, it is the carbon fiber overlay

 

[Gitter]

Looks great! How involved was the install?

Not too bad. I started by reading this thread on Lightbar installs to help me plan ahead: https://5thgenrams.com/community/threads/tailgate-light-bar.3298/

The hardware is easy to install after that (with the nylon spacers and the trailer wiring harness that is mentioned a lot in the latter pages of that thread). However, it took me a couple hours because I was testing something new in order to eliminate the delay between the tail light blinker and the lightbar's blinker. More info on that is in that thread if you're interested.

I also took extra time to solder and heat-shrinke all of my connections before wrapping them to ensure moisture wouldn't be an issue.

It didn't help that it was just above freezing and I couldn't find my electric heater. Lol

 

[Waterfowler41]

Rough mock ups of my new “Hellduck” fender emblems...

 

[Vinnie.]

Rough mock ups of my new “Hellduck” fender emblems...

woah no way I watch you on YouTube I didn't know you were in Chicago! I just ordered a Rebel, I'm in the western burbs!

 

[Waterfowler41]

woah no way I watch you on YouTube I didn't know you were in Chicago! I just ordered a Rebel, I'm in the western burbs!

West suburbs as well my man! Easier to just say Chicago than to explain 45 min west off 88.

 

[RickWaz]

Not too bad. I started by reading this thread on Lightbar installs to help me plan ahead: https://5thgenrams.com/community/threads/tailgate-light-bar.3298/

The hardware is easy to install after that (with the nylon spacers and the trailer wiring harness that is mentioned a lot in the latter pages of that thread). However, it took me a couple hours because I was testing something new in order to eliminate the delay between the tail light blinker and the lightbar's blinker. More info on that is in that thread if you're interested.

I also took extra time to solder and heat-shrinke all of my connections before wrapping them to ensure moisture wouldn't be an issue.

It didn't help that it was just above freezing and I couldn't find my electric heater. Lol

I too had the Putco 60" lightbar installed and LOVE it. And its white backup LEDs throw out an amazing amount light. My installer wired the Putco so there's no blinker delay. BUT w/ the wiring method he used, the brake light LEDs do not function. So I'd be interested in knowing how you did the wiring so there's no blinker delay AND the brake light LEDs still function.

Take care!

 

[DerekC]

Installed Borla S-Type yesterday with black chrome 5" tips. IT'S AMAZING! I've read a ton of reviews on this and was worried about the overall volume of the system. its not nearly as LOUD as some say. On cold start, it rumbles but nicely without being over powering. Once warmed up it settles in nicely. putting around in the neighborhood (30km/h) you can hardly tell it's after market. BUT once you hit the highway you can unleash the fury! (only if you want to) this exhaust from Borla is amazing. There is no drone at all inside the cab when cruising. I also have the 77 series K&N CAI installed and you can hear it in the cab but only when you get into the throttle, which is perfect. I was debating on the MBRP (Canadian made) and since a buddy has one on his '17 but he even told me to get the Borla. We did a side by side comparison and test drive circuit and it was crazy how much quieter the Borla was. Much nicer for daily driving, but as noted, she screams and it's amazing if you put your foot down.
Borla S-Type 100% no regrets.
K&N CAI model 77 - noticeable torque improvement above 4k RPM. - no regrets.

 

[RRRAAAAMMMM2020]

I too had the Putco 60" lightbar installed and LOVE it. And its white backup LEDs throw out an amazing amount light. My installer wired the Putco so there's no blinker delay. BUT w/ the wiring method he used, the brake light LEDs do not function. So I'd be interested in knowing how you did the wiring so there's no blinker delay AND the brake light LEDs still function.

Take care!

Based on the video there still is a slight delay. I don't believe there is currently a way to have both the brake light work and no delay for OP7 or Putco

 

[Timeless]

Played in the snow this weekend in Pidgeon Forge, TN.

Stock AS tires did okay in 4WD-HI.