What did you do to your Ram today???

[Sidewinder81]

windows

Looks awfully dark on the rears to be 80%.

Just to clarify, it’s 80% over the factory (~20%) tint. Matches up perfectly with the 15% front

 

[coffeyman76]

Pictures please




Sent from my iPhone using Tapatalk

DIY Leveling Kit
2" Daystar Spacers
Nitto Ridge Grappler 305/45R22
Match front door window tint (20%)
35% front windshield

0.625 inches is difference in rear and front. Will tweak with time.

First and 3rd picture is Normal setting. Tailgating picture is entry/exit.

 

[wahudiditagain]

Added some stripes. Matte black over the Diamod Black. I've always had a thing for flat black over gloss black.

 

[LNDRCKT]

Went camping to Eastern Washington this weekend.

 

[Mustangmike66]

Removed my tow hooks and painted them red.

I’ll install them tomorrow when the paint dries.


Sent from my iPhone using Tapatalk

 

[Zeeya]

Trimmed lower section off of license plate and mounted my LEDS reverse light back on it. (This allowed me to drop license plate roughly 1/2" as seen in pic), No tailgate rubbing issues now. My driveway drops off at steep angle right at rear of bumper. Flat ground, you would have had a little more light just below the bumper, but not right up to it. Still have a cut off line of light.

 

[shrubs2000]

and my radio has been playing dual audio sources at the same time

Mine did this a few times last week as well. It was strange as one source was spotify and the other was XM radio. The XM wasn't from one of the presets but appears to be the XM non-subscription channel. Rebooted my phone and it cleared up.

 

[TNSmokee]

Got my Billet Technology catch can installed

 

[cblayloc]

Sure here you go!

What is the height from the ground to the top of the antenna on the cab? Wanted to do almost the same thing, but want to make sure it fits in the garage.

 

[fontpaul]

Finally got my lift and new shoes. I think I am one of the few that went from 22in wheels down to 18s but I think it looks awesome. I added the Mopar 2" lift, Mopar 1" spacers in the front, Mopar 18" bead lock wheel color matched and 35/12.5/18 BF Goodrich KO2s. I totally forgot about the lug nuts so I need to order black ones.

(have the premium 22in wheels for sale with only 5k miles on them)

 

[rockerdan]

View attachment 35040
Went camping to Eastern Washington this weekend.

Can you expand on your racks please? The rear in particular looks like it may sit into the stake pockets.

Thanks

 

[LNDRCKT]

Can you expand on your racks please? The rear in particular looks like it may sit into the stake pockets.

Thanks

I made the rear rack to fit into the rear stake pockets. It’s then bolted down thru the front side of the pocket. Works great for my kayak and paddle board.

 

[Hackmunch]

installed leds and tinted 3rd brake light.

 

[Bluelinebuild]

Vinyl tinted my third brake light...used some leftover vinyl tint from my old truck so it cost me nothing but 20min of my time.

 

[Bluelinebuild]

Finally got my lift and new shoes. I think I am one of the few that went from 22in wheels down to 18s but I think it looks awesome. I added the Mopar 2" lift, Mopar 1" spacers in the front, Mopar 18" bead lock wheel color matched and 35/12.5/18 BF Goodrich KO2s. I totally forgot about the lug nuts so I need to order black ones.

(have the premium 22in wheels for sale with only 5k miles on them)

View attachment 35090 View attachment 35091

Beautiful truck, sometimes I regret not getting that delmonico red...sometimes

 

[Bluelinebuild]

Added some stripes. Matte black over the Diamod Black. I've always had a thing for flat black over gloss black.



View attachment 35037

View attachment 35038

Looks great, i was considering doing the same. Where did you get the kit from?

 

[fontpaul]

Beautiful truck, sometimes I regret not getting that delmonico red...sometimes

Thanks

 

[WasatchBack]

Added some stripes. Matte black over the Diamod Black. I've always had a thing for flat black over gloss black.





View attachment 35038

Looks awesome. My OCD is suggesting black license plate screws though

 

[rockerdan]

I made the rear rack to fit into the rear stake pockets. It’s then bolted down thru the front side of the pocket. Works great for my kayak and paddle board.

Nice work!

I used to carry ladders all the time, but now I only carry them a few times per year. So Im leaning toward a simpler ladder rack setup that is quickly removed.

I liked your idea of using the rear stake pockets, and I see BACK RACK now has a "rear bar" they offer. It simply slides into the rear stake pockets for quick install/removal. This along with a simple single roof rack/cross bar will be a nice solution for long items. Should still allow for flush tonneau operation too.

Truck Bed Accessories | Rear Bar

backrack.ca

 

[wahudiditagain]

Looks awesome. My OCD is suggesting black license plate screws though

Not a bad call. I don't notice them what with Ohio's bright plates. Having an all black truck with white plates and blue/red lettering is irritating. Next year we get to take the front plate off as it will be longer be required.