5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

I installed this in my Limited. Contrary to the install instructions, it is NOT necessary to remove the tabs. The only thing I did was cut the rubber mat that lines the console bottom so it would fit with the Lockerdown and also remove (unclip) the little divider baffle (with the previous generations of the Ram on it). BTW, because the Limited's cupholder tray is bigger, that makes the safe smaller. It fits my VP9 in a small holster and an extra magazine. That's it. Just an FYI.
THANKS for the details Reverse! I'll be ordering one today. Take care.
 
That's a great upgrade. BUT sadly I had to return mine, because I failed to read the "fine-print": RAM 1500 Crew Cab 2019-Current with a fixed floor OEM console. NOTE: Drilling required. Does not work with the RAM sliding console trays that have lids on the cup holders, as seen on RAM Longhorn and Limited trims.
You're welcomehttps://www.lockerdown.com/i-145-console-safe-for-2019-2020-dodge-ram-except-classic-model-ld2078l-lower-profile-to-fit-the-longhorn-limited-only.html
 
You're welcomehttps://www.lockerdown.com/i-145-console-safe-for-2019-2020-dodge-ram-except-classic-model-ld2078l-lower-profile-to-fit-the-longhorn-limited-only.html
 
Nothing major, just put one of these on (just the tailgate mat...already have a Dee Zee thick rubber bed mat...no spray in bed liner).

Wifey got it for me for our anniversary. It's the little things... :)

Edited to show the actual picture vs. a stock photo.

tailgate mat.jpg
 
Last edited:
Nothing major, just put one of these on (just the tailgate mat...already have a Dee Zee thick rubber bed mat...no spray in bed liner).

Wifey got it for me for our anniversary. It's the little things... :)

ex_q80_w700_h500_images_ePIM_original_XBR-BedRug-Mat-Dodge-Ram-Tailgate.jpg
Very cool that she got something for your truck... good woman.
 
Last edited:
Any in cab drone?

None, great rumble when driving.
On highway ( 120 - 140km/h ) with auto cruise controle almost zero sound.

Definitely no drone.

Also ( for me important ) not that loud with cold start early in the morning.
 
Would love to see and hear this!
There are a lot of clips online showing the muffler and sound. Nice low rumble. Not obnoxious.
 

Attachments

  • 20200306_123757.jpg
    20200306_123757.jpg
    87.2 KB · Views: 105
  • 20200306_123749.jpg
    20200306_123749.jpg
    88.4 KB · Views: 105
  • Inked20200306_123742_LI.jpg
    Inked20200306_123742_LI.jpg
    190.7 KB · Views: 103
Last edited:
Ordered the just released B2Fabrication resonator delete kit with 5” tips, to go with my B2Fab magnaflow (now b2fab uses their own muffler!) bolt on.

Also picked up a set of Limited 20” wheels with Conti AT tires but more importantly, got to hang with my boy @PorBoy

I think motofab 2” level is next up.

Once it’s all done and it gets a much needed bath I’ll get some pics and sound clips of the exhaust posted up.
 
Ordered the just released B2Fabrication resonator delete kit with 5” tips, to go with my B2Fab magnaflow (now b2fab uses their own muffler!) bolt on.

Also picked up a set of Limited 20” wheels with Conti AT tires but more importantly, got to hang with my boy @PorBoy

I think motofab 2” level is next up.

Once it’s all done and it gets a much needed bath I’ll get some pics and sound clips of the exhaust posted up.

I don’t see any black tip options. Do you have pic of what you purchased?


Sent from my iPhone using Tapatalk
 
I don’t see any black tip options. Do you have pic of what you purchased?


Sent from my iPhone using Tapatalk

They don’t have a 5” black tip option yet unfortunately so I went with SS. They are very reasonable when you buy the kit, like $65/ea. I figured if I didn’t like the SS I could always look into coating them or selling them and buying different ones.
 

Users who are viewing this thread

Back
Top