What did you do to your Ram today???

[WasatchBack]

Washed, polished, and installed Cquartz ceramic coating on the paint this weekend. Nice and shiny! Also installed Husky Liners mud flaps.

Next up clear paint protection film on the front. First time giving that a shot but ordered a pre cut 3M kit.

Polish off the coating before applying ppf, it will not stick

 

[Thatsme06]

View attachment 28310

I upgraded my stock halogen head lights and tail lights to the Rebel / Blackout OEM LEDs.

Looks awesome! This is exactly what I would like to do, If you don't mind me asking where did you order everything and what did it run to do the full swap?

 

[jorgeanania]

Better Pic. Mod please move this to “What did you do to your Ram Yesterday” if necessary.

Sent from my iPhone using Tapatalk

What set lift tire set up you have on your truck?

 

[moosem]

Looks awesome! This is exactly what I would like to do, If you don't mind me asking where did you order everything and what did it run to do the full swap?

Thank you! I'm very pleased with the results! This is how the truck is supposed to look!!

The first thing you need is the halogen to LED adapter harness. As far as I know, the only place to get one is from Retro Shop. It was $175.00 https://shop.retroshop.us/ProductDetails.asp?ProductCode=5G.ADAPT

Black Headlights:
Left - 68316089AG
Right - 68316088AG

Black Tail Lights:
Left - 55112993AD
Right - 55112992AD

I ordered the tail lights from rockauto.com for ~$600 , but they don’t offer the blackout headlights, so I ordered those from Bam Wholesale. They were $1050 for the pair.

Including the harness, tax, shipping, etc., this is around a $2000 upgrade. Not cheap.

The headlight installation is a little tricky, but definitely manageable. The installation guide from Retro Shop is very good. I took my time, I didn't break anything and had no leftover hardware when I was done!!

 

[Rich51]

Well I wasn’t able to find the truck I wanted with the Utility Rail system so I made my own. I like how this is slimmer as well so I’m not too upset. Etrack from harbor freight for $20 each then the clamps $5 each. It will work for what I need it for.

 

[Kevinc13]

I just got the Mopar 2" lift installed along with a set of Fuel Tech Antyracite wheels and Nitto Ridge Grappler tires in 33 11.5 20. Here are a few pics until I get it cleaned.

 

[ThunderBolt]

Bit the bullet and ordered the Lomax and full bedrug through Truck Alterations. 1020.00 shipped for both. I should be installing this weekend.

 

[jdmartin]

Well, I got my Leer truck cap installed today. Rainy weather so no pics today but will try to get some in the morning.

 

[Rampat]

Bit the bullet and ordered the Lomax and full bedrug through Truck Alterations. 1020.00 shipped for both. I should be installing this weekend.

I got the Lomax and went with the Bedrug XLT through struck Alterations to save money. $855 shipped for both. I think the full Bedrug looks so much better but since I have the factory spray in liner I decided to save some money for other mods. Jealous of your setup though.

 

[Rampat]

I just got the Mopar 2" lift installed along with a set of Fuel Tech Antyracite wheels and Nitto Ridge Grappler tires in 33 11.5 20. Here are a few pics until I get it cleaned. View attachment 28357View attachment 28358View attachment 28359

That’s it. I’m doing the Mopar 2” lift. Thank you for sharing. What are the specs on your wheels? 20x9? 20x10? What about offset?

 

[Kevinc13]

That’s it. I’m doing the Mopar 2” lift. Thank you for sharing. What are the specs on your wheels? 20x9? 20x10? What about offset?

20x9 +1 offset

 

[DJ85]

Added AVS stick on vent visors. I’m not sure why they took so long to make them as I couldn’t find them anywhere. I’ve always preferred the stick on ones.

 

[sizmtrz]

View attachment 28310

I upgraded my stock halogen head lights and tail lights to the Rebel / Blackout OEM LEDs.

Is this as easy as plug and play or are their modules and other things needed for the conversion? May I ask the price of the led lights?

 

[moosem]

Is this as easy as plug and play or are their modules and other things needed for the conversion? May I ask the price of the led lights?

What did you do to your Ram today???

Washed, polished, and installed Cquartz ceramic coating on the paint this weekend. Nice and shiny! Also installed Husky Liners mud flaps. Next up clear paint protection film on the front. First time giving that a shot but ordered a pre cut 3M kit. Polish off the coating before applying ppf...

5thgenrams.com

 

[Thatsme06]

Thank you! I'm very pleased with the results! This is how the truck is supposed to look!!

The first thing you need is the halogen to LED adapter harness. As far as I know, the only place to get one is from Retro Shop. It was $175.00 https://shop.retroshop.us/ProductDetails.asp?ProductCode=5G.ADAPT

Black Headlights:
Left - 68316089AG
Right - 68316088AG

Black Tail Lights:
Left - 55112993AD
Right - 55112992AD

I ordered the tail lights from rockauto.com for ~$600 , but they don’t offer the blackout headlights, so I ordered those from Bam Wholesale. They were $1050 for the pair.

Including the harness, tax, shipping, etc., this is around a $2000 upgrade. Not cheap.

The headlight installation is a little tricky, but definitely manageable. The installation guide from Retro Shop is very good. I took my time, I didn't break anything and had no leftover hardware when I was done!!

Absolutely I couldn't stand the chrome reflector housing so I went with the black housing prior to the LED harness being released. Looks much better but these look really good and love the running lights. Might be a future project but for the price I will wait and hopefully find some 2nd hand.

 

[Rampat]

Well I wasn’t able to find the truck I wanted with the Utility Rail system so I made my own. I like how this is slimmer as well so I’m not too upset. Etrack from harbor freight for $20 each then the clamps $5 each. It will work for what I need it for.
View attachment 28345
View attachment 28346

How much was the cargo bar? Harbor freight as well?

 

[LiveFree]

I got my windows, tail lights, and 3rd brake light tinted.
View attachment 28203View attachment 28204
View attachment 28205
I will be getting these installed tomorrow along with the Mopar 2" lift.
View attachment 28209

What rims are those? Look sharp!

 

[swarggs]

Applied some gloss black vinyl to the pillars between the front and rear windows. A quick 30 minute job that I think looks nice when combined with tinted front windows.

Sent from my SM-G960U1 using Tapatalk

 

[jorgeanania]

Added 1.5” wheel spacers. No trimming of the studs and no rubbing of the tires.

What size tires?

 

[jdmartin]

OK, truck is filthy from working but here's a couple of shots of the Leer 180XR. I like it, as it rained the last 2 days and I was able to leave stuff in the back