Menu
What's new
By:
Filters
What's new
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

T

TBK

Active Member
Joined
Mar 16, 2019
Messages
44
Reaction score
90
Visited the dealer to get my steering wheel replaced, a slight dent repaired (came that way new) and ended up bringing home some new side steps that I installed before the sun went down.

8bcbe430532c7d5faba348cdb18ef597.jpg


a5a2d4edc7973bbe3a2197f46339cb96.jpg


Here’s the steering wheel they are replacing. The material is all stretched and the stitching is bunched up and lumpy. Dealer was super cool about it and just put in the order no questions asked.

b69540f1ec5e658c3391d512fea06706.jpg



Sent from my iPhone using Tapatalk
 
Rampat

Rampat

Ram Guru
Joined
Feb 23, 2019
Messages
941
Reaction score
401
Location
Boca Raton, FL
TBK said:
Visited the dealer to get my steering wheel replaced, a slight dent repaired (came that way new) and ended up bringing home some new side steps that I installed before the sun went down.

//uploads.tapatalk-cdn.com/20190403/8bcbe430532c7d5fab

a348cdb18ef597.jpg

How was the dent? Mine came with a door ding in it that they said they would take care of but it’s right on the crease on the door and I’m worried a dent guy won’t handle it and it will have to be fixed by a body shop and painted.

a5a2d4edc7973bbe3a2197f46339cb96.jpg


Here’s the steering wheel they are replacing. The material is all stretched and the stitching is bunched up and lumpy. Dealer was super cool about it and just put in the order no questions asked.

b69540f1ec5e658c3391d512fea06706.jpg



Sent from my iPhone using Tapatalk
Click to expand...
 
Rtl Colorado

Rtl Colorado

Active Member
Joined
Dec 31, 2018
Messages
95
Reaction score
65
Cost for the Raptor 100.00
Tape and Plastic 20.00
Sand paper acetone 15.00
Spray gun 13.00
3 hrs prep sand and tape off
My mistake was taping off as the product was guaranteed to arrive but was a no show
So I had to leave the truck until the weather warmed back up
Took about a hour to spray
So less than a half a day total
I like the duller look as I have used
All's liner for other projects
 
MG99

MG99

Ram Guru
Joined
Jan 2, 2019
Messages
507
Reaction score
419
Rtl Colorado said:
Cost for the Raptor 100.00
Tape and Plastic 20.00
Sand paper acetone 15.00
Spray gun 13.00
3 hrs prep sand and tape off
My mistake was taping off as the product was guaranteed to arrive but was a no show
So I had to leave the truck until the weather warmed back up
Took about a hour to spray
So less than a half a day total
I like the duller look as I have used
All's liner for other projects
Click to expand...

Nice work. And for about $150 + time. Worth it. Heck I paid just over $600 for RhinerLiner and I know the shop owner. Its up to 700 for a full bed/gate spray.
 
T

TBK

Active Member
Joined
Mar 16, 2019
Messages
44
Reaction score
90
Rampat said:
How was the dent? Mine came with a door ding in it that they said they would take care of but it’s right on the crease on the door and I’m worried a dent guy won’t handle it and it will have to be fixed by a body shop and painted.
Click to expand...

To be honest, it was not great. What I found is that underneath the door handles of many Rams, including mine, have an indent or depression that I think happens from the stamping. Mine was very noticeable (unfortunately I didn't notice it when I bought it), and the dealer did admit that it seems to be an issue and had their dent guy do his best. But ultimately his best really didn't satisfy me, but I'll live with it. It honestly looked like somebody slammed the door open with the door handle and made a big indent, and I was afraid it would hurt resale.

He was able to get out the biggest depression, and smooth it a bit, but with the door fill and glue inside, there was only so much he could do. They did offer to replace the door, but then I have to do paint matching, have a different SN on the door, etc. Just not worth it.

As long as it's an issue with all of the trucks (and as I walked around the lot I saw a half dozen with the problem) then it's not an issue with just my truck. Most of the new 2019 trucks on the lot had it to some degree (the 2019 classics do not).

I love this truck, but it has to have the thinnest steel and most easily scratchable paint of any vehicle I've owned since my 1997 Honda Civic.
 
Rampat

Rampat

Ram Guru
Joined
Feb 23, 2019
Messages
941
Reaction score
401
Location
Boca Raton, FL
TBK said:
To be honest, it was not great. What I found is that underneath the door handles of many Rams, including mine, have an indent or depression that I think happens from the stamping. Mine was very noticeable (unfortunately I didn't notice it when I bought it), and the dealer did admit that it seems to be an issue and had their dent guy do his best. But ultimately his best really didn't satisfy me, but I'll live with it. It honestly looked like somebody slammed the door open with the door handle and made a big indent, and I was afraid it would hurt resale.

He was able to get out the biggest depression, and smooth it a bit, but with the door fill and glue inside, there was only so much he could do. They did offer to replace the door, but then I have to do paint matching, have a different SN on the door, etc. Just not worth it.

As long as it's an issue with all of the trucks (and as I walked around the lot I saw a half dozen with the problem) then it's not an issue with just my truck. Most of the new 2019 trucks on the lot had it to some degree (the 2019 classics do not).

I love this truck, but it has to have the thinnest steel and most easily scratchable paint of any vehicle I've owned since my 1997 Honda Civic.
Click to expand...

I definitely agree with the thin metal. It’s really disappointing that it’s so cheap. I also noticed that when the wind catches the door when you swing it open that the metal where the door attaches below the A-pillar flexes. My truck is in the body shop from an accident and the 2019 Chevy LD they put me in is much stronger.....I just don’t like the truck.

I’m in a rock and a hard place with my dealer. They want to have the door ding guy do his best, but right on the body line crease it won’t get right. So the body shop I’m at says they can make it 100% doing body work but will have to paint and would have to do both doors to blend it to match and that scares me too.
 
Webbd30

Webbd30

Active Member
Joined
Jan 24, 2019
Messages
73
Reaction score
71
I knocked out my BAK X4 revolver and my HDX running boards.

22bb99436fab3986d8eb3c535dc2ba8b.jpg



Bay Area, California- 2019 RAM 1500 Laramie Crew 4x4, 5'7 Bed, Granite Chrystal, E locker, Black Interior, 5.7 Hemi, 3.92 axle, Level 2 Equip Group, 12in NAV, Advanced Safety Group, Pano Sun Roof, Bed Utility Group, Air suspension, Off Road Group, 20X9 +1 Fuel wheels, 275/65R20 Nitto Ridge Grapplers, Deployable bed step, 33 gallon tank, Ram Box, Trailer break control, Mopar Slush Mats.

Sent from my iPhone using Tapatalk
 
Rtl Colorado

Rtl Colorado

Active Member
Joined
Dec 31, 2018
Messages
95
Reaction score
65
You get 4 bottles in basic kit
I used 3
1 and 1/4 sides
1 and 3/4 on Bottom and Tailgate
I mixed up a little in a dish and cleaned up a
My tape line on tailgate panel as I was a 1/8
Inch wide
Just dabbed it
 
doug55579

doug55579

Active Member
Joined
Mar 22, 2019
Messages
65
Reaction score
81
Location
Massachusetts
The Line-Ex was actually done on Monday, but I took the photo today. I also had the bumper and fascia wrapped with XPEL this morning.
 

Attachments

  • IMG_9371.jpg
    IMG_9371.jpg
    172.2 KB · Views: 143
BThiesing

BThiesing

Active Member
Joined
Nov 6, 2018
Messages
58
Reaction score
94
Within the last week.. LEDs for third brake light/cargo (super bright), and then took a 320 mile trip with the ATV's. Got to finally power wash the cemented upstate-clay-mud off today. Should've gotten mud flaps..
 

Attachments

  • 20190315_132904.jpg
    20190315_132904.jpg
    162.4 KB · Views: 177
  • Snapchat-636061210.jpg
    Snapchat-636061210.jpg
    125.2 KB · Views: 178
You must log in or register to reply here.

Users who are viewing this thread

Total: 166 (members: 0, guests: 166)

Site Vendors

https://www.jasonlewisautomotive.com/

Members online

Total: 2,238 (members: 8, guests: 2,230)
Top