What did you do to your Ram today???

[Jedi9]

Thanks, put it on my shopping list

 

[1BADRAMLIMITED]

Today I changed the transfer case fluid, oil and tire rotation. So far these kenda klevers are doing great and the road noise has become slightly louder but not obnoxious. 6k on them and did great in rain/flood we had a month ago.

Edit: tried to use my oil udder xl it ripped. Lasted all of 2 years sitting in my garage and I clean it off after every change. Tried the zip loc method and it worked until it didn’t…..

Transfer case change was eaaaasy! Took 1 3/4 bags from amsoil (48.11) w/4wd auto

I also went with the 6.4 - 392 scat pack style oil filter (forum members suggested)

 

[boogielander]

Yesterday:
went through Columbia River Gorge. Really pretty place.
Stopped by Bradford Island to see the fish ladder and the locks

I don't remember if I mention this on my prior post or not, but my American flag magnets flew off while a mega semi passed me from the other side.

Then visited the power generator

Then Bridge of the Gods

Finally obligatory Multnomah Falls.

 

[Jedi9]

Today I changed the transfer case fluid, oil and tire rotation. So far these kenda klevers are doing great and the road noise has become slightly louder but not obnoxious. 6k on them and did great in rain/flood we had a month ago.

I have the Kenda's on my Jeep and really like the 35 x 10.5 size. they are quiet on the Jeep. Running Atturos on the Ram and they are noisier but handled well through tropical storm Debbie's standing water this morning, not a slip or a slide

 

[Jedi9]

Yesterday:
went through Columbia River Gorge. Really pretty place.
Stopped by Bradford Island to see the fish ladder and the locks
View attachment 187596
I don't remember if I mention this on my prior post or not, but my American flag magnets flew off while a mega semi passed me from the other side.
View attachment 187597
Then visited the power generator
View attachment 187598
Then Bridge of the Gods
View attachment 187599
Finally obligatory Multnomah Falls.

I've fished out of the Columbia river, beautiful place

 

[Bo-Bearski]

Completed a folding, wood truck bed divider. Not happy with the stain color, might change. Folding allows for easier install and removal. Cheapo latch and hard foam at the ends keeps it secure. Inspired by others on this forum.

 

[boogielander]

I've fished out of the Columbia river, beautiful place

yes!
i need to go back for another trip and fish there too

 

[boogielander]

Yesterday Day 4 (Late post)
Crossed into Canada. Couldn't take picture at the border

So this is the only pic i got with my cellphone lol

Got on Trans Canada Highway to head north

Home for the night

Boogielander Cafe - We got multiple Boogielander in my group, but only 2 CAFE.
CAFE because... kitchen.
Relax after an fruitless day in Vancouver/ Richmond. See my build thread for details.

 

[Dogpatch]

Completed a folding, wood truck bed divider. Not happy with the stain color, might change. Folding allows for easier install and removal. Cheapo latch and hard foam at the ends keeps it secure. Inspired by others on this forum. View attachment 187654
View attachment 187655

View attachment 187656

I have the Ram box extender which also acts as a box divider. Sitting in my basement of course. But I simply cut a 2x6 and slide it down into the slot provided on each side. I use it to hold my sandbags from sliding around in winter.

 

[bigdodge]

Completed a folding, wood truck bed divider. Not happy with the stain color, might change. Folding allows for easier install and removal. Cheapo latch and hard foam at the ends keeps it secure. Inspired by others on this forum. View attachment 187654
View attachment 187655

View attachment 187656

what a nice idea

 

[1BADRAMLIMITED]

I have the Ram box extender which also acts as a box divider. Sitting in my basement of course. But I simply cut a 2x6 and slide it down into the slot provided on each side. I use it to hold my sandbags from sliding around in winter.

That’s a great idea!!

 

[LATXAg]

Well, not what I did, but what might effect us all…

Jeep and Ram maker Stellantis warns union of 2,000 or more potential job cuts at an auto plant outside Detroit

 

[Jako]

Couldn't do anything to my Ram because it is getting a motor replaced , 10 plus weeks and doesn't appear to be any progress.

BUT I did change my avatar to reflect the status of my Ram.

 

[BowDown]

Couldn't do anything to my Ram because it is getting a motor replaced , 10 plus weeks and doesn't appear to be any progress.

BUT I did change my avatar to reflect the status of my Ram.

Can always be worse, you could have a Toyota

 

[Jako]

Can always be worse, you could have a Toyota

Lol, time will tell.

 

[CSPCRX]

Completed a folding, wood truck bed divider. Not happy with the stain color, might change. Folding allows for easier install and removal. Cheapo latch and hard foam at the ends keeps it secure. Inspired by others on this forum. View attachment 187654
View attachment 187655

View attachment 187656

I like this idea. I really like the Ram Box divider but apparently that only works with trucks with Ram Box’s. Simple solution , maybe I need to break out the MiG and make something out of aluminum. Hmmmmmm

 

[Bo-Bearski]

I like this idea. I really like the Ram Box divider but apparently that only works with trucks with Ram Box’s. Simple solution , maybe I need to break out the MiG and make something out of aluminum. Hmmmmmm

I thought ideally if someone could create a composite plastic one, heavy enough, folding like this, with a ram logo... it might sell. I'm surprised China is not all over that idea.!

 

[1BADRAMLIMITED]

I thought ideally if someone could create a composite plastic one, heavy enough, folding like this, with a ram logo... it might sell. I'm surprised China is not all over that idea.!

Isn’t this basically like the mopar option???

Amazon.com

 

[Grape_Ape]

This is the one for the ramboxes.

I spent an hr or so messing with my backup camera. Solid black screen suddenly when leaving a restaurant today. Got home, unplugged all connections and cleaned with contact cleaner. Plugged back up and it worked. Started truck up a little while later and no back up camera again. Updated my uconnect system and now blue screen of death.

Hoping it resolves itself over night. I've got one more uconnect update I can push. Gonna check all the fuses/battery as well. If not guess I'm ordering a new camera.

 

[boogielander]

Yesterday.
Went impromptu offroading through a forest on a tight, deeply rutted and wet trail to go around traffic.
This is the result.


See my build thread for full story.