What did you do to your Ram today???

[MikeyHo808]

Thoughts on the RT's? Recommend? How are they in wet/snow? Noise level?

They are great tires, about as noisy as my Toyo AT3’s I had prior. No snow where I’m at, but they handle fine in the rain. Nice tread pattern, aggressive looking sidewall. If you can get them at a good price I would definitely recommend them. I got lucky and special ordered them through my Navy Exchange tire center and saved about $400.

 

[CHeYeNNe71]

They are great tires, about as noisy as my Toyo AT3’s I had prior. No snow where I’m at, but they handle fine in the rain. Nice tread pattern, aggressive looking sidewall. If you can get them at a good price I would definitely recommend them. I got lucky and special ordered them through my Navy Exchange tire center and saved about $400.

Thanks for the feedback. They're one of the tires I'm contemplating, besides the AT4W which if they're anything like the AT3W they're great, but pricier.

 

[CHeYeNNe71]

Anyone consider Falken Wildpeak AT4W 285/65R20, Amazon has them for $345 each right now. 34.8X11.5

 

[mplaramie]

Anyone consider Falken Wildpeak AT4W 285/65R20, Amazon has them for $345 each right now. 34.6X11.2

I'm looking at those or another set of Toyo AT3'S. Also can't decide if I'm going to use my 22" 4play wheels, stock or buy new 20's. To many decisions.....

 

[CHeYeNNe71]

I'm looking at those or another set of Toyo AT3'S. Also can't decide if I'm going to use my 22" 4play wheels, stock or buy new 20's. To many decisions.....

I'm going 20's and selling OEM 22's to help buy the wheels. I just ordered the tires for that price. Most places have them around $450 each.

 

[Redz72]

I'm going 20's and selling OEM 22's to help buy the wheels. I just ordered the tires for that price. Most places have them around $450 each.

That’s a darn good price. Almost too good to be true. Hopefully they work out well for you.

 

[CHeYeNNe71]

That’s a darn good price. Almost too good to be true. Hopefully they work out well for you.

I'll find out tomorrow. Looks like UPS will be dropping them off. Just got email from UPS.

 

[Checker629]

Today, I installed the MX4 and the fake Ramboxes. Both came out well.

 

[boogielander]

I’ll take some proper pictures and make a post when they come in!

Specs are 20x9 0 w/ 35x12.5x20

nice!
just learned today cost for tires went up 20% (from our distributors). hope you didn't get affected!

 

[boogielander]

Anyone consider Falken Wildpeak AT4W 285/65R20, Amazon has them for $345 each right now. 34.6X11.2

i got at3w and am extremely happy with them. i imagine at4w will be better!

 

[Rock Crawler]

Dam 1k per wheel are they 3 piece or carbon? Thats insane

Velgen split spoke wheels. The Gunmetal looks pretty good, but I’d prefer the Satin Black. I like the look of the VFT6 better, but they are more expensive. The VFF-6 does not come in a 22” wheel, just 24”. I don’t want to go that large. Regardles, neither will happen at those prices.

 

[1BADRAMLIMITED]

nice!
just learned today cost for tires went up 20% (from our distributors). hope you didn't get affected!

I went with a more budget friendly tire. This is my 1st truck and tried to do as much homework as I could to find a good tire and wheel that wouldn’t break the bank.

 

[Utahtrapper]

Found it! It was on the first one, but you had to select Max utility. Definitely not intuitive, or maybe Im just a dummy
Anyway, thanks! Im ordering right now. I travel alot, and this is a great way to use this space.

Its currently a black hole for used napkins, or charging cables

Has yours shipped Yet???

 

[1BADRAMLIMITED]

picked up my truck from dealer for service.

• Trans. Cooler lines
• Passenger & Driver side manifolds (4 bolts extracted)
• Driver side cv axle
• Intermediate shaft

Thank God for my extended warranty the invoice was unbelievable!

 

[Dewey]

picked up my truck from dealer for service.

• Trans. Cooler lines
• Passenger & Driver side manifolds (4 bolts extracted)
• Driver side cv axle
• Intermediate shaft

Thank God for my extended warranty the invoice was unbelievable!

How much? Curious what dealers are charging these days. I haven't paid for out of warranty work in about 25 years. Good to hear you were able to use your extended warranty. Many don't and never get any benefit from all that extra cost. I never bought one.

 

[CHeYeNNe71]

What's it like $165/$185 hour shop labor?

 

[1BADRAMLIMITED]

How much? Curious what dealers are charging these days. I haven't paid for out of warranty work in about 25 years. Good to hear you were able to use your extended warranty. Many don't and never get any benefit from all that extra cost. I never bought one.

Just over $3000 only thing that wasn’t covered was the extraction of the bolts from the block. But the manifolds, gaskets and new hardware were all taken care of through ext. warranty

 

[MikeyHo808]

Just over $2000 only thing that wasn’t covered was the extraction of the bolts from the block. But the manifolds, gaskets and new hardware were all taken care of through ext. warranty

Yikes…good to hear the extended is covering the parts, etc. I am in my extended already, sitting at 38k and counting and already on my second replaced passenger manifold and my first replaced driver side in 3 years of ownership…which today marks 3 years since I purchased it…4/18/2021. Am pretty sure I’ll be replacing a manifold again, only time will tell. Glad you got your truck back in top shape and minimum damage to the wallet.

 

[CHeYeNNe71]

That’s a darn good price. Almost too good to be true. Hopefully they work out well for you.

#PimpStatus

 

[mplaramie]

#PimpStatus
View attachment 181435View attachment 181436View attachment 181437

That was fast. I may have to order some. Got a link?
Did you decide on a wheel and offset? Plan on any trimming/heat gun work? I'm torn between the 285/65/20 or 295/60/20.