What did you do to your Ram today???

[Saskatchewman]

Wired up exhaust cutout. Sounds amazing. Complete detail, polish, and ceramic coating done myself.

 

[Trooper1629]

Added 2.5 fabmoto leveling kit today. 285/65/20 Falken Wildpeak AT3 going on tomorrow. After towing my new camper had to get rid of these passenger rates tires. Here is a before and after pic

 

[JoeRam]

Found out the VIN for my 2500 build. no more doing anything to current 1500

 

[Rampat]

Found out the VIN for my 2500 build. no more doing anything to current 1500

Well that was fast

 

[Rampat]

Added 2.5 fabmoto leveling kit today. 285/65/20 Falken Wildpeak AT3 going on tomorrow. After towing my new camper had to get rid of these passenger rates tires. Here is a before and after pic

View attachment 25751View attachment 25752View attachment 25753View attachment 25754

I cannot wait to see those tires on! Take some good pictures please. I have the same truck and hate those stock tires so much. You’re keeping the stock wheels right?

 

[19Jake]

out with the old
18x9 zero offset
anti-sieze on cap bolts

 

[Lize]

out with the old
18x9 zero offset
anti-sieze on cap bolts

Wot no spacers...size too confusing
Very nice

 

[JoeRam]

Well that was fast

Honestly I wanted the 2500 from the get go, at the time I needed to purchase the 2500 was still the old model. 9 months later, almost like a birth, the 2500 is born and I get to walk away clean on the 1500. It's a long story my friend, and I will leave it at that

 

[Trooper1629]

I cannot wait to see those tires on! Take some good pictures please. I have the same truck and hate those stock tires so much. You’re keeping the stock wheels right?

Yes I’m keeping the stock wheels. I’ll post pics later today after I pick it up.

 

[bigdaddymac]

Added 2.5 fabmoto leveling kit today. 285/65/20 Falken Wildpeak AT3 going on tomorrow. After towing my new camper had to get rid of these passenger rates tires. Here is a before and after pic

View attachment 25751View attachment 25752View attachment 25753View attachment 25754

In for pics on this setup.

 

[Love2driveRAM19]

Wired up exhaust cutout. Sounds amazing. Complete detail, polish, and ceramic coating done myself. View attachment 25743View attachment 25744View attachment 25745

Bet ya enjoying that exhaust cutout!!!!!!!

Did you get the kind you can turn off/on?

I took road trip yesterday up to St Petersburg, Florida and really enjoyed on the highway the quietness of the stock sound....then turned it on few times to get my RUMBLE RUMBLE sound fix....lmao!!!!

 

[Love2driveRAM19]

In for pics on this setup.

Yes post the pics!!!!

I love my Falken AT3"s I had purchased them for my old truck 2000 RAM 1500 but I turned around and put them on my new 19RAM.

 

[Runningwithbeers]

Yes post the pics!!!!

I love my Falken AT3"s I had purchased them for my old truck 2000 RAM 1500 but I turned around and put them on my new 19RAM.

Got to agree with you there the aftermarket Wildpeak A/T 3W were a great tire on my Grand Cherokee for 40K miles. I just put them on the 1500 last month but still think they're great. Only place they felt a little unhappy was deep clay aside from that they hooked up well.

 

[Love2driveRAM19]

Took a road trip yesterday up the WestCoast of Florida to St Petersburg. Trip was great except the Love Bugs ugh!!!! Followed up with a trip through the car wash not too long ago today. It got approx 99% of the gunk off (I will get the rest off). My body can't deal with the laborious task of washing/waxing--car wash not bad. Love Bugs were terrible on US-41...until I could get to the main highway I-75. The windshield was way worse as I had to stop and clean it off before I returned back home.

 

[jloops]

Dryer sheets work great to remove love bugs. All you need is a little bit of water and a dryer sheet to scrub the splats from your vehicle.

 

[Love2driveRAM19]

Dryer sheets work great to remove love bugs. All you need is a little bit of water and a dryer sheet to scrub the splats from your vehicle.

Jloops,
Oh yeah!!!! Most of us Floridians (transplant or not) know about the bounce dryer sheets(ugh some years back that extra super ridiculous Love Bug season---really nasty). There has been some debates about it scratching clear coat but I have used them successfully in the past.

Side note---what size tires do you have, I see in profile it states 22" but curious about rest of tire specs (side walls) with your Bora 2" spacers. Post pic please!!!!! Any rubbing? This is the route I am going but thinking the 2" will be too much for my front tires which have taller side walls Falken 275/60/20. Thanks!!!

 

[jloops]

Jloops,
Oh yeah!!!! Most of us Floridians (transplant or not) know about the bounce dryer sheets(ugh some years back that extra super ridiculous Love Bug season---really nasty). There has been some debates about it scratching clear coat but I have used them successfully in the past.

Side note---what size tires do you have, I see in profile it states 22" but curious about rest of tire specs (side walls) with your Bora 2" spacers. Post pic please!!!!! Any rubbing? This is the route I am going but thinking the 2" will be too much for my front tires which have taller side walls Falken 275/60/20. Thanks!!!

Running the stock 22" wheels and tires - 285/45/22. No rubbing.

 

[19Jake]

Very nice

$528 shipped including tax & hub centric rings @DiscountTire

 

[Lize]

$528 shipped including tax & hub centric rings @DiscountTire
View attachment 25792View attachment 25793

Look great on and very good price, don’t suppose they’d ship to the UK at that rate
I’ve bought some second hand 20” Garson wheels for my Jap import van today so no more shopping for me this week.

 

[Jhill]

its the best. my 12 yr old son helped me install a bunch of things on my jeep. And he was there with me when I broke a body bolt. (not good!!!). He said he wanted to keep the broken bolt. I asked why. He thought it was cool and that some day he didn't want to make the same mistake.

........and it reminds him of the day Dad taught him new curse words....lol.....