5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
324
Reaction score
492
Location
Gilbert Arizona
Britt, aka Water Fowler 41 sent over some measurements for a light bar bracket he designed to install a 30" light bar. We put our spin on it and are going to producing these. We ordered a full sheet from laser cutting. Once we get our laser and powder coat costs locked down, we will have a price for these. Thank you Britt for sending this over. We will be tig welding the 90 degree. We incorporated a tab and slot so the go in the same place every time and also allows us to offer a weld it yourself kit if there is enough interest.

IMG_8854.jpg IMG_8858.PNG
 

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
324
Reaction score
492
Location
Gilbert Arizona
These are going up on the website today. I'm getting several sets to powder coat and will start shipping as soon as I get them back from powder coat. They are saying three weeks but It's hard to say. Once these are gone we will have to put in another order with laser.
 

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
324
Reaction score
492
Location
Gilbert Arizona
U doing a full kit with brackets and lightbar?
I’m working on a contact with Tomar to see if we can become a dealer and offer a kit. We will be making ditch light/ A pillar brackets soon too so we definitely want to hook up with a light manufacturer and offer their products.
 

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
324
Reaction score
492
Location
Gilbert Arizona
Is this for a 30” straight or curved bar? Will they fit any brand 30” dual row bars or single row?
I can give you the measurements. Based on the area I don’t see any reason you couldn’t use a curved or flat. The area is curved and it’s pretty open so I can’t see why either wouldn’t work. As far as brands, I can give you measurements between the brackets buck can’t speak for every brand out there.
 

Dyne

Member
Joined
May 7, 2020
Messages
11
Reaction score
12
I can give you the measurements. Based on the area I don’t see any reason you couldn’t use a curved or flat. The area is curved and it’s pretty open so I can’t see why either wouldn’t work. As far as brands, I can give you measurements between the brackets buck can’t speak for every brand out there.
I would love measurements please. That would help me to determine what brand and kind of bar that will work. Do these bolt up to an existing place on the frame or will I need to drill holes? Also just curious about the “gear” looking cutout, is this for a reason or just something you do on all your products?
 

Shifts And Grins Fab

5thGenRams Vendor
5thGenRams Vendor
Joined
Jul 8, 2020
Messages
324
Reaction score
492
Location
Gilbert Arizona
I would love measurements please. That would help me to determine what brand and kind of bar that will work. Do these bolt up to an existing place on the frame or will I need to drill holes? Also just curious about the “gear” looking cutout, is this for a reason or just something you do on all your products?
It is designed to go into existing holes. There are many places to drill holes along the piece it bolts to if you wanted a shorter light bar. The gear cutout is our company logo. We try to put it on everything we do.
 

Users who are viewing this thread

Top