Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I’m not sure, but I would think not unless there is some electric switch/latch connected to them to communicate to the BCM
I only ask because each Rambox lid latch is electric and when open there is a light in the lid that seems to timeout when the bed lights do if on at the same time. This makes me think that the lights are controlled by the BCM like everything else on this truck.
Well, I tried it and nothing yet. The only adaptation I could find for Performance Pages was called RACE Automatic Activation Performance Page-Customer Settings Menu Enable/Disable. I enabled it, reset the ECU's etc but the pages does not show up. I am betting I am missing something simple but I cannot figure out what that is. Hoping @Jimmy07 or one of the other experts has some thoughts on this. Not a huge deal, but not it is a challenge!
You need to disable connected services for those to show up. Go to Modules > body controller > configuration, and search for ECU Configuration 18 Connected Services, and turn that off.Well, I tried it and nothing yet. The only adaptation I could find for Performance Pages was called RACE Automatic Activation Performance Page-Customer Settings Menu Enable/Disable. I enabled it, reset the ECU's etc but the pages does not show up. I am betting I am missing something simple but I cannot figure out what that is. Hoping @Jimmy07 or one of the other experts has some thoughts on this. Not a huge deal, but not it is a challenge!
Thanks @Jimmy07 That worked to get the pages in the center dash, but they haven't shown up in the radio yet. I also now have a U0402 code that pops up and wont stay cleared. The bypass cable and ODB dongle is still connected so I suppose that could cause it or is that part of the Connected Services disable? I did get that code once before when trying to work on disabling the 3 horn honk. At that time, I think the bypass cable and dongle may have still been connected then too, so I will pull all that see see what happens. I am guessing the Connected Services disable has nothing to do with that.
Is there any way to actually make all the gauges and performance meters work within the pages?
If you have newest firmware update for your TazerDT, it will enable the mirror.
It’s there also a wiring kit for this?
No wiring kit. It's a live feature of the TazerDT. Meaning it has to stay plugged in
